chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/rm48x50/HALCoGen/source/system.c

577 lines
20 KiB
C
Raw Normal View History

add rm48x50 bsp and libcpu We currently only support building with CCS and SCons is not using. bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file. You may need to regenerate the source file as you like, providing that: 1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The channel 5 in enabled and connected to IRQ. 2, RTI driver is enabled and compare3 source is selected to counter1 and the compare3 will generate tick in the period of 10ms. This value is coresponding with RT_TICK_PER_SECOND in rtconfig.h. In CCS, you need to create a new CCS project and create link folders pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember to add the include path to the Build Properties.
2013-05-24 10:04:51 +08:00
/** @file system.c
* @brief System Driver Source File
* @date 23.May.2013
* @version 03.05.01
*
* This file contains:
* - API Functions
* .
* which are relevant for the System driver.
*/
/* (c) Texas Instruments 2009-2013, All rights reserved. */
/* USER CODE BEGIN (0) */
/* USER CODE END */
/* Include Files */
#include "system.h"
#include "sys_selftest.h"
#include "sys_pcr.h"
#include "pinmux.h"
/* USER CODE BEGIN (1) */
/* USER CODE END */
/** @fn void systemInit(void)
* @brief Initializes System Driver
*
* This function initializes the System driver.
*
*/
/* USER CODE BEGIN (2) */
/* USER CODE END */
void setupPLL(void)
{
/* USER CODE BEGIN (3) */
/* USER CODE END */
/** - Configure PLL control registers */
/** @b Initialize @b Pll1: */
/** - Setup pll control register 1:
* - Setup reset on oscillator slip
* - Setup bypass on pll slip
* - setup Pll output clock divider to max before Lock
* - Setup reset on oscillator fail
* - Setup reference clock divider
* - Setup Pll multiplier
*/
systemREG1->PLLCTL1 = 0x00000000U
| 0x20000000U
| ((0x1FU)<< 24U)
| 0x00000000U
| ((6U - 1U)<< 16U)
| ((150U - 1U)<< 8U);
/** - Setup pll control register 2
* - Enable/Disable frequency modulation
* - Setup spreading rate
* - Setup bandwidth adjustment
* - Setup internal Pll output divider
* - Setup spreading amount
*/
systemREG1->PLLCTL2 = 0x00000000U
| (255U << 22U)
| (7U << 12U)
| ((2U - 1U)<< 9U)
| 61U;
/** @b Initialize @b Pll2: */
/** - Setup pll2 control register :
* - setup Pll output clock divider to max before Lock
* - Setup reference clock divider
* - Setup internal Pll output divider
* - Setup Pll multiplier
*/
systemREG2->PLLCTL3 = ((2U - 1U) << 29U)
| ((0x1FU)<< 24U)
| ((6U - 1U)<< 16U)
| ((150U - 1U) << 8U);
/** - Enable PLL(s) to start up or Lock */
systemREG1->CSDIS = 0x00000000U
| 0x00000000U
| 0x00000008U
| 0x00000080U
| 0x00000000U
| 0x00000000U
| 0x00000000U;
}
void trimLPO(void)
{
/* USER CODE BEGIN (4) */
/* USER CODE END */
/** @b Initialize Lpo: */
/** Load TRIM values from OTP if present else load user defined values */
if(LPO_TRIM_VALUE != 0xFFFFU)
{
systemREG1->LPOMONCTL = (1U << 24U)
| LPO_TRIM_VALUE;
}
else
{
systemREG1->LPOMONCTL = (1U << 24U)
| (16U << 8U)
| 8U;
}
/* USER CODE BEGIN (5) */
/* USER CODE END */
}
void setupFlash(void)
{
/* USER CODE BEGIN (6) */
/* USER CODE END */
/** - Setup flash read mode, address wait states and data wait states */
flashWREG->FRDCNTL = 0x00000000U
| (3U << 8U)
| (1U << 4U)
| 1U;
/** - Setup flash access wait states for bank 7 */
FSM_WR_ENA_HL = 0x5U;
EEPROM_CONFIG_HL = 0x00000002U
