chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/gkipc/libraries/drv/710XS/gh/inc/gh_uart1.h

1496 lines
54 KiB
C
Raw Normal View History

add gokemicro gkipc bsp
2018-03-04 08:21:19 +08:00
/*!
*******************************************************************************
**
** \file gh_uart1.h
**
** \brief UART1.
**
** Copyright: 2012 - 2013 (C) GoKe Microelectronics ShangHai Branch
**
** \attention THIS SAMPLE CODE IS PROVIDED AS IS. GOKE MICROELECTRONICS
** ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
** OMMISSIONS.
**
** \note Do not modify this file as it is generated automatically.
**
******************************************************************************/
#ifndef _GH_UART1_H
#define _GH_UART1_H
#ifdef __LINUX__
#include "reg4linux.h"
#else
#define FIO_ADDRESS(block,address) (address)
#define FIO_MOFFSET(block,moffset) (moffset)
#endif
#ifndef __LINUX__
#include "gtypes.h" /* global type definitions */
#include "gh_lib_cfg.h" /* configuration */
#endif
#define GH_UART1_ENABLE_DEBUG_PRINT 0
#ifdef __LINUX__
#define GH_UART1_DEBUG_PRINT_FUNCTION printk
#else
#define GH_UART1_DEBUG_PRINT_FUNCTION printf
#endif
#ifndef __LINUX__
#if GH_UART1_ENABLE_DEBUG_PRINT
#include <stdio.h>
#endif
#endif
/* check configuration */
#ifndef GH_INLINE_LEVEL
#error "GH_INLINE_LEVEL is not defined!"
#endif
#if GH_INLINE_LEVEL > 2
#error "GH_INLINE_LEVEL must be set 0, 1 or 2!"
#endif
#ifndef GH_INLINE
#error "GH_INLINE is not defined!"
#endif
/* disable inlining for debugging */
#ifdef DEBUG
#undef GH_INLINE_LEVEL
#define GH_INLINE_LEVEL 0
#endif
/*----------------------------------------------------------------------------*/
/* registers */
/*----------------------------------------------------------------------------*/
#define REG_UART1_RBR FIO_ADDRESS(UART1,0xA001F000) /* read */
#define REG_UART1_THR FIO_ADDRESS(UART1,0xA001F000) /* write */
#define REG_UART1_DLL FIO_ADDRESS(UART1,0xA001F000) /* read/write */
#define REG_UART1_IER FIO_ADDRESS(UART1,0xA001F004) /* read/write */
#define REG_UART1_DLH FIO_ADDRESS(UART1,0xA001F004) /* read/write */
#define REG_UART1_IIR FIO_ADDRESS(UART1,0xA001F008) /* read */
#define REG_UART1_FCR FIO_ADDRESS(UART1,0xA001F008) /* write */
#define REG_UART1_LCR FIO_ADDRESS(UART1,0xA001F00C) /* read/write */
#define REG_UART1_MCR FIO_ADDRESS(UART1,0xA001F010) /* read/write */
#define REG_UART1_LSR FIO_ADDRESS(UART1,0xA001F014) /* read */
#define REG_UART1_MSR FIO_ADDRESS(UART1,0xA001F018) /* read */
#define REG_UART1_SCR FIO_ADDRESS(UART1,0xA001F01C) /* read/write */
/*----------------------------------------------------------------------------*/
/* bit group structures */
/*----------------------------------------------------------------------------*/
typedef union { /* UART1_RBR */
U32 all;
struct {
U32 data : 8;
U32 : 24;
} bitc;
} GH_UART1_RBR_S;
typedef union { /* UART1_THR */
U32 all;
struct {
U32 data : 8;
U32 : 24;
} bitc;
} GH_UART1_THR_S;
typedef union { /* UART1_DLL */
U32 all;
struct {
U32 bauddivint_l : 8;
U32 : 24;
} bitc;
} GH_UART1_DLL_S;
typedef union { /* UART1_IER */
U32 all;
struct {
U32 erbfi : 1;
U32 etbei : 1;
U32 elsi : 1;
U32 edssi : 1;
U32 : 28;
} bitc;
} GH_UART1_IER_S;
typedef union { /* UART1_DLH */
U32 all;
struct {
U32 bauddivint_h : 8;
U32 : 24;
} bitc;
} GH_UART1_DLH_S;
typedef union { /* UART1_IIR */
U32 all;
struct {
U32 interrupt_id : 4;
U32 : 2;
U32 fifos_enabled : 2;
U32 : 24;
} bitc;
} GH_UART1_IIR_S;
typedef union { /* UART1_FCR */
U32 all;
struct {
U32 fifo_enable : 1;
U32 rcvr_fifo_reset : 1;
U32 xmit_fifo_reset : 1;
U32 dma_mode : 1;
U32 tx_empty_trigger : 2;
U32 rcvr_trigger : 2;
U32 : 24;
} bitc;
} GH_UART1_FCR_S;
typedef union { /* UART1_LCR */
U32 all;
struct {
U32 cls : 2;
U32 stop : 1;
U32 pen : 1;
U32 eps : 1;
U32 sticky_parity : 1;
U32 breaks : 1;
U32 dlab : 1;
U32 : 24;
} bitc;
} GH_UART1_LCR_S;
typedef union { /* UART1_MCR */
U32 all;
struct {
U32 dtr : 1;
U32 rts : 1;
U32 out1 : 1;
U32 out2 : 1;
U32 loopback : 1;
U32 afce : 1;
U32 sire : 1;
U32 : 25;
} bitc;
} GH_UART1_MCR_S;
typedef union { /* UART1_LSR */
U32 all;
struct {
U32 dr : 1;
U32 oe : 1;
U32 pe : 1;
U32 fe : 1;
U32 bi : 1;
U32 : 1;
U32 temt : 1;
U32 : 25;
} bitc;
} GH_UART1_LSR_S;
typedef union { /* UART1_MSR */
U32 all;
struct {
U32 dcts : 1;
U32 ddsr : 1;
U32 teri : 1;
U32 ddcd : 1;
U32 cts : 1;
U32 dsr : 1;
U32 ri : 1;
U32 dcd : 1;
U32 : 24;
} bitc;
