414 lines
9.9 KiB
C
414 lines
9.9 KiB
C
|
/*
|
||
|
|
* File : hw_uart.c
|
||
|
|
* This file is part of RT-Thread RTOS
|
||
|
|
* COPYRIGHT (C) 2017, RT-Thread Development Team
|
||
|
|
*
|
||
|
|
* The license and distribution terms for this file may be
|
||
|
|
* found in the file LICENSE in this distribution or at
|
||
|
|
* http://www.rt-thread.org/license/LICENSE
|
||
|
|
*
|
||
|
|
* Change Logs:
|
||
|
|
* Date Author Notes
|
||
|
|
* 2017-09-15 Haley the first version
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "am_mcu_apollo.h"
|
||
|
|
#include "hw_uart.h"
|
||
|
|
#include "board.h"
|
||
|
|
#include <rtdevice.h>
|
||
|
|
|
||
|
|
/* USART0 */
|
||
|
|
#define AM_UART0_INST 0
|
||
|
|
|
||
|
|
#define UART0_GPIO_RX 2
|
||
|
|
#define UART0_GPIO_CFG_RX AM_HAL_PIN_2_UART0RX
|
||
|
|
#define UART0_GPIO_TX 1
|
||
|
|
#define UART0_GPIO_CFG_TX AM_HAL_PIN_1_UART0TX
|
||
|
|
|
||
|
|
/* USART1 */
|
||
|
|
#define AM_UART1_INST 1
|
||
|
|
|
||
|
|
#define UART1_GPIO_RX 9
|
||
|
|
#define UART1_GPIO_CFG_RX AM_HAL_PIN_9_UART1RX
|
||
|
|
#define UART1_GPIO_TX 8
|
||
|
|
#define UART1_GPIO_CFG_TX AM_HAL_PIN_8_UART1TX
|
||
|
|
|
||
|
|
/* AM uart driver */
|
||
|
|
struct am_uart
|
||
|
|
{
|
||
|
|
uint32_t uart_device;
|
||
|
|
uint32_t uart_interrupt;
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART configuration settings
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
am_hal_uart_config_t g_sUartConfig =
|
||
|
|
{
|
||
|
|
.ui32BaudRate = 115200,
|
||
|
|
.ui32DataBits = AM_HAL_UART_DATA_BITS_8,
|
||
|
|
.bTwoStopBits = false,
|
||
|
|
.ui32Parity = AM_HAL_UART_PARITY_NONE,
|
||
|
|
.ui32FlowCtrl = AM_HAL_UART_FLOW_CTRL_NONE,
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable the UART
|
||
|
|
*
|
||
|
|
* @param Uart driver
|
||
|
|
*
|
||
|
|
* This function is Enable the UART
|
||
|
|
*
|
||
|
|
* @return None.
|
||
|
|
*/
|
||
|
|
static void rt_hw_uart_enable(struct am_uart* uart)
|
||
|
|
{
|
||
|
|
/* Enable the UART clock */
|
||
|
|
am_hal_uart_clock_enable(uart->uart_device);
|
||
|
|
|
||
|
|
/* Enable the UART */
|
||
|
|
am_hal_uart_enable(uart->uart_device);
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
/* Make sure the UART RX and TX pins are enabled */
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_TX, UART0_GPIO_CFG_TX);
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_RX, UART0_GPIO_CFG_RX | AM_HAL_GPIO_PULL12K);
|
||
|
|
#endif /* RT_USING_UART0 */
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
/* Make sure the UART RX and TX pins are enabled */
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_TX, UART1_GPIO_CFG_TX);
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_RX, UART1_GPIO_CFG_RX | AM_HAL_GPIO_PULL12K);
|
||
|
|
#endif /* RT_USING_UART1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disable the UART
|
||
|
|
*
|
||
|
|
* @param Uart driver
|
||
|
|
*
|
||
|
|
* This function is Disable the UART
|
||
|
|
*
|
||
|
|
* @return None.
|
||
|
|
*/
|
||
|
|
static void rt_hw_uart_disable(struct am_uart* uart)
|
||
|
|
{
|
||
|
|
/* Clear all interrupts before sleeping as having a pending UART interrupt burns power */
|
||
|
|
am_hal_uart_int_clear(uart->uart_device, 0xFFFFFFFF);
|
||
|
|
|
||
|
|
/* Disable the UART */
|
||
|
|
am_hal_uart_disable(uart->uart_device);
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
/* Disable the UART pins */
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_TX, AM_HAL_PIN_DISABLE);
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_RX, AM_HAL_PIN_DISABLE);
|
||
|
|
#endif /* RT_USING_UART0 */
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
/* Disable the UART pins */
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_TX, AM_HAL_PIN_DISABLE);
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_RX, AM_HAL_PIN_DISABLE);
|
||
|
|
#endif /* RT_USING_UART1 */
|
||
|
|
|
||
|
|
/* Disable the UART clock */
|
||
|
|
am_hal_uart_clock_disable(uart->uart_device);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART-based string print function.
