rtt-f030/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h

117 lines
3.5 KiB
C
Raw Normal View History

2014-08-30 00:19:16 +08:00
/**
*****************************************************************************
* @file cmem7_dma.h
*
* @brief CMEM7 DMA header file
*
*
* @version V1.0
* @date 3. September 2013
*
* @note
*
*****************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
*****************************************************************************
*/
#ifndef __CMEM7_DMA_H
#define __CMEM7_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
#include "cmem7.h"
#include "cmem7_conf.h"
/** @defgroup DMA_Int
* @{
*/
#define DMA_Int_TfrComplete 0x00000001
#define DMA_Int_Err 0x00000002
#define DMA_Int_All 0x00000003
#define IS_DMA_INT(INT) (((INT) != 0) && (((INT) & ~DMA_Int_All) == 0))
/**
* @}
*/
/**
* @brief Descriptor structure
* @note DMA requires users provides a list of descriptors to operation.
* Meanwhile, memory occupied by descriptors should be in physical
* memory and keep valid during DMA transfer.
*/
typedef struct {
uint32_t srcAddr; /*!< source address */
uint32_t dstAddr; /*!< destination address */
uint32_t number; /*!< block byte number, no more than 2K Bytes */
uint32_t nextBlock; /*!< next block descriptor */
uint32_t padding; /*!< Nonsense, only used to fill */
} BLOCK_DESC;
/**
* @brief DMA initialization
* @note This function should be called at first before any other interfaces.
* @param None
* @retval None
*/
void DMA_Init(void);
/**
* @brief Enable or disable DMA interrupt.
* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
* @param[in] Enable The bit indicates if specific interrupts are enable or not
* @retval None
*/
void DMA_EnableInt(uint32_t Int, BOOL enable);
/**
* @brief Check specific interrupts are set or not
* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
* @retval BOOL The bit indicates if specific interrupts are set or not
*/
BOOL DMA_GetIntStatus(uint32_t Int);
/**
* @brief Clear specific interrupts
* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
* @retval None
*/
void DMA_ClearInt(uint32_t Int);
/**
* @brief DMA transfer
* @note Make sure that memory occupied by descriptors should be in physical
* memory and keep valid before DMA transfer is finished (Return false by
* calling DMA_IsBusy after DMA transfer started).
* @param[in] blockList A pointer to header of list of BLOCK_DESC
* @retval BOOL The bit indicates if DMA begins to transfer
* @see DMA_IsBusy
*/
BOOL DMA_Transfer(BLOCK_DESC *blockList);
/**
* @brief DMA is busy or not
* @param None
* @retval BOOL The bit indicates if DMA is busy or not
*/
BOOL DMA_IsBusy(void);
#ifdef __cplusplus
}
#endif
#endif /* __CMEM7_DMA_H */