} GH_UART1_MSR_S;
typedef union { /* UART1_SCR */
U32 all;
struct {
U32 scr : 8;
U32 : 24;
} bitc;
} GH_UART1_SCR_S;
/*----------------------------------------------------------------------------*/
/* mirror variables */
/*----------------------------------------------------------------------------*/
extern GH_UART1_THR_S m_uart1_thr;
extern GH_UART1_FCR_S m_uart1_fcr;
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------*/
/* register UART1_RBR (read) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Reads the register 'UART1_RBR'. */
U32 GH_UART1_get_RBR(void);
/*! \brief Reads the bit group 'Data' of register 'UART1_RBR'. */
U8 GH_UART1_get_RBR_Data(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE U32 GH_UART1_get_RBR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_RBR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_RBR] --> 0x%08x\n",
REG_UART1_RBR,value);
#endif
return value;
}
GH_INLINE U8 GH_UART1_get_RBR_Data(void)
{
GH_UART1_RBR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_RBR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_RBR_Data] --> 0x%08x\n",
REG_UART1_RBR,value);
#endif
return tmp_value.bitc.data;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_THR (write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL < 2
/*! \brief Writes the register 'UART1_THR'. */
void GH_UART1_set_THR(U32 data);
/*! \brief Reads the mirror variable of the register 'UART1_THR'. */
U32 GH_UART1_getm_THR(void);
/*! \brief Writes the bit group 'Data' of register 'UART1_THR'. */
void GH_UART1_set_THR_Data(U8 data);
/*! \brief Reads the bit group 'Data' from the mirror variable of register 'UART1_THR'. */
U8 GH_UART1_getm_THR_Data(void);
#else /* GH_INLINE_LEVEL < 2 */
GH_INLINE void GH_UART1_set_THR(U32 data)
{
m_uart1_thr.all = data;
*(volatile U32 *)REG_UART1_THR = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_THR] <-- 0x%08x\n",
REG_UART1_THR,data,data);
#endif
}
GH_INLINE U32 GH_UART1_getm_THR(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_THR] --> 0x%08x\n",
m_uart1_thr.all);
#endif
return m_uart1_thr.all;
}
GH_INLINE void GH_UART1_set_THR_Data(U8 data)
{
m_uart1_thr.bitc.data = data;
*(volatile U32 *)REG_UART1_THR = m_uart1_thr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_THR_Data] <-- 0x%08x\n",
REG_UART1_THR,m_uart1_thr.all,m_uart1_thr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_THR_Data(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_THR_Data] --> 0x%08x\n",
m_uart1_thr.bitc.data);
#endif
return m_uart1_thr.bitc.data;
}
#endif /* GH_INLINE_LEVEL < 2 */
/*----------------------------------------------------------------------------*/
/* register UART1_DLL (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_DLL'. */
void GH_UART1_set_DLL(U32 data);
/*! \brief Reads the register 'UART1_DLL'. */
U32 GH_UART1_get_DLL(void);
/*! \brief Writes the bit group 'BaudDivint_L' of register 'UART1_DLL'. */
void GH_UART1_set_DLL_BaudDivint_L(U8 data);
/*! \brief Reads the bit group 'BaudDivint_L' of register 'UART1_DLL'. */
U8 GH_UART1_get_DLL_BaudDivint_L(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_DLL(U32 data)
{
*(volatile U32 *)REG_UART1_DLL = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_DLL] <-- 0x%08x\n",
REG_UART1_DLL,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_DLL(void)
{
U32 value = (*(volatile U32 *)REG_UART1_DLL);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_DLL] --> 0x%08x\n",
REG_UART1_DLL,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_DLL_BaudDivint_L(U8 data)
{
GH_UART1_DLL_S d;
d.all = *(volatile U32 *)REG_UART1_DLL;
d.bitc.bauddivint_l = data;
*(volatile U32 *)REG_UART1_DLL = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_DLL_BaudDivint_L] <-- 0x%08x\n",
REG_UART1_DLL,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_DLL_BaudDivint_L(void)
{
GH_UART1_DLL_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_DLL);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_DLL_BaudDivint_L] --> 0x%08x\n",
REG_UART1_DLL,value);
#endif
return tmp_value.bitc.bauddivint_l;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_IER (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_IER'. */
void GH_UART1_set_IER(U32 data);
/*! \brief Reads the register 'UART1_IER'. */
U32 GH_UART1_get_IER(void);
/*! \brief Writes the bit group 'erbfi' of register 'UART1_IER'. */
void GH_UART1_set_IER_erbfi(U8 data);