|
||
|
|
*
|
||
|
|
* @param Send buff
|
||
|
|
*
|
||
|
|
* This function is used for printing a string via the UART, which for some
|
||
|
|
* MCU devices may be multi-module.
|
||
|
|
*
|
||
|
|
* @return None.
|
||
|
|
*/
|
||
|
|
void rt_hw_uart_send_string(char *pcString)
|
||
|
|
{
|
||
|
|
am_hal_uart_string_transmit_polled(AM_UART0_INST, pcString);
|
||
|
|
|
||
|
|
/* Wait until busy bit clears to make sure UART fully transmitted last byte */
|
||
|
|
while ( am_hal_uart_flags_get(AM_UART0_INST) & AM_HAL_UART_FR_BUSY );
|
||
|
|
}
|
||
|
|
|
||
|
|
static rt_err_t am_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
||
|
|
{
|
||
|
|
struct am_uart* uart;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
RT_ASSERT(cfg != RT_NULL);
|
||
|
|
|
||
|
|
uart = (struct am_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
RT_ASSERT(uart != RT_NULL);
|
||
|
|
|
||
|
|
/* Get the configure */
|
||
|
|
g_sUartConfig.ui32BaudRate = cfg->baud_rate;
|
||
|
|
g_sUartConfig.ui32DataBits = cfg->data_bits;
|
||
|
|
|
||
|
|
if (cfg->stop_bits == STOP_BITS_1)
|
||
|
|
g_sUartConfig.bTwoStopBits = false;
|
||
|
|
else if (cfg->stop_bits == STOP_BITS_2)
|
||
|
|
g_sUartConfig.bTwoStopBits = true;
|
||
|
|
|
||
|
|
g_sUartConfig.ui32Parity = cfg->parity;
|
||
|
|
g_sUartConfig.ui32FlowCtrl = AM_HAL_UART_PARITY_NONE;
|
||
|
|
|
||
|
|
/* Configure the UART */
|
||
|
|
am_hal_uart_config(uart->uart_device, &g_sUartConfig);
|
||
|
|
|
||
|
|
/* Enable the UART */
|
||
|
|
am_hal_uart_enable(uart->uart_device);
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
static rt_err_t am_control(struct rt_serial_device *serial, int cmd, void *arg)
|
||
|
|
{
|
||
|
|
struct am_uart* uart;
|
||
|
|
//rt_uint32_t ctrl_arg = (rt_uint32_t)(arg);
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
uart = (struct am_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
RT_ASSERT(uart != RT_NULL);
|
||
|
|
|
||
|
|
switch (cmd)
|
||
|
|
{
|
||
|
|
/* disable interrupt */
|
||
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
||
|
|
rt_hw_uart_disable(uart);
|
||
|
|
break;
|
||
|
|
/* enable interrupt */
|
||
|
|
case RT_DEVICE_CTRL_SET_INT:
|
||
|
|
rt_hw_uart_enable(uart);
|
||
|
|
break;
|
||
|
|
/* UART config */
|
||
|
|
case RT_DEVICE_CTRL_CONFIG :
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int am_putc(struct rt_serial_device *serial, char c)
|
||
|
|
{
|
||
|
|
struct am_uart* uart;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
uart = (struct am_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
RT_ASSERT(uart != RT_NULL);
|
||
|
|
|
||
|
|
am_hal_uart_char_transmit_polled(uart->uart_device, c);
|
||
|
|
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int am_getc(struct rt_serial_device *serial)
|
||
|
|
{
|
||
|
|
char c;
|
||
|
|
int ch;
|
||
|
|
struct am_uart* uart;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
uart = (struct am_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
RT_ASSERT(uart != RT_NULL);
|
||
|
|
|
||
|
|
ch = -1;
|
||
|
|
if (am_hal_uart_flags_get(uart->uart_device) & AM_HAL_UART_FR_RX_FULL)
|
||
|
|
{
|
||
|
|
am_hal_uart_char_receive_polled(uart->uart_device, &c);
|
||
|
|
ch = c & 0xff;
|
||
|
|
}
|
||
|
|
|
||
|
|
return ch;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Uart common interrupt process. This need add to uart ISR.