| (3U << 8U) ;
/* USER CODE BEGIN (7) */
/* USER CODE END */
/** - Disable write access to flash state machine registers */
FSM_WR_ENA_HL = 0xAU;
/** - Setup flash bank power modes */
flashWREG->FBFALLBACK = 0x00000000U
| (SYS_ACTIVE << 14U)
| (SYS_SLEEP << 12U)
| (SYS_SLEEP << 10U)
| (SYS_SLEEP << 8U)
| (SYS_SLEEP << 6U)
| (SYS_SLEEP << 4U)
| (SYS_ACTIVE << 2U)
| SYS_ACTIVE;
/* USER CODE BEGIN (8) */
/* USER CODE END */
}
void periphInit(void)
{
/* USER CODE BEGIN (9) */
/* USER CODE END */
/** - Disable Peripherals before peripheral powerup*/
systemREG1->CLKCNTL &= 0xFFFFFEFFU;
/** - Release peripherals from reset and enable clocks to all peripherals */
/** - Power-up all peripherals */
pcrREG->PSPWRDWNCLR0 = 0xFFFFFFFFU;
pcrREG->PSPWRDWNCLR1 = 0xFFFFFFFFU;
pcrREG->PSPWRDWNCLR2 = 0xFFFFFFFFU;
pcrREG->PSPWRDWNCLR3 = 0xFFFFFFFFU;
/** - Enable Peripherals */
systemREG1->CLKCNTL |= 1U << 8U;
/* USER CODE BEGIN (10) */
/* USER CODE END */
}
void mapClocks(void)
{
/* USER CODE BEGIN (11) */
/* USER CODE END */
/** @b Initialize @b Clock @b Tree: */
/** - Disable / Enable clock domain */
systemREG1->CDDIS= (FALSE << 4U ) /* AVCLK 1 OFF */
|(TRUE << 5U ) /* AVCLK 2 OFF */
|(FALSE << 8U ) /* VCLK3 OFF */
|(FALSE << 9U ) /* VCLK4 OFF */
|(FALSE << 10U) /* AVCLK 3 OFF */
|(FALSE << 11U); /* AVCLK 4 OFF */
/* Work Around for Errata SYS#46:
*
* Errata Description:
* Clock Source Switching Not Qualified with Clock Source Enable And Clock Source Valid
* Workaround:
* Always check the CSDIS register to make sure the clock source is turned on and check
* the CSVSTAT register to make sure the clock source is valid. Then write to GHVSRC to switch the clock.
*/
/** - Wait for until clocks are locked */
while ((systemREG1->CSVSTAT & ((systemREG1->CSDIS ^ 0xFFU) & 0xFFU)) != ((systemREG1->CSDIS ^ 0xFFU) & 0xFFU))
{
} /* Wait */
/* USER CODE BEGIN (12) */
/* USER CODE END */
/* Now the PLLs are locked and the PLL outputs can be sped up */
/* The R-divider was programmed to be 0xF. Now this divider is changed to programmed value */
systemREG1->PLLCTL1 = (systemREG1->PLLCTL1 & 0xE0FFFFFFU)|((1U - 1U)<< 24U);
systemREG2->PLLCTL3 = (systemREG2->PLLCTL3 & 0xE0FFFFFFU)|((1U - 1U)<< 24U);
/** - Map device clock domains to desired sources and configure top-level dividers */
/** - All clock domains are working off the default clock sources until now */
/** - The below assignments can be easily modified using the HALCoGen GUI */
/** - Setup GCLK, HCLK and VCLK clock source for normal operation, power down mode and after wakeup */
systemREG1->GHVSRC = (SYS_PLL1 << 24U)
| (SYS_PLL1 << 16U)
| SYS_PLL1;
/** - Setup synchronous peripheral clock dividers for VCLK1, VCLK2, VCLK3 */
systemREG1->CLKCNTL = (systemREG1->CLKCNTL & 0xF0F0FFFFU)
| (1U << 24U)
| (1U << 16U);
systemREG2->CLK2CNTL = (systemREG2->CLK2CNTL & 0xFFFFF0F0U)
| (1U) << 8U
| (1U);
/* USER CODE BEGIN (13) */
/* USER CODE END */
/** - Setup RTICLK1 and RTICLK2 clocks */
systemREG1->RCLKSRC = (1U << 24U)
| (SYS_VCLK << 16U)
| (1U << 8U)
| SYS_VCLK;
/** - Setup asynchronous peripheral clock sources for AVCLK1 and AVCLK2 */
systemREG1->VCLKASRC = (SYS_VCLK << 8U)
| SYS_VCLK;
systemREG2->VCLKACON1 = ((1U - 1U ) << 24U)
| (0U << 20U)
| (SYS_VCLK << 16U)
| ((1U - 1U ) << 8U)
| (0U << 4U)
| SYS_VCLK;
/* USER CODE BEGIN (14) */
/* USER CODE END */
}
void systemInit(void)
{
/* USER CODE BEGIN (15) */
/* USER CODE END */
/* Configure PLL control registers and enable PLLs.
