rtt-f030/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h

116 lines
2.7 KiB
C
Raw Normal View History

2014-08-30 00:19:16 +08:00
/**
*****************************************************************************
* @file cmem7_conf.h
*
* @brief CMEM7 config file
*
*
* @version V1.0
* @date 3. September 2013
*
* @note
*
*****************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
*****************************************************************************
*/
#ifndef __CMEM7_CONF_H
#define __CMEM7_CONF_H
#define _ADC
#define _AES
#define _CAN
#define _DDR
#define _DMA
#define _EFUSE
#define _ETH
#define _FLASH
#define _GPIO
#define _I2C
#define _MISC
#define _RTC
#define _SPI
#define _TIM
#define _UART
#define _USB
#define _WDG
2015-05-12 15:44:57 +08:00
//#define _MARVELL
//#define _IP1826D
#define _M7NORFLASH
#define _ME_6095_F
2014-08-30 00:19:16 +08:00
#define USE_FULL_ASSERT 1
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function which reports
* the name of the source file and the source line number of the call
* that failed. If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((unsigned char *)__FILE__, __LINE__))
static void assert_failed(unsigned char* file, unsigned long line) {
while (1) {
;
}
}
#else
#define assert_param(expr) ((void)0)
#endif /* USE_FULL_ASSERT */
typedef enum _BOOL {FALSE = 0, TRUE = 1} BOOL;
/**
* System clock frequency, unit is Hz.
*/
#define SYSTEM_CLOCK_FREQ 300000000
//250000000
2015-05-12 15:44:57 +08:00
//300000000
2014-08-30 00:19:16 +08:00
/**
* @brief usecond delay
* @note It can't delay in an accurate time
* @param[in] usec usecond to be delay
* @retval None
*/
static void udelay(unsigned long usec) {
unsigned long count = 0;
unsigned long utime = SYSTEM_CLOCK_FREQ / 1000000 * usec;
while(++count < utime) ;
}
/**
* UART definition for print
*/
#define PRINT_UART UART2
/**
* DDR type definition
*/
#define DDR_TYPE 3 // 2 for DDR2, 3 for DDR3
#if (DDR_TYPE == 3)
# define DDR_SIZE (256 << 20)
#elif (DDR_TYPE == 2)
# define DDR_SIZE (128 << 20)
#else
# error
#endif
#endif /* __CMEM7_CONF_H */