chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/lm3s/inc/hw_ethernet.h

684 lines
35 KiB
C
Raw Normal View History

import lm3s, lpc2148/lpc2478, x86/qemu, AT91SAM7S/7X, s3c44b0, STM32F103ZE bsp git-svn-id: https://rt-thread.googlecode.com/svn/trunk@6 bbd45198-f89e-11dd-88c7-29a3b14d5316
2009-07-03 07:30:53 +08:00
//*****************************************************************************
//
// hw_ethernet.h - Macros used when accessing the Ethernet hardware.
//
// Copyright (c) 2006-2009 Luminary Micro, Inc. All rights reserved.
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. You may not combine
// this software with "viral" open-source software in order to form a larger
// program. Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 4694 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_ETHERNET_H__
#define __HW_ETHERNET_H__
//*****************************************************************************
//
// The following are defines for the MAC register offsets in the Ethernet
// Controller.
//
//*****************************************************************************
#define MAC_O_RIS 0x00000000 // Ethernet MAC Raw Interrupt
// Status
#define MAC_O_IACK 0x00000000 // Interrupt Acknowledge Register
#define MAC_O_IM 0x00000004 // Interrupt Mask Register
#define MAC_O_RCTL 0x00000008 // Receive Control Register
#define MAC_O_TCTL 0x0000000C // Transmit Control Register
#define MAC_O_DATA 0x00000010 // Data Register
#define MAC_O_IA0 0x00000014 // Individual Address Register 0
#define MAC_O_IA1 0x00000018 // Individual Address Register 1
#define MAC_O_THR 0x0000001C // Threshold Register
#define MAC_O_MCTL 0x00000020 // Management Control Register
#define MAC_O_MDV 0x00000024 // Management Divider Register
#define MAC_O_MTXD 0x0000002C // Management Transmit Data Reg
#define MAC_O_MRXD 0x00000030 // Management Receive Data Reg
#define MAC_O_NP 0x00000034 // Number of Packets Register
#define MAC_O_TR 0x00000038 // Transmission Request Register
#define MAC_O_TS 0x0000003C // Timer Support Register
#define MAC_O_LED 0x00000040 // Ethernet MAC LED Encoding
#define MAC_O_MDIX 0x00000044 // MDIX Register
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_IACK register.
//
//*****************************************************************************
#define MAC_IACK_PHYINT 0x00000040 // Clear PHY Interrupt
#define MAC_IACK_MDINT 0x00000020 // Clear MDI Transaction Complete
#define MAC_IACK_RXER 0x00000010 // Clear RX Error
#define MAC_IACK_FOV 0x00000008 // Clear RX FIFO Overrun
#define MAC_IACK_TXEMP 0x00000004 // Clear TX FIFO Empy
#define MAC_IACK_TXER 0x00000002 // Clear TX Error
#define MAC_IACK_RXINT 0x00000001 // Clear RX Packet Available
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_IM register.
//
//*****************************************************************************
#define MAC_IM_PHYINTM 0x00000040 // Mask PHY Interrupt
#define MAC_IM_MDINTM 0x00000020 // Mask MDI Transaction Complete
#define MAC_IM_RXERM 0x00000010 // Mask RX Error
#define MAC_IM_FOVM 0x00000008 // Mask RX FIFO Overrun
#define MAC_IM_TXEMPM 0x00000004 // Mask TX FIFO Empy
#define MAC_IM_TXERM 0x00000002 // Mask TX Error
#define MAC_IM_RXINTM 0x00000001 // Mask RX Packet Available
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_RCTL register.
//
//*****************************************************************************
#define MAC_RCTL_RSTFIFO 0x00000010 // Clear the Receive FIFO
#define MAC_RCTL_BADCRC 0x00000008 // Reject Packets With Bad CRC
#define MAC_RCTL_PRMS 0x00000004 // Enable Promiscuous Mode
#define MAC_RCTL_AMUL 0x00000002 // Enable Multicast Packets
#define MAC_RCTL_RXEN 0x00000001 // Enable Ethernet Receiver
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_TCTL register.