* The PLL takes (127 + 1024 * NR) oscillator cycles to acquire lock.
* This initialization sequence performs all the tasks that are not
* required to be done at full application speed while the PLL locks.
*/
setupPLL();
/* USER CODE BEGIN (16) */
/* USER CODE END */
/* Run eFuse controller start-up checks and start eFuse controller ECC self-test.
* This includes a check for the eFuse controller error outputs to be stuck-at-zero.
*/
efcCheck();
/* USER CODE BEGIN (17) */
/* USER CODE END */
/* Enable clocks to peripherals and release peripheral reset */
periphInit();
/* USER CODE BEGIN (18) */
/* USER CODE END */
/* Configure device-level multiplexing and I/O multiplexing */
muxInit();
/* USER CODE BEGIN (19) */
/* USER CODE END */
/* Wait for eFuse controller self-test to complete and check results */
if ((!checkefcSelfTest()) !=0U) /* eFuse controller ECC logic self-test failed */
{
efcClass2Error(); /* device operation is not reliable */
}
/* USER CODE BEGIN (20) */
/* USER CODE END */
/** - Set up flash address and data wait states based on the target CPU clock frequency
* The number of address and data wait states for the target CPU clock frequency are specified
* in the specific part's datasheet.
*/
setupFlash();
/* USER CODE BEGIN (21) */
/* USER CODE END */
/** - Configure the LPO such that HF LPO is as close to 10MHz as possible */
trimLPO();
/* USER CODE BEGIN (23) */
/* USER CODE END */
/** - Wait for PLLs to start up and map clock domains to desired clock sources */
mapClocks();
/* USER CODE BEGIN (24) */
/* USER CODE END */
/** - set ECLK pins functional mode */
systemREG1->SYSPC1 = 0U;
/** - set ECLK pins default output value */
systemREG1->SYSPC4 = 0U;
/** - set ECLK pins output direction */
systemREG1->SYSPC2 = 1U;
/** - set ECLK pins open drain enable */
systemREG1->SYSPC7 = 0U;
/** - set ECLK pins pullup/pulldown enable */
systemREG1->SYSPC8 = 0U;
/** - set ECLK pins pullup/pulldown select */
systemREG1->SYSPC9 = 1U;
/** - Setup ECLK */
systemREG1->ECPCNTL = (0U << 24U)
| (0U << 23U)
| ((8U - 1U) & 0xFFFFU);
/* USER CODE BEGIN (25) */
/* USER CODE END */
}
void systemPowerDown(uint32 mode)
{
/* USER CODE BEGIN (26) */
/* USER CODE END */
/* Disable clock sources */
systemREG1->CSDISSET = mode & 0x000000FFU;
/* Disable clock domains */
systemREG1->CDDIS = (mode >> 8U) & 0x00000FFFU;
/* Idle CPU */
/*SAFETYMCUSW 88 S MR:2.1 <REVIEWED> "Assembly in C needed" */
asm(" wfi");
/* USER CODE BEGIN (27) */
/* USER CODE END */
}
/* USER CODE BEGIN (28) */
/* USER CODE END */
/** @fn void systemGetConfigValue(system_config_reg_t *config_reg, config_value_type_t type)
* @brief Get the initial or current values of the configuration registers
*