/*! \brief Reads the bit group 'erbfi' of register 'UART1_IER'. */
U8 GH_UART1_get_IER_erbfi(void);
/*! \brief Writes the bit group 'etbei' of register 'UART1_IER'. */
void GH_UART1_set_IER_etbei(U8 data);
/*! \brief Reads the bit group 'etbei' of register 'UART1_IER'. */
U8 GH_UART1_get_IER_etbei(void);
/*! \brief Writes the bit group 'elsi' of register 'UART1_IER'. */
void GH_UART1_set_IER_elsi(U8 data);
/*! \brief Reads the bit group 'elsi' of register 'UART1_IER'. */
U8 GH_UART1_get_IER_elsi(void);
/*! \brief Writes the bit group 'edssi' of register 'UART1_IER'. */
void GH_UART1_set_IER_edssi(U8 data);
/*! \brief Reads the bit group 'edssi' of register 'UART1_IER'. */
U8 GH_UART1_get_IER_edssi(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_IER(U32 data)
{
*(volatile U32 *)REG_UART1_IER = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_IER] <-- 0x%08x\n",
REG_UART1_IER,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_IER(void)
{
U32 value = (*(volatile U32 *)REG_UART1_IER);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IER] --> 0x%08x\n",
REG_UART1_IER,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_IER_erbfi(U8 data)
{
GH_UART1_IER_S d;
d.all = *(volatile U32 *)REG_UART1_IER;
d.bitc.erbfi = data;
*(volatile U32 *)REG_UART1_IER = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_IER_erbfi] <-- 0x%08x\n",
REG_UART1_IER,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_IER_erbfi(void)
{
GH_UART1_IER_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IER);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IER_erbfi] --> 0x%08x\n",
REG_UART1_IER,value);
#endif
return tmp_value.bitc.erbfi;
}
GH_INLINE void GH_UART1_set_IER_etbei(U8 data)
{
GH_UART1_IER_S d;
d.all = *(volatile U32 *)REG_UART1_IER;
d.bitc.etbei = data;
*(volatile U32 *)REG_UART1_IER = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_IER_etbei] <-- 0x%08x\n",
REG_UART1_IER,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_IER_etbei(void)
{
GH_UART1_IER_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IER);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IER_etbei] --> 0x%08x\n",
REG_UART1_IER,value);
#endif
return tmp_value.bitc.etbei;
}
GH_INLINE void GH_UART1_set_IER_elsi(U8 data)
{
GH_UART1_IER_S d;
d.all = *(volatile U32 *)REG_UART1_IER;
d.bitc.elsi = data;
*(volatile U32 *)REG_UART1_IER = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_IER_elsi] <-- 0x%08x\n",
REG_UART1_IER,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_IER_elsi(void)
{
GH_UART1_IER_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IER);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IER_elsi] --> 0x%08x\n",
REG_UART1_IER,value);
#endif
return tmp_value.bitc.elsi;
}
GH_INLINE void GH_UART1_set_IER_edssi(U8 data)
{
GH_UART1_IER_S d;
d.all = *(volatile U32 *)REG_UART1_IER;
d.bitc.edssi = data;
*(volatile U32 *)REG_UART1_IER = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_IER_edssi] <-- 0x%08x\n",
REG_UART1_IER,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_IER_edssi(void)
{
GH_UART1_IER_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IER);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IER_edssi] --> 0x%08x\n",
REG_UART1_IER,value);
#endif
return tmp_value.bitc.edssi;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_DLH (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_DLH'. */
void GH_UART1_set_DLH(U32 data);
/*! \brief Reads the register 'UART1_DLH'. */
U32 GH_UART1_get_DLH(void);
/*! \brief Writes the bit group 'BaudDivint_H' of register 'UART1_DLH'. */
void GH_UART1_set_DLH_BaudDivint_H(U8 data);
/*! \brief Reads the bit group 'BaudDivint_H' of register 'UART1_DLH'. */
U8 GH_UART1_get_DLH_BaudDivint_H(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_DLH(U32 data)
{
*(volatile U32 *)REG_UART1_DLH = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_DLH] <-- 0x%08x\n",
REG_UART1_DLH,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_DLH(void)
{
U32 value = (*(volatile U32 *)REG_UART1_DLH);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_DLH] --> 0x%08x\n",
REG_UART1_DLH,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_DLH_BaudDivint_H(U8 data)
{
GH_UART1_DLH_S d;
d.all = *(volatile U32 *)REG_UART1_DLH;
d.bitc.bauddivint_h = data;
*(volatile U32 *)REG_UART1_DLH = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_DLH_BaudDivint_H] <-- 0x%08x\n",