//
//*****************************************************************************
#define MAC_TCTL_DUPLEX 0x00000010 // Enable Duplex mode
#define MAC_TCTL_CRC 0x00000004 // Enable CRC Generation
#define MAC_TCTL_PADEN 0x00000002 // Enable Automatic Padding
#define MAC_TCTL_TXEN 0x00000001 // Enable Ethernet Transmitter
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_IA0 register.
//
//*****************************************************************************
#define MAC_IA0_MACOCT4_M 0xFF000000 // MAC Address Octet 4.
#define MAC_IA0_MACOCT3_M 0x00FF0000 // MAC Address Octet 3.
#define MAC_IA0_MACOCT2_M 0x0000FF00 // MAC Address Octet 2.
#define MAC_IA0_MACOCT1_M 0x000000FF // MAC Address Octet 1.
#define MAC_IA0_MACOCT4_S 24
#define MAC_IA0_MACOCT3_S 16
#define MAC_IA0_MACOCT2_S 8
#define MAC_IA0_MACOCT1_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_IA1 register.
//
//*****************************************************************************
#define MAC_IA1_MACOCT6_M 0x0000FF00 // MAC Address Octet 6.
#define MAC_IA1_MACOCT5_M 0x000000FF // MAC Address Octet 5.
#define MAC_IA1_MACOCT6_S 8
#define MAC_IA1_MACOCT5_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_TXTH register.
//
//*****************************************************************************
#define MAC_THR_THRESH_M 0x0000003F // Threshold Value.
#define MAC_THR_THRESH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_MCTL register.
//
//*****************************************************************************
#define MAC_MCTL_REGADR_M 0x000000F8 // MII Register Address.
#define MAC_MCTL_WRITE 0x00000002 // Next MII Transaction is Write
#define MAC_MCTL_START 0x00000001 // Start MII Transaction
#define MAC_MCTL_REGADR_S 3
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_MDV register.
//
//*****************************************************************************
#define MAC_MDV_DIV_M 0x000000FF // Clock Divider.
#define MAC_MDV_DIV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_MTXD register.
//
//*****************************************************************************
#define MAC_MTXD_MDTX_M 0x0000FFFF // MII Register Transmit Data.
#define MAC_MTXD_MDTX_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_MRXD register.
//
//*****************************************************************************
#define MAC_MRXD_MDRX_M 0x0000FFFF // MII Register Receive Data.
#define MAC_MRXD_MDRX_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_NP register.
//
//*****************************************************************************
#define MAC_NP_NPR_M 0x0000003F // Number of Packets in Receive
// FIFO.
#define MAC_NP_NPR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_TXRQ register.
//
//*****************************************************************************
#define MAC_TR_NEWTX 0x00000001 // Start an Ethernet Transmission
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_TS register.
//
//*****************************************************************************
#define MAC_TS_TSEN 0x00000001 // Enable Timestamp Logic
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_MDIX register.
//
//*****************************************************************************
#define MAC_MDIX_EN 0x00000001 // MDI/MDI-X Enable.
//*****************************************************************************
//
// The following are defines for the Ethernet Controller PHY registers.