* @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored
* @param[in] type: whether initial or current value of the configuration registers need to be stored
* - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
* - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*
* This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg
*
*/
void systemGetConfigValue(system_config_reg_t *config_reg, config_value_type_t type)
{
if (type == InitialValue)
{
config_reg->CONFIG_SYSPC1 = SYS_SYSPC1_CONFIGVALUE;
config_reg->CONFIG_SYSPC2 = SYS_SYSPC2_CONFIGVALUE;
config_reg->CONFIG_SYSPC7 = SYS_SYSPC7_CONFIGVALUE;
config_reg->CONFIG_SYSPC8 = SYS_SYSPC8_CONFIGVALUE;
config_reg->CONFIG_SYSPC9 = SYS_SYSPC9_CONFIGVALUE;
config_reg->CONFIG_CSDIS = SYS_CSDIS_CONFIGVALUE;
config_reg->CONFIG_CDDIS = SYS_CDDIS_CONFIGVALUE;
config_reg->CONFIG_GHVSRC = SYS_GHVSRC_CONFIGVALUE;
config_reg->CONFIG_VCLKASRC = SYS_VCLKASRC_CONFIGVALUE;
config_reg->CONFIG_RCLKSRC = SYS_RCLKSRC_CONFIGVALUE;
config_reg->CONFIG_MSTGCR = SYS_MSTGCR_CONFIGVALUE;
config_reg->CONFIG_MINITGCR = SYS_MINITGCR_CONFIGVALUE;
config_reg->CONFIG_MSINENA = SYS_MSINENA_CONFIGVALUE;
config_reg->CONFIG_PLLCTL1 = SYS_PLLCTL1_CONFIGVALUE_2;
config_reg->CONFIG_PLLCTL2 = SYS_PLLCTL2_CONFIGVALUE;
config_reg->CONFIG_UERFLAG = SYS_UERFLAG_CONFIGVALUE;
if(LPO_TRIM_VALUE != 0xFFFFU)
{
config_reg->CONFIG_LPOMONCTL = SYS_LPOMONCTL_CONFIGVALUE_1;
}
else
{
config_reg->CONFIG_LPOMONCTL = SYS_LPOMONCTL_CONFIGVALUE_2;
}
config_reg->CONFIG_CLKTEST = SYS_CLKTEST_CONFIGVALUE;
config_reg->CONFIG_DFTCTRLREG1 = SYS_DFTCTRLREG1_CONFIGVALUE;
config_reg->CONFIG_DFTCTRLREG2 = SYS_DFTCTRLREG2_CONFIGVALUE;
config_reg->CONFIG_GPREG1 = SYS_GPREG1_CONFIGVALUE;
config_reg->CONFIG_RAMGCR = SYS_RAMGCR_CONFIGVALUE;
config_reg->CONFIG_BMMCR1 = SYS_BMMCR1_CONFIGVALUE;
config_reg->CONFIG_MMUGCR = SYS_MMUGCR_CONFIGVALUE;
config_reg->CONFIG_CLKCNTL = SYS_CLKCNTL_CONFIGVALUE;
config_reg->CONFIG_ECPCNTL = SYS_ECPCNTL_CONFIGVALUE;
config_reg->CONFIG_DEVCR1 = SYS_DEVCR1_CONFIGVALUE;
config_reg->CONFIG_SYSECR = SYS_SYSECR_CONFIGVALUE;
config_reg->CONFIG_PLLCTL3 = SYS2_PLLCTL3_CONFIGVALUE_2;
config_reg->CONFIG_STCCLKDIV = SYS2_STCCLKDIV_CONFIGVALUE;
config_reg->CONFIG_CLK2CNTL = SYS2_CLK2CNTL_CONFIGVALUE;
config_reg->CONFIG_VCLKACON1 = SYS2_VCLKACON1_CONFIGVALUE;
config_reg->CONFIG_CLKSLIP = SYS2_CLKSLIP_CONFIGVALUE;
config_reg->CONFIG_EFC_CTLEN = SYS2_EFC_CTLEN_CONFIGVALUE;
}
else
{
config_reg->CONFIG_SYSPC1 = systemREG1->SYSPC1;
config_reg->CONFIG_SYSPC2 = systemREG1->SYSPC2;
config_reg->CONFIG_SYSPC7 = systemREG1->SYSPC7;
config_reg->CONFIG_SYSPC8 = systemREG1->SYSPC8;
config_reg->CONFIG_SYSPC9 = systemREG1->SYSPC9;
config_reg->CONFIG_CSDIS = systemREG1->CSDIS;
config_reg->CONFIG_CDDIS = systemREG1->CDDIS;