REG_UART1_DLH,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_DLH_BaudDivint_H(void)
{
GH_UART1_DLH_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_DLH);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_DLH_BaudDivint_H] --> 0x%08x\n",
REG_UART1_DLH,value);
#endif
return tmp_value.bitc.bauddivint_h;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_IIR (read) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Reads the register 'UART1_IIR'. */
U32 GH_UART1_get_IIR(void);
/*! \brief Reads the bit group 'interrupt_id' of register 'UART1_IIR'. */
U8 GH_UART1_get_IIR_interrupt_id(void);
/*! \brief Reads the bit group 'fifos_enabled' of register 'UART1_IIR'. */
U8 GH_UART1_get_IIR_fifos_enabled(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE U32 GH_UART1_get_IIR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_IIR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IIR] --> 0x%08x\n",
REG_UART1_IIR,value);
#endif
return value;
}
GH_INLINE U8 GH_UART1_get_IIR_interrupt_id(void)
{
GH_UART1_IIR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IIR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IIR_interrupt_id] --> 0x%08x\n",
REG_UART1_IIR,value);
#endif
return tmp_value.bitc.interrupt_id;
}
GH_INLINE U8 GH_UART1_get_IIR_fifos_enabled(void)
{
GH_UART1_IIR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_IIR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_IIR_fifos_enabled] --> 0x%08x\n",
REG_UART1_IIR,value);
#endif
return tmp_value.bitc.fifos_enabled;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_FCR (write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL < 2
/*! \brief Writes the register 'UART1_FCR'. */
void GH_UART1_set_FCR(U32 data);
/*! \brief Reads the mirror variable of the register 'UART1_FCR'. */
U32 GH_UART1_getm_FCR(void);
/*! \brief Writes the bit group 'FIFO_Enable' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_FIFO_Enable(U8 data);
/*! \brief Reads the bit group 'FIFO_Enable' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_FIFO_Enable(void);
/*! \brief Writes the bit group 'RCVR_FIFO_Reset' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_RCVR_FIFO_Reset(U8 data);
/*! \brief Reads the bit group 'RCVR_FIFO_Reset' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_RCVR_FIFO_Reset(void);
/*! \brief Writes the bit group 'XMIT_FIFO_Reset' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_XMIT_FIFO_Reset(U8 data);
/*! \brief Reads the bit group 'XMIT_FIFO_Reset' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_XMIT_FIFO_Reset(void);
/*! \brief Writes the bit group 'DMA_Mode' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_DMA_Mode(U8 data);
/*! \brief Reads the bit group 'DMA_Mode' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_DMA_Mode(void);
/*! \brief Writes the bit group 'TX_Empty_Trigger' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_TX_Empty_Trigger(U8 data);
/*! \brief Reads the bit group 'TX_Empty_Trigger' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_TX_Empty_Trigger(void);
/*! \brief Writes the bit group 'RCVR_Trigger' of register 'UART1_FCR'. */
void GH_UART1_set_FCR_RCVR_Trigger(U8 data);
/*! \brief Reads the bit group 'RCVR_Trigger' from the mirror variable of register 'UART1_FCR'. */
U8 GH_UART1_getm_FCR_RCVR_Trigger(void);
#else /* GH_INLINE_LEVEL < 2 */
GH_INLINE void GH_UART1_set_FCR(U32 data)
{
m_uart1_fcr.all = data;
*(volatile U32 *)REG_UART1_FCR = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR] <-- 0x%08x\n",
REG_UART1_FCR,data,data);
#endif
}
GH_INLINE U32 GH_UART1_getm_FCR(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR] --> 0x%08x\n",
m_uart1_fcr.all);
#endif
return m_uart1_fcr.all;
}
GH_INLINE void GH_UART1_set_FCR_FIFO_Enable(U8 data)
{
m_uart1_fcr.bitc.fifo_enable = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_FIFO_Enable] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_FIFO_Enable(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_FIFO_Enable] --> 0x%08x\n",
m_uart1_fcr.bitc.fifo_enable);
#endif
return m_uart1_fcr.bitc.fifo_enable;
}
GH_INLINE void GH_UART1_set_FCR_RCVR_FIFO_Reset(U8 data)
{
m_uart1_fcr.bitc.rcvr_fifo_reset = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_RCVR_FIFO_Reset] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_RCVR_FIFO_Reset(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_RCVR_FIFO_Reset] --> 0x%08x\n",