//
//*****************************************************************************
#define PHY_MR0 0x00000000 // Ethernet PHY Management Register
// 0 - Control
#define PHY_MR1 0x00000001 // Ethernet PHY Management Register
// 1 - Status
#define PHY_MR2 0x00000002 // Ethernet PHY Management Register
// 2 - PHY Identifier 1
#define PHY_MR3 0x00000003 // Ethernet PHY Management Register
// 3 - PHY Identifier 2
#define PHY_MR4 0x00000004 // Ethernet PHY Management Register
// 4 - Auto-Negotiation
// Advertisement
#define PHY_MR5 0x00000005 // Ethernet PHY Management Register
// 5 - Auto-Negotiation Link
// Partner Base Page Ability
#define PHY_MR6 0x00000006 // Ethernet PHY Management Register
// 6 - Auto-Negotiation Expansion
#define PHY_MR16 0x00000010 // Ethernet PHY Management Register
// 16 - Vendor-Specific
#define PHY_MR17 0x00000011 // Ethernet PHY Management Register
// 17 - Interrupt Control/Status
#define PHY_MR18 0x00000012 // Ethernet PHY Management Register
// 18 - Diagnostic
#define PHY_MR19 0x00000013 // Ethernet PHY Management Register
// 19 - Transceiver Control
#define PHY_MR23 0x00000017 // Ethernet PHY Management Register
// 23 - LED Configuration
#define PHY_MR24 0x00000018 // Ethernet PHY Management Register
// 24 -MDI/MDIX Control
#define PHY_MR27 0x0000001B // Ethernet PHY Management Register
// 27 -Special Control/Status
#define PHY_MR29 0x0000001D // Ethernet PHY Management Register
// 29 - Interrupt Status
#define PHY_MR30 0x0000001E // Ethernet PHY Management Register
// 30 - Interrupt Mask
#define PHY_MR31 0x0000001F // Ethernet PHY Management Register
// 31 - PHY Special Control/Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR0 register.
//
//*****************************************************************************
#define PHY_MR0_RESET 0x00008000 // Reset Registers.
#define PHY_MR0_LOOPBK 0x00004000 // Loopback Mode.
#define PHY_MR0_SPEEDSL 0x00002000 // Speed Select.
#define PHY_MR0_ANEGEN 0x00001000 // Auto-Negotiation Enable.
#define PHY_MR0_PWRDN 0x00000800 // Power Down.
#define PHY_MR0_ISO 0x00000400 // Isolate.
#define PHY_MR0_RANEG 0x00000200 // Restart Auto-Negotiation.
#define PHY_MR0_DUPLEX 0x00000100 // Set Duplex Mode.
#define PHY_MR0_COLT 0x00000080 // Collision Test.
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_RIS register.
//
//*****************************************************************************
#define MAC_RIS_PHYINT 0x00000040 // PHY Interrupt.
#define MAC_RIS_MDINT 0x00000020 // MII Transaction Complete.
#define MAC_RIS_RXER 0x00000010 // Receive Error.
#define MAC_RIS_FOV 0x00000008 // FIFO Overrrun.
#define MAC_RIS_TXEMP 0x00000004 // Transmit FIFO Empty.
#define MAC_RIS_TXER 0x00000002 // Transmit Error.
#define MAC_RIS_RXINT 0x00000001 // Packet Received.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR1 register.
//
//*****************************************************************************
#define PHY_MR1_100X_F 0x00004000 // 100BASE-TX Full-Duplex Mode.
#define PHY_MR1_100X_H 0x00002000 // 100BASE-TX Half-Duplex Mode.
#define PHY_MR1_10T_F 0x00001000 // 10BASE-T Full-Duplex Mode.
#define PHY_MR1_10T_H 0x00000800 // 10BASE-T Half-Duplex Mode.
#define PHY_MR1_MFPS 0x00000040 // Management Frames with Preamble
// Suppressed.
#define PHY_MR1_ANEGC 0x00000020 // Auto-Negotiation Complete.
#define PHY_MR1_RFAULT 0x00000010 // Remote Fault.
#define PHY_MR1_ANEGA 0x00000008 // Auto-Negotiation.
#define PHY_MR1_LINK 0x00000004 // Link Made.
#define PHY_MR1_JAB 0x00000002 // Jabber Condition.
#define PHY_MR1_EXTD 0x00000001 // Extended Capabilities.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR2 register.
//
//*****************************************************************************
#define PHY_MR2_OUI_M 0x0000FFFF // Organizationally Unique
// Identifier[21:6].
#define PHY_MR2_OUI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR3 register.
//
//*****************************************************************************
#define PHY_MR3_OUI_M 0x0000FC00 // Organizationally Unique
// Identifier[5:0].