config_reg->CONFIG_GHVSRC = systemREG1->GHVSRC;
config_reg->CONFIG_VCLKASRC = systemREG1->VCLKASRC;
config_reg->CONFIG_RCLKSRC = systemREG1->RCLKSRC;
config_reg->CONFIG_MSTGCR = systemREG1->MSTGCR;
config_reg->CONFIG_MINITGCR = systemREG1->MINITGCR;
config_reg->CONFIG_MSINENA = systemREG1->MSINENA;
config_reg->CONFIG_PLLCTL1 = systemREG1->PLLCTL1;
config_reg->CONFIG_PLLCTL2 = systemREG1->PLLCTL2;
config_reg->CONFIG_UERFLAG = systemREG1->UERFLAG;
config_reg->CONFIG_LPOMONCTL = systemREG1->LPOMONCTL;
config_reg->CONFIG_CLKTEST = systemREG1->CLKTEST;
config_reg->CONFIG_DFTCTRLREG1 = systemREG1->DFTCTRLREG1;
config_reg->CONFIG_DFTCTRLREG2 = systemREG1->DFTCTRLREG2;
config_reg->CONFIG_GPREG1 = systemREG1->GPREG1;
config_reg->CONFIG_RAMGCR = systemREG1->RAMGCR;
config_reg->CONFIG_BMMCR1 = systemREG1->BMMCR1;
config_reg->CONFIG_MMUGCR = systemREG1->MMUGCR;
config_reg->CONFIG_CLKCNTL = systemREG1->CLKCNTL;
config_reg->CONFIG_ECPCNTL = systemREG1->ECPCNTL;
config_reg->CONFIG_DEVCR1 = systemREG1->DEVCR1;
config_reg->CONFIG_SYSECR = systemREG1->SYSECR;
config_reg->CONFIG_PLLCTL3 = systemREG2->PLLCTL3;
config_reg->CONFIG_STCCLKDIV = systemREG2->STCCLKDIV;
config_reg->CONFIG_CLK2CNTL = systemREG2->CLK2CNTL;
config_reg->CONFIG_VCLKACON1 = systemREG2->VCLKACON1;
config_reg->CONFIG_CLKSLIP = systemREG2->CLKSLIP;
config_reg->CONFIG_EFC_CTLEN = systemREG2->EFC_CTLEN;
}
}
/** @fn void tcmflashGetConfigValue(tcmflash_config_reg_t *config_reg, config_value_type_t type)
* @brief Get the initial or current values of the configuration registers
*
* @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored
* @param[in] type: whether initial or current value of the configuration registers need to be stored
* - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
* - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*
* This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg
*
*/
void tcmflashGetConfigValue(tcmflash_config_reg_t *config_reg, config_value_type_t type)
{
if (type == InitialValue)
{
config_reg-> CONFIG_FRDCNTL = TCMFLASH_FRDCNTL_CONFIGVALUE;
config_reg-> CONFIG_FEDACCTRL1 = TCMFLASH_FEDACCTRL1_CONFIGVALUE;
config_reg-> CONFIG_FEDACCTRL2 = TCMFLASH_FEDACCTRL2_CONFIGVALUE;
config_reg-> CONFIG_FEDACSDIS = TCMFLASH_FEDACSDIS_CONFIGVALUE;
config_reg-> CONFIG_FBPROT = TCMFLASH_FBPROT_CONFIGVALUE;
config_reg-> CONFIG_FBSE = TCMFLASH_FBSE_CONFIGVALUE;
config_reg-> CONFIG_FBAC = TCMFLASH_FBAC_CONFIGVALUE;
config_reg-> CONFIG_FBFALLBACK = TCMFLASH_FBFALLBACK_CONFIGVALUE;
config_reg-> CONFIG_FPAC1 = TCMFLASH_FPAC1_CONFIGVALUE;
config_reg-> CONFIG_FPAC2 = TCMFLASH_FPAC2_CONFIGVALUE;
config_reg-> CONFIG_FMAC = TCMFLASH_FMAC_CONFIGVALUE;
config_reg-> CONFIG_FLOCK = TCMFLASH_FLOCK_CONFIGVALUE;