m_uart1_fcr.bitc.rcvr_fifo_reset);
#endif
return m_uart1_fcr.bitc.rcvr_fifo_reset;
}
GH_INLINE void GH_UART1_set_FCR_XMIT_FIFO_Reset(U8 data)
{
m_uart1_fcr.bitc.xmit_fifo_reset = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_XMIT_FIFO_Reset] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_XMIT_FIFO_Reset(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_XMIT_FIFO_Reset] --> 0x%08x\n",
m_uart1_fcr.bitc.xmit_fifo_reset);
#endif
return m_uart1_fcr.bitc.xmit_fifo_reset;
}
GH_INLINE void GH_UART1_set_FCR_DMA_Mode(U8 data)
{
m_uart1_fcr.bitc.dma_mode = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_DMA_Mode] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_DMA_Mode(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_DMA_Mode] --> 0x%08x\n",
m_uart1_fcr.bitc.dma_mode);
#endif
return m_uart1_fcr.bitc.dma_mode;
}
GH_INLINE void GH_UART1_set_FCR_TX_Empty_Trigger(U8 data)
{
m_uart1_fcr.bitc.tx_empty_trigger = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_TX_Empty_Trigger] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_TX_Empty_Trigger(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_TX_Empty_Trigger] --> 0x%08x\n",
m_uart1_fcr.bitc.tx_empty_trigger);
#endif
return m_uart1_fcr.bitc.tx_empty_trigger;
}
GH_INLINE void GH_UART1_set_FCR_RCVR_Trigger(U8 data)
{
m_uart1_fcr.bitc.rcvr_trigger = data;
*(volatile U32 *)REG_UART1_FCR = m_uart1_fcr.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_FCR_RCVR_Trigger] <-- 0x%08x\n",
REG_UART1_FCR,m_uart1_fcr.all,m_uart1_fcr.all);
#endif
}
GH_INLINE U8 GH_UART1_getm_FCR_RCVR_Trigger(void)
{
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "[GH_UART1_getm_FCR_RCVR_Trigger] --> 0x%08x\n",
m_uart1_fcr.bitc.rcvr_trigger);
#endif
return m_uart1_fcr.bitc.rcvr_trigger;
}
#endif /* GH_INLINE_LEVEL < 2 */
/*----------------------------------------------------------------------------*/
/* register UART1_LCR (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_LCR'. */
void GH_UART1_set_LCR(U32 data);
/*! \brief Reads the register 'UART1_LCR'. */
U32 GH_UART1_get_LCR(void);
/*! \brief Writes the bit group 'cls' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_cls(U8 data);
/*! \brief Reads the bit group 'cls' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_cls(void);
/*! \brief Writes the bit group 'stop' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_stop(U8 data);
/*! \brief Reads the bit group 'stop' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_stop(void);
/*! \brief Writes the bit group 'pen' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_pen(U8 data);
/*! \brief Reads the bit group 'pen' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_pen(void);
/*! \brief Writes the bit group 'eps' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_eps(U8 data);
/*! \brief Reads the bit group 'eps' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_eps(void);
/*! \brief Writes the bit group 'sticky_parity' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_sticky_parity(U8 data);
/*! \brief Reads the bit group 'sticky_parity' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_sticky_parity(void);
/*! \brief Writes the bit group 'breaks' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_breaks(U8 data);
/*! \brief Reads the bit group 'breaks' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_breaks(void);
/*! \brief Writes the bit group 'dlab' of register 'UART1_LCR'. */
void GH_UART1_set_LCR_dlab(U8 data);
/*! \brief Reads the bit group 'dlab' of register 'UART1_LCR'. */
U8 GH_UART1_get_LCR_dlab(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_LCR(U32 data)
{
*(volatile U32 *)REG_UART1_LCR = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR] <-- 0x%08x\n",
REG_UART1_LCR,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_LCR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_LCR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_LCR_cls(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.cls = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_cls] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_cls(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_cls] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.cls;
}