#define PHY_MR3_MN_M 0x000003F0 // Model Number.
#define PHY_MR3_RN_M 0x0000000F // Revision Number.
#define PHY_MR3_OUI_S 10
#define PHY_MR3_MN_S 4
#define PHY_MR3_RN_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR4 register.
//
//*****************************************************************************
#define PHY_MR4_NP 0x00008000 // Next Page.
#define PHY_MR4_RF 0x00002000 // Remote Fault.
#define PHY_MR4_A3 0x00000100 // Technology Ability Field[3].
#define PHY_MR4_A2 0x00000080 // Technology Ability Field[2].
#define PHY_MR4_A1 0x00000040 // Technology Ability Field[1].
#define PHY_MR4_A0 0x00000020 // Technology Ability Field[0].
#define PHY_MR4_S_M 0x0000001F // Selector Field.
#define PHY_MR4_S_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR5 register.
//
//*****************************************************************************
#define PHY_MR5_NP 0x00008000 // Next Page.
#define PHY_MR5_ACK 0x00004000 // Acknowledge.
#define PHY_MR5_RF 0x00002000 // Remote Fault.
#define PHY_MR5_A_M 0x00001FE0 // Technology Ability Field.
#define PHY_MR5_S_M 0x0000001F // Selector Field.
#define PHY_MR5_S_8023 0x00000001 // IEEE Std 802.3
#define PHY_MR5_S_8029 0x00000002 // IEEE Std 802.9 ISLAN-16T
#define PHY_MR5_S_8025 0x00000003 // IEEE Std 802.5
#define PHY_MR5_S_1394 0x00000004 // IEEE Std 1394
#define PHY_MR5_A_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR6 register.
//
//*****************************************************************************
#define PHY_MR6_PDF 0x00000010 // Parallel Detection Fault.
#define PHY_MR6_LPNPA 0x00000008 // Link Partner is Next Page Able.
#define PHY_MR6_PRX 0x00000002 // New Page Received.
#define PHY_MR6_LPANEGA 0x00000001 // Link Partner is Auto-Negotiation
// Able.
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_DATA register.
//
//*****************************************************************************
#define MAC_DATA_TXDATA_M 0xFFFFFFFF // Transmit FIFO Data.
#define MAC_DATA_RXDATA_M 0xFFFFFFFF // Receive FIFO Data.
#define MAC_DATA_RXDATA_S 0
#define MAC_DATA_TXDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR16 register.
//
//*****************************************************************************
#define PHY_MR16_RPTR 0x00008000 // Repeater Mode.
#define PHY_MR16_INPOL 0x00004000 // Interrupt Polarity.
#define PHY_MR16_TXHIM 0x00001000 // Transmit High Impedance Mode.
#define PHY_MR16_SQEI 0x00000800 // SQE Inhibit Testing.
#define PHY_MR16_NL10 0x00000400 // Natural Loopback Mode.
#define PHY_MR16_SR_M 0x000003C0 // Silicon Revision Identifier.
#define PHY_MR16_APOL 0x00000020 // Auto-Polarity Disable.
#define PHY_MR16_RVSPOL 0x00000010 // Receive Data Polarity.
#define PHY_MR16_PCSBP 0x00000002 // PCS Bypass.
#define PHY_MR16_RXCC 0x00000001 // Receive Clock Control.
#define PHY_MR16_SR_S 6
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR17 register.
//
//*****************************************************************************
#define PHY_MR17_JABBER_IE 0x00008000 // Jabber Interrupt Enable.
#define PHY_MR17_FASTRIP 0x00004000 // 10-BASE-T Fast Mode Enable.
#define PHY_MR17_RXER_IE 0x00004000 // Receive Error Interrupt Enable.
#define PHY_MR17_EDPD 0x00002000 // Enable Energy Detect Power Down.
#define PHY_MR17_PRX_IE 0x00002000 // Page Received Interrupt Enable.