config_reg-> CONFIG_FDIAGCTRL = TCMFLASH_FDIAGCTRL_CONFIGVALUE;
config_reg-> CONFIG_FEDACSDIS2 = TCMFLASH_FEDACSDIS2_CONFIGVALUE;
}
else
{
config_reg-> CONFIG_FRDCNTL = flashWREG->FRDCNTL;
config_reg-> CONFIG_FEDACCTRL1 = flashWREG->FEDACCTRL1;
config_reg-> CONFIG_FEDACCTRL2 = flashWREG->FEDACCTRL2;
config_reg-> CONFIG_FEDACSDIS = flashWREG->FEDACSDIS;
config_reg-> CONFIG_FBPROT = flashWREG->FBPROT;
config_reg-> CONFIG_FBSE = flashWREG->FBSE;
config_reg-> CONFIG_FBAC = flashWREG->FBAC;
config_reg-> CONFIG_FBFALLBACK = flashWREG->FBFALLBACK;
config_reg-> CONFIG_FPAC1 = flashWREG->FPAC1;
config_reg-> CONFIG_FPAC2 = flashWREG->FPAC2;
config_reg-> CONFIG_FMAC = flashWREG->FMAC;
config_reg-> CONFIG_FLOCK = flashWREG->FLOCK;
config_reg-> CONFIG_FDIAGCTRL = flashWREG->FDIAGCTRL;
config_reg-> CONFIG_FEDACSDIS2 = flashWREG->FEDACSDIS2;
}
}
/** @fn void sramGetConfigValue(sram_config_reg_t *config_reg, config_value_type_t type)
* @brief Get the initial or current values of the configuration registers
*
* @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored
* @param[in] type: whether initial or current value of the configuration registers need to be stored
* - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
* - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg
*
* This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg
*
*/
void sramGetConfigValue(sram_config_reg_t *config_reg, config_value_type_t type)
{
if (type == InitialValue)
{
config_reg->CONFIG_RAMCTRL[0U] = SRAM_RAMCTRL_CONFIGVALUE;
config_reg->CONFIG_RAMTHRESHOLD[0U] = SRAM_RAMTHRESHOLD_CONFIGVALUE;
config_reg->CONFIG_RAMINTCTRL[0U] = SRAM_RAMINTCTRL_CONFIGVALUE;
config_reg->CONFIG_RAMTEST[0U] = SRAM_RAMTEST_CONFIGVALUE;
config_reg->CONFIG_RAMADDRDECVECT[0U] = SRAM_RAMADDRDECVECT_CONFIGVALUE;
config_reg->CONFIG_RAMCTRL[1U] = SRAM_RAMCTRL_CONFIGVALUE;
config_reg->CONFIG_RAMTHRESHOLD[1U] = SRAM_RAMTHRESHOLD_CONFIGVALUE;
config_reg->CONFIG_RAMINTCTRL[1U] = SRAM_RAMINTCTRL_CONFIGVALUE;
config_reg->CONFIG_RAMTEST[1U] = SRAM_RAMTEST_CONFIGVALUE;
config_reg->CONFIG_RAMADDRDECVECT[1U] = SRAM_RAMADDRDECVECT_CONFIGVALUE;
}
else
{
config_reg->CONFIG_RAMCTRL[0U] = tcram1REG->RAMCTRL;
config_reg->CONFIG_RAMTHRESHOLD[0U] = tcram1REG->RAMTHRESHOLD;
config_reg->CONFIG_RAMINTCTRL[0U] = tcram1REG->RAMINTCTRL;
config_reg->CONFIG_RAMTEST[0U] = tcram1REG->RAMTEST;
config_reg->CONFIG_RAMADDRDECVECT[0U] = tcram1REG->RAMADDRDECVECT;
config_reg->CONFIG_RAMCTRL[1U] = tcram2REG->RAMCTRL;
config_reg->CONFIG_RAMTHRESHOLD[1U] = tcram2REG->RAMTHRESHOLD;
config_reg->CONFIG_RAMINTCTRL[1U] = tcram2REG->RAMINTCTRL;
config_reg->CONFIG_RAMTEST[1U] = tcram2REG->RAMTEST;
config_reg->CONFIG_RAMADDRDECVECT[1U] = tcram2REG->RAMADDRDECVECT;
}
}