rtt-f030/bsp/rm48x50/HALCoGen/include/crc.h

/** @file CRC.h
*   @brief CRC Driver Header File
*   @date 23.May.2013
*   @version 03.05.01
*   
*   This file contains:
*   - Definitions
*   - Types
*   - Interface Prototypes
*   .
*   which are relevant for the CRC driver.
*/

/* (c) Texas Instruments 2009-2013, All rights reserved. */

#ifndef __CRC_H__
#define __CRC_H__

#include "reg_crc.h"



/* USER CODE BEGIN (0) */
/* USER CODE END */

/* CRC General Definitions */

/** @def CRCLEVEL_ACTIVE
*   @brief Alias name for CRC error operation level active 
*/
#define CRCLEVEL_ACTIVE 0x00U


/** @def CRC_AUTO
*   @brief Alias name for CRC auto mode
*/
#define CRC_AUTO 0x00000001U


/** @def CRC_SEMI_CPU
*   @brief Alias name for semi cpu mode setting
*/
#define CRC_SEMI_CPU 0x00000002U


/** @def CRC_FULL_CPU
*   @brief Alias name for CRC cpu full mode
*/
#define CRC_FULL_CPU 0x00000003U


/** @def CRC_CH4_TO
*   @brief Alias name for channel1 time out interrupt flag
*/
#define CRC_CH4_TO 0x10000000U

/** @def CRC_CH4_UR
*   @brief Alias name for channel1 underrun interrupt flag
*/
#define CRC_CH4_UR 0x08000000U

/** @def CRC_CH4_OR
*   @brief Alias name for channel1 overrun interrupt flag
*/
#define CRC_CH4_OR 0x04000000U

/** @def CRC_CH4_FAIL
*   @brief Alias name for channel1 crc fail interrupt flag
*/
#define CRC_CH4_FAIL 0x02000000U

/** @def CRC_CH4_CC
*   @brief Alias name for channel1 compression complete interrupt flag
*/
#define CRC_CH4_CC 0x01000000U

/** @def CRC_CH3_TO
*   @brief Alias name for channel2 time out interrupt flag
*/
#define CRC_CH3_TO 0x00100000U

/** @def CRC_CH3_UR
*   @brief Alias name for channel2 underrun interrupt flag
*/
#define CRC_CH3_UR 0x00080000U

/** @def CRC_CH3_OR
*   @brief Alias name for channel2 overrun interrupt flag
*/
#define CRC_CH3_OR 0x00040000U

/** @def CRC_CH3_FAIL
*   @brief Alias name for channel2 crc fail interrupt flag
*/
#define CRC_CH3_FAIL 0x00020000U

/** @def CRC_CH3_CC
*   @brief Alias name for channel2 compression complete interrupt flag
*/
#define CRC_CH3_CC 0x00010000U

/** @def CRC_CH2_TO
*   @brief Alias name for channel3 time out interrupt flag
*/
#define CRC_CH2_TO 0x00001000U

/** @def CRC_CH2_UR
*   @brief Alias name for channel3 underrun interrupt flag
*/
#define CRC_CH2_UR 0x00000800U

/** @def CRC_CH2_OR
*   @brief Alias name for channel3 overrun interrupt flag  
*/
#define CRC_CH2_OR 0x00000400U

/** @def CRC_CH2_FAIL
*   @brief Alias name for channel3 crc fail interrupt flag 
*/
#define CRC_CH2_FAIL 0x00000200U

/** @def CRC_CH2_CC
*   @brief Alias name for channel3 compression complete interrupt flag  
*/
#define CRC_CH2_CC 0x00000100U

/** @def CRC_CH1_TO
*   @brief Alias name for channel4 time out interrupt flag 
*/
#define CRC_CH1_TO 0x00000010U

/** @def CRC_CH1_UR
*   @brief Alias name for channel4 underrun interrupt flag
*/
#define CRC_CH1_UR 0x00000008U


/** @def CRC_CH1_OR
*   @brief Alias name for channel4 overrun interrupt flag  
*/
#define CRC_CH1_OR 0x00000004U

/** @def CRC_CH1_FAIL
*   @brief Alias name for channel4 crc fail interrupt flag  
*/
#define CRC_CH1_FAIL 0x00000002U

/** @def CRC_CH1_CC
*   @brief Alias name for channel4 compression complete interrupt flag    
*/
#define CRC_CH1_CC 0x00000001U



/** @struct crcModConfig
*   @brief CRC mode specific parameters 
*
*   This type is used to pass crc mode specific parameters 
*/
/** @typedef crcModConfig_t
*   @brief CRC Data Type Definition
*/
typedef struct crcModConfig
{
    uint32 mode;     /**< Mode of operation        */
    uint32 crc_channel;     /**< CRC channel-0,1       */
    uint32 * src_data_pat;  /**< Pattern data */
    uint32 data_length;  /**< Pattern data length.Number of 64 bit size word*/
} crcModConfig_t;

/** @struct crcConfig
*   @brief CRC configuration for different modes
*
*   This type is used to pass crc configuration
*/
/** @typedef crcConfig_t
*   @brief CRC Data Type Definition
*/
typedef struct crcConfig
{
    uint32 crc_channel;     /**< CRC channel-0,1         */
    uint32 mode;     /**< Mode of operation        */
    uint32 pcount;     /**< Pattern count*/
    uint32 scount;     /**< Sector count  */
    uint32 wdg_preload;  /**< Watchdog period */
    uint32 block_preload;  /**< Block period*/

} crcConfig_t;

/* USER CODE BEGIN (1) */
/* USER CODE END */

/** 
 *  @defgroup CRC CRC
 *  @brief Cyclic Redundancy Check Controller Module.
 *  
 *  The CRC controller is a module that is used to perform CRC (Cyclic Redundancy Check) to verify the
 *  integrity of memory system. A signature representing the contents of the memory is obtained when the
 *  contents of the memory are read into CRC controller. The responsibility of CRC controller is to calculate
 *  the signature for a set of data and then compare the calculated signature value against a pre-determined
 *  good signature value. CRC controller supports two channels to perform CRC calculation on multiple
 *  memories in parallel and can be used on any memory system.
 *
 *	Related Files
 *   - reg_crc.h
 *   - crc.h
 *   - crc.c
 *  @addtogroup CRC
 *  @{
 */
 
/* CRC Interface Functions */
void crcInit(void);
void crcSendPowerDown(crcBASE_t *crc);
void crcSignGen(crcBASE_t *crc,crcModConfig_t *param);
void crcSetConfig(crcBASE_t *crc,crcConfig_t *param);
uint64 crcGetSectorSig(crcBASE_t *crc,uint32 channel);
uint32 crcGetFailedSector(crcBASE_t *crc,uint32 channel);
uint32 crcGetIntrPend(crcBASE_t *crc,uint32 channel);
void crcChannelReset(crcBASE_t *crc,uint32 channel);
void crcEnableNotification(crcBASE_t *crc, uint32 flags);
void crcDisableNotification(crcBASE_t *crc, uint32 flags);

/** @fn void crcNotification(crcBASE_t *crc, uint32 flags)
*   @brief Interrupt callback
*   @param[in] crc   - crc module base address
*   @param[in] flags - copy of error interrupt flags
*
* This is a callback that is provided by the application and is called upon
* an interrupt.  The parameter passed to the callback is a copy of the 
* interrupt flag register.
*/
void crcNotification(crcBASE_t *crc, uint32 flags);


/**@}*/
/* USER CODE BEGIN (2) */
/* USER CODE END */

#endif