#define PHY_MR17_PDF_IE 0x00001000 // Parallel Detection Fault
// Interrupt Enable.
#define PHY_MR17_LSQE 0x00000800 // Low Squelch Enable.
#define PHY_MR17_LPACK_IE 0x00000800 // LP Acknowledge Interrupt Enable.
#define PHY_MR17_LSCHG_IE 0x00000400 // Link Status Change Interrupt
// Enable.
#define PHY_MR17_MDPB 0x00000400 // Management Data Preamble Bypass.
#define PHY_MR17_RFAULT_IE 0x00000200 // Remote Fault Interrupt Enable.
#define PHY_MR17_FLPBK 0x00000200 // Far Loopback Mode.
#define PHY_MR17_ANEGCOMP_IE 0x00000100 // Auto-Negotiation Complete
// Interrupt Enable.
#define PHY_MR17_FASTEST 0x00000100 // Auto-Negotiation Test Mode.
#define PHY_MR17_JABBER_INT 0x00000080 // Jabber Event Interrupt.
#define PHY_MR17_RXER_INT 0x00000040 // Receive Error Interrupt.
#define PHY_MR17_PRX_INT 0x00000020 // Page Receive Interrupt.
#define PHY_MR17_PDF_INT 0x00000010 // Parallel Detection Fault
// Interrupt.
#define PHY_MR17_REFCE 0x00000010 // Reference Clock Enable.
#define PHY_MR17_LPACK_INT 0x00000008 // LP Acknowledge Interrupt.
#define PHY_MR17_PADBP 0x00000008 // PHY Address Bypass.
#define PHY_MR17_LSCHG_INT 0x00000004 // Link Status Change Interrupt.
#define PHY_MR17_FGLS 0x00000004 // Force Good Link Status.
#define PHY_MR17_RFAULT_INT 0x00000002 // Remote Fault Interrupt.
#define PHY_MR17_ENON 0x00000002 // Energy On.
#define PHY_MR17_ANEGCOMP_INT 0x00000001 // Auto-Negotiation Complete
// Interrupt.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR18 register.
//
//*****************************************************************************
#define PHY_MR18_ANEGF 0x00001000 // Auto-Negotiation Failure.
#define PHY_MR18_DPLX 0x00000800 // Duplex Mode.
#define PHY_MR18_RATE 0x00000400 // Rate.
#define PHY_MR18_RXSD 0x00000200 // Receive Detection.
#define PHY_MR18_RX_LOCK 0x00000100 // Receive PLL Lock.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR19 register.
//
//*****************************************************************************
#define PHY_MR19_TXO_M 0x0000C000 // Transmit Amplitude Selection.
#define PHY_MR19_TXO_00DB 0x00000000 // Gain set for 0.0dB of insertion
// loss
#define PHY_MR19_TXO_04DB 0x00004000 // Gain set for 0.4dB of insertion
// loss
#define PHY_MR19_TXO_08DB 0x00008000 // Gain set for 0.8dB of insertion
// loss
#define PHY_MR19_TXO_12DB 0x0000C000 // Gain set for 1.2dB of insertion
// loss
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR23 register.
//
//*****************************************************************************
#define PHY_MR23_LED1_M 0x000000F0 // LED1 Source.
#define PHY_MR23_LED1_LINK 0x00000000 // Link OK
#define PHY_MR23_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1)
#define PHY_MR23_LED1_100 0x00000050 // 100BASE-TX mode
#define PHY_MR23_LED1_10 0x00000060 // 10BASE-T mode
#define PHY_MR23_LED1_DUPLEX 0x00000070 // Full-Duplex
#define PHY_MR23_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX
// Activity
#define PHY_MR23_LED0_M 0x0000000F // LED0 Source.