GH_INLINE void GH_UART1_set_LCR_stop(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.stop = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_stop] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_stop(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_stop] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.stop;
}
GH_INLINE void GH_UART1_set_LCR_pen(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.pen = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_pen] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_pen(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_pen] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.pen;
}
GH_INLINE void GH_UART1_set_LCR_eps(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.eps = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_eps] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_eps(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_eps] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.eps;
}
GH_INLINE void GH_UART1_set_LCR_sticky_parity(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.sticky_parity = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_sticky_parity] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_sticky_parity(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_sticky_parity] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.sticky_parity;
}
GH_INLINE void GH_UART1_set_LCR_breaks(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.breaks = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_breaks] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_breaks(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_breaks] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.breaks;
}
GH_INLINE void GH_UART1_set_LCR_dlab(U8 data)
{
GH_UART1_LCR_S d;
d.all = *(volatile U32 *)REG_UART1_LCR;
d.bitc.dlab = data;
*(volatile U32 *)REG_UART1_LCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_LCR_dlab] <-- 0x%08x\n",
REG_UART1_LCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_LCR_dlab(void)
{
GH_UART1_LCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LCR_dlab] --> 0x%08x\n",
REG_UART1_LCR,value);
#endif
return tmp_value.bitc.dlab;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_MCR (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_MCR'. */
void GH_UART1_set_MCR(U32 data);
/*! \brief Reads the register 'UART1_MCR'. */
U32 GH_UART1_get_MCR(void);
/*! \brief Writes the bit group 'dtr' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_dtr(U8 data);
/*! \brief Reads the bit group 'dtr' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_dtr(void);
/*! \brief Writes the bit group 'rts' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_rts(U8 data);
/*! \brief Reads the bit group 'rts' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_rts(void);
/*! \brief Writes the bit group 'out1' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_out1(U8 data);
/*! \brief Reads the bit group 'out1' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_out1(void);
/*! \brief Writes the bit group 'out2' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_out2(U8 data);
/*! \brief Reads the bit group 'out2' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_out2(void);
/*! \brief Writes the bit group 'loopback' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_loopback(U8 data);
/*! \brief Reads the bit group 'loopback' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_loopback(void);
/*! \brief Writes the bit group 'afce' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_afce(U8 data);
/*! \brief Reads the bit group 'afce' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_afce(void);
/*! \brief Writes the bit group 'sire' of register 'UART1_MCR'. */
void GH_UART1_set_MCR_sire(U8 data);
/*! \brief Reads the bit group 'sire' of register 'UART1_MCR'. */
U8 GH_UART1_get_MCR_sire(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_MCR(U32 data)
{
*(volatile U32 *)REG_UART1_MCR = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR] <-- 0x%08x\n",
REG_UART1_MCR,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_MCR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_MCR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_MCR_dtr(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.dtr = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_dtr] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_dtr(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_dtr] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.dtr;
}