#define PHY_MR23_LED0_LINK 0x00000000 // Link OK (Default LED0)
#define PHY_MR23_LED0_RXTX 0x00000001 // RX or TX Activity
#define PHY_MR23_LED0_100 0x00000005 // 100BASE-TX mode
#define PHY_MR23_LED0_10 0x00000006 // 10BASE-T mode
#define PHY_MR23_LED0_DUPLEX 0x00000007 // Full-Duplex
#define PHY_MR23_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX
// Activity
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR24 register.
//
//*****************************************************************************
#define PHY_MR24_PD_MODE 0x00000080 // Parallel Detection Mode.
#define PHY_MR24_AUTO_SW 0x00000040 // Auto-Switching Enable.
#define PHY_MR24_MDIX 0x00000020 // Auto-Switching Configuration.
#define PHY_MR24_MDIX_CM 0x00000010 // Auto-Switching Complete.
#define PHY_MR24_MDIX_SD_M 0x0000000F // Auto-Switching Seed.
#define PHY_MR24_MDIX_SD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR27 register.
//
//*****************************************************************************
#define PHY_MR27_XPOL 0x00000010 // Polarity State of 10 BASE-T.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR29 register.
//
//*****************************************************************************
#define PHY_MR29_EONIS 0x00000080 // ENERGYON Interrupt.
#define PHY_MR29_ANCOMPIS 0x00000040 // Auto-Negotiation Complete
// Interrupt.
#define PHY_MR29_RFLTIS 0x00000020 // Remote Fault Interrupt.
#define PHY_MR29_LDIS 0x00000010 // Link Down Interrupt.
#define PHY_MR29_LPACKIS 0x00000008 // Auto-Negotiation LP Acknowledge.
#define PHY_MR29_PDFIS 0x00000004 // Parallel Detection Fault.
#define PHY_MR29_PRXIS 0x00000002 // Auto Negotiation Page Received.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR30 register.
//
//*****************************************************************************
#define PHY_MR30_EONIM 0x00000080 // ENERGYON Interrupt Enabled.
#define PHY_MR30_ANCOMPIM 0x00000040 // Auto-Negotiation Complete
// Interrupt Enabled.
#define PHY_MR30_RFLTIM 0x00000020 // Remote Fault Interrupt Enabled.
#define PHY_MR30_LDIM 0x00000010 // Link Down Interrupt Enabled.
#define PHY_MR30_LPACKIM 0x00000008 // Auto-Negotiation LP Acknowledge
// Enabled.
#define PHY_MR30_PDFIM 0x00000004 // Parallel Detection Fault
// Enabled.
#define PHY_MR30_PRXIM 0x00000002 // Auto Negotiation Page Received
// Enabled.
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR31 register.
//
//*****************************************************************************
#define PHY_MR31_BPRMG 0x00008000 // Bypass Remove Glitch.
#define PHY_MR31_AUTODONE 0x00001000 // Auto Negotiation Done.
#define PHY_MR31_EN4B5B 0x00000040 // Enable 4B5B Encoding/Decoding.
#define PHY_MR31_SPEED_M 0x0000001C // HCD Speed Value.
#define PHY_MR31_SCRDIS 0x00000001 // Scramble Disable.
#define PHY_MR31_SPEED_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_LED register.
//
//*****************************************************************************
#define MAC_LED_LED1_M 0x000000F0 // LED1 Source.
#define MAC_LED_LED1_LINK 0x00000000 // Link OK
#define MAC_LED_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1)
#define MAC_LED_LED1_100 0x00000050 // 100BASE-TX mode
#define MAC_LED_LED1_10 0x00000060 // 10BASE-T mode
#define MAC_LED_LED1_DUPLEX 0x00000070 // Full-Duplex
#define MAC_LED_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX
// Activity
#define MAC_LED_LED0_M 0x0000000F // LED0 Source.
#define MAC_LED_LED0_LINK 0x00000000 // Link OK (Default LED0)
#define MAC_LED_LED0_RXTX 0x00000001 // RX or TX Activity
#define MAC_LED_LED0_100 0x00000005 // 100BASE-TX mode
#define MAC_LED_LED0_10 0x00000006 // 10BASE-T mode
#define MAC_LED_LED0_DUPLEX 0x00000007 // Full-Duplex
#define MAC_LED_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX
// Activity
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the MAC register offsets in the
// Ethernet Controller.
//
//*****************************************************************************
#define MAC_O_IS 0x00000000 // Interrupt Status Register
#define MAC_O_MADD 0x00000028 // Management Address Register
//*****************************************************************************
//
// The following are deprecated defines for the reset values of the MAC
// registers.
//
//*****************************************************************************
#define MAC_RV_MDV 0x00000080
#define MAC_RV_IM 0x0000007F
#define MAC_RV_THR 0x0000003F
#define MAC_RV_RCTL 0x00000008
#define MAC_RV_IA0 0x00000000
#define MAC_RV_TCTL 0x00000000
#define MAC_RV_DATA 0x00000000
#define MAC_RV_MRXD 0x00000000
#define MAC_RV_TR 0x00000000
#define MAC_RV_IS 0x00000000
#define MAC_RV_NP 0x00000000
#define MAC_RV_MCTL 0x00000000
#define MAC_RV_MTXD 0x00000000
#define MAC_RV_IA1 0x00000000
#define MAC_RV_IACK 0x00000000
#define MAC_RV_MADD 0x00000000
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_IS
// register.
//
//*****************************************************************************
#define MAC_IS_PHYINT 0x00000040 // PHY Interrupt
#define MAC_IS_MDINT 0x00000020 // MDI Transaction Complete
#define MAC_IS_RXER 0x00000010 // RX Error
#define MAC_IS_FOV 0x00000008 // RX FIFO Overrun
#define MAC_IS_TXEMP 0x00000004 // TX FIFO Empy
#define MAC_IS_TXER 0x00000002 // TX Error
#define MAC_IS_RXINT 0x00000001 // RX Packet Available
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_IA0
// register.
//
//*****************************************************************************
#define MAC_IA0_MACOCT4 0xFF000000 // 4th Octet of MAC address
#define MAC_IA0_MACOCT3 0x00FF0000 // 3rd Octet of MAC address
#define MAC_IA0_MACOCT2 0x0000FF00 // 2nd Octet of MAC address
#define MAC_IA0_MACOCT1 0x000000FF // 1st Octet of MAC address
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_IA1
// register.
//
//*****************************************************************************
#define MAC_IA1_MACOCT6 0x0000FF00 // 6th Octet of MAC address
#define MAC_IA1_MACOCT5 0x000000FF // 5th Octet of MAC address
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_TXTH
// register.
//
//*****************************************************************************
#define MAC_THR_THRESH 0x0000003F // Transmit Threshold Value
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_MCTL
// register.
//
//*****************************************************************************
#define MAC_MCTL_REGADR 0x000000F8 // Address for Next MII Transaction
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_MDV
// register.
//
//*****************************************************************************
#define MAC_MDV_DIV 0x000000FF // Clock Divider for MDC for TX
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_MTXD
// register.
//
//*****************************************************************************
#define MAC_MTXD_MDTX 0x0000FFFF // Data for Next MII Transaction
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_MRXD
// register.
//
//*****************************************************************************
#define MAC_MRXD_MDRX 0x0000FFFF // Data Read from Last MII Trans.
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the MAC_NP
// register.
//
//*****************************************************************************
#define MAC_NP_NPR 0x0000003F // Number of RX Frames in FIFO
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the PHY_MR23
// register.
//
//*****************************************************************************
#define PHY_MR23_LED1_TX 0x00000020 // TX Activity
#define PHY_MR23_LED1_RX 0x00000030 // RX Activity
#define PHY_MR23_LED1_COL 0x00000040 // Collision
#define PHY_MR23_LED0_TX 0x00000002 // TX Activity
#define PHY_MR23_LED0_RX 0x00000003 // RX Activity
#define PHY_MR23_LED0_COL 0x00000004 // Collision
#endif
#endif // __HW_ETHERNET_H__