GH_INLINE void GH_UART1_set_MCR_rts(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.rts = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_rts] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_rts(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_rts] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.rts;
}
GH_INLINE void GH_UART1_set_MCR_out1(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.out1 = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_out1] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_out1(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_out1] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.out1;
}
GH_INLINE void GH_UART1_set_MCR_out2(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.out2 = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_out2] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_out2(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_out2] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.out2;
}
GH_INLINE void GH_UART1_set_MCR_loopback(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.loopback = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_loopback] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_loopback(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_loopback] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.loopback;
}
GH_INLINE void GH_UART1_set_MCR_afce(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.afce = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_afce] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_afce(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_afce] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.afce;
}
GH_INLINE void GH_UART1_set_MCR_sire(U8 data)
{
GH_UART1_MCR_S d;
d.all = *(volatile U32 *)REG_UART1_MCR;
d.bitc.sire = data;
*(volatile U32 *)REG_UART1_MCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_MCR_sire] <-- 0x%08x\n",
REG_UART1_MCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_MCR_sire(void)
{
GH_UART1_MCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MCR_sire] --> 0x%08x\n",
REG_UART1_MCR,value);
#endif
return tmp_value.bitc.sire;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_LSR (read) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Reads the register 'UART1_LSR'. */
U32 GH_UART1_get_LSR(void);
/*! \brief Reads the bit group 'dr' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_dr(void);
/*! \brief Reads the bit group 'oe' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_oe(void);
/*! \brief Reads the bit group 'pe' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_pe(void);
/*! \brief Reads the bit group 'fe' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_fe(void);
/*! \brief Reads the bit group 'bi' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_bi(void);
/*! \brief Reads the bit group 'temt' of register 'UART1_LSR'. */
U8 GH_UART1_get_LSR_temt(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE U32 GH_UART1_get_LSR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_LSR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return value;
}
GH_INLINE U8 GH_UART1_get_LSR_dr(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_dr] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.dr;
}
GH_INLINE U8 GH_UART1_get_LSR_oe(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_oe] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.oe;
}
GH_INLINE U8 GH_UART1_get_LSR_pe(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_pe] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.pe;
}
GH_INLINE U8 GH_UART1_get_LSR_fe(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_fe] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.fe;
}
GH_INLINE U8 GH_UART1_get_LSR_bi(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_bi] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.bi;
}
GH_INLINE U8 GH_UART1_get_LSR_temt(void)
{
GH_UART1_LSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_LSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_LSR_temt] --> 0x%08x\n",
REG_UART1_LSR,value);
#endif
return tmp_value.bitc.temt;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_MSR (read) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Reads the register 'UART1_MSR'. */
U32 GH_UART1_get_MSR(void);
/*! \brief Reads the bit group 'dcts' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_dcts(void);
/*! \brief Reads the bit group 'ddsr' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_ddsr(void);
/*! \brief Reads the bit group 'teri' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_teri(void);
/*! \brief Reads the bit group 'ddcd' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_ddcd(void);
/*! \brief Reads the bit group 'cts' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_cts(void);
/*! \brief Reads the bit group 'dsr' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_dsr(void);
/*! \brief Reads the bit group 'ri' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_ri(void);
/*! \brief Reads the bit group 'dcd' of register 'UART1_MSR'. */
U8 GH_UART1_get_MSR_dcd(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE U32 GH_UART1_get_MSR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_MSR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return value;
}
GH_INLINE U8 GH_UART1_get_MSR_dcts(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_dcts] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.dcts;
}
GH_INLINE U8 GH_UART1_get_MSR_ddsr(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_ddsr] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.ddsr;
}
GH_INLINE U8 GH_UART1_get_MSR_teri(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_teri] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.teri;
}
GH_INLINE U8 GH_UART1_get_MSR_ddcd(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_ddcd] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.ddcd;
}
GH_INLINE U8 GH_UART1_get_MSR_cts(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_cts] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.cts;
}
GH_INLINE U8 GH_UART1_get_MSR_dsr(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_dsr] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.dsr;
}
GH_INLINE U8 GH_UART1_get_MSR_ri(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_ri] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.ri;
}
GH_INLINE U8 GH_UART1_get_MSR_dcd(void)
{
GH_UART1_MSR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_MSR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_MSR_dcd] --> 0x%08x\n",
REG_UART1_MSR,value);
#endif
return tmp_value.bitc.dcd;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* register UART1_SCR (read/write) */
/*----------------------------------------------------------------------------*/
#if GH_INLINE_LEVEL == 0
/*! \brief Writes the register 'UART1_SCR'. */
void GH_UART1_set_SCR(U32 data);
/*! \brief Reads the register 'UART1_SCR'. */
U32 GH_UART1_get_SCR(void);
/*! \brief Writes the bit group 'scr' of register 'UART1_SCR'. */
void GH_UART1_set_SCR_scr(U8 data);
/*! \brief Reads the bit group 'scr' of register 'UART1_SCR'. */
U8 GH_UART1_get_SCR_scr(void);
#else /* GH_INLINE_LEVEL == 0 */
GH_INLINE void GH_UART1_set_SCR(U32 data)
{
*(volatile U32 *)REG_UART1_SCR = data;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_SCR] <-- 0x%08x\n",
REG_UART1_SCR,data,data);
#endif
}
GH_INLINE U32 GH_UART1_get_SCR(void)
{
U32 value = (*(volatile U32 *)REG_UART1_SCR);
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_SCR] --> 0x%08x\n",
REG_UART1_SCR,value);
#endif
return value;
}
GH_INLINE void GH_UART1_set_SCR_scr(U8 data)
{
GH_UART1_SCR_S d;
d.all = *(volatile U32 *)REG_UART1_SCR;
d.bitc.scr = data;
*(volatile U32 *)REG_UART1_SCR = d.all;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "WRREG(0x%08x,0x%08x); \\\\ [GH_UART1_set_SCR_scr] <-- 0x%08x\n",
REG_UART1_SCR,d.all,d.all);
#endif
}
GH_INLINE U8 GH_UART1_get_SCR_scr(void)
{
GH_UART1_SCR_S tmp_value;
U32 value = (*(volatile U32 *)REG_UART1_SCR);
tmp_value.all = value;
#if GH_UART1_ENABLE_DEBUG_PRINT
GH_UART1_DEBUG_PRINT_FUNCTION( "value = RDREG(0x%08x); \\\\ [GH_UART1_get_SCR_scr] --> 0x%08x\n",
REG_UART1_SCR,value);
#endif
return tmp_value.bitc.scr;
}
#endif /* GH_INLINE_LEVEL == 0 */
/*----------------------------------------------------------------------------*/
/* init function */
/*----------------------------------------------------------------------------*/
/*! \brief Initialises the registers and mirror variables. */
void GH_UART1_init(void);
#ifdef __cplusplus
}
#endif
#endif /* _GH_UART1_H */
/*----------------------------------------------------------------------------*/
/* end of file */
/*----------------------------------------------------------------------------*/