|
||
|
|
*
|
||
|
|
* @param serial serial device
|
||
|
|
*/
|
||
|
|
static void uart_isr(struct rt_serial_device *serial)
|
||
|
|
{
|
||
|
|
uint32_t status;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
struct am_uart *uart = (struct am_uart *) serial->parent.user_data;
|
||
|
|
|
||
|
|
RT_ASSERT(uart != RT_NULL);
|
||
|
|
|
||
|
|
/* Read the interrupt status */
|
||
|
|
status = am_hal_uart_int_status_get(uart->uart_device, false);
|
||
|
|
|
||
|
|
//rt_kprintf("status is %d\r\n", status);
|
||
|
|
|
||
|
|
/* Clear the UART interrupt */
|
||
|
|
am_hal_uart_int_clear(uart->uart_device, status);
|
||
|
|
|
||
|
|
if (status & (AM_HAL_UART_INT_RX_TMOUT))
|
||
|
|
{
|
||
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_TIMEOUT);
|
||
|
|
}
|
||
|
|
|
||
|
|
if (status & AM_HAL_UART_INT_RX)
|
||
|
|
{
|
||
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
||
|
|
}
|
||
|
|
|
||
|
|
if (status & AM_HAL_UART_INT_TX)
|
||
|
|
{
|
||
|
|
//rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct rt_uart_ops am_uart_ops =
|
||
|
|
{
|
||
|
|
am_configure,
|
||
|
|
am_control,
|
||
|
|
am_putc,
|
||
|
|
am_getc,
|
||
|
|
};
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
/* UART0 device driver structure */
|
||
|
|
struct am_uart uart0 =
|
||
|
|
{
|
||
|
|
AM_UART0_INST,
|
||
|
|
AM_HAL_INTERRUPT_UART0
|
||
|
|
};
|
||
|
|
static struct rt_serial_device serial0;
|
||
|
|
|
||
|
|
void am_uart0_isr(void)
|
||
|
|
{
|
||
|
|
/* enter interrupt */
|
||
|
|
rt_interrupt_enter();
|
||
|
|
|
||
|
|
uart_isr(&serial0);
|
||
|
|
|
||
|
|
/* leave interrupt */
|
||
|
|
rt_interrupt_leave();
|
||
|
|
}
|
||
|
|
#endif /* RT_USING_UART0 */
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
/* UART1 device driver structure */
|
||
|
|
struct am_uart uart1 =
|
||
|
|
{
|
||
|
|
AM_UART1_INST,
|
||
|
|
AM_HAL_INTERRUPT_UART1
|
||
|
|
};
|
||
|
|
static struct rt_serial_device serial1;
|
||
|
|
|
||
|
|
void am_uart1_isr(void)
|
||
|
|
{
|
||
|
|
/* enter interrupt */
|
||
|
|
rt_interrupt_enter();
|
||
|
|
|
||
|
|
uart_isr(&serial1);
|
||
|
|
|
||
|
|
/* leave interrupt */
|
||
|
|
rt_interrupt_leave();
|
||
|
|
}
|
||
|
|
#endif /* RT_USING_UART1 */
|
||
|
|
|
||
|
|
static void GPIO_Configuration(void)
|
||
|
|
{
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
/* Make sure the UART RX and TX pins are enabled */
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_TX, UART0_GPIO_CFG_TX);
|
||
|
|
am_hal_gpio_pin_config(UART0_GPIO_RX, UART0_GPIO_CFG_RX | AM_HAL_GPIO_PULL12K);
|
||
|
|
#endif /* RT_USING_UART0 */
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
/* Make sure the UART RX and TX pins are enabled */
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_TX, UART1_GPIO_CFG_TX);
|
||
|
|
am_hal_gpio_pin_config(UART1_GPIO_RX, UART1_GPIO_CFG_RX | AM_HAL_GPIO_PULL12K);
|
||
|
|
#endif /* RT_USING_UART1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
static void RCC_Configuration(struct am_uart* uart)
|
||
|
|
{
|
||
|
|
/* Power on the selected UART */
|
||
|
|
am_hal_uart_pwrctrl_enable(uart->uart_device);
|
||
|
|
|
||
|
|
/* Start the UART interface, apply the desired configuration settings */
|
||
|
|
am_hal_uart_clock_enable(uart->uart_device);
|
||
|
|
|
||
|
|
/* Disable the UART before configuring it */
|
||
|
|
am_hal_uart_disable(uart->uart_device);
|
||
|
|
|
||
|
|
/* Configure the UART */
|
||
|
|
am_hal_uart_config(uart->uart_device, &g_sUartConfig);
|
||
|
|
|
||
|
|
/* Enable the UART */
|
||
|
|
am_hal_uart_enable(uart->uart_device);
|
||
|
|
|
||
|
|
/* Enable the UART FIFO */
|
||
|
|
//am_hal_uart_fifo_config(uart->uart_device, AM_HAL_UART_TX_FIFO_1_2 | AM_HAL_UART_RX_FIFO_1_2);
|
||
|
|
}
|
||
|
|
|
||
|
|
static void NVIC_Configuration(struct am_uart* uart)
|
||
|
|
{
|
||
|
|
/* Enable interrupts */
|
||
|
|
am_hal_uart_int_enable(uart->uart_device, AM_HAL_UART_INT_RX);
|
||
|
|
|
||
|
|
/* Enable the uart interrupt in the NVIC */
|
||
|
|
am_hal_interrupt_enable(uart->uart_interrupt);
|
||
|
|
am_hal_uart_int_clear(uart->uart_device, 0xFFFFFFFF);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Initialize the UART
|
||
|
|
*
|
||
|
|
* This function initialize the UART
|
||
|
|
*
|
||
|
|
* @return None.
|
||
|
|
*/
|
||
|
|
void rt_hw_uart_init(void)
|
||
|
|
{
|
||
|
|
struct am_uart* uart;
|
||
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
||
|
|
|
||
|
|
GPIO_Configuration();
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
uart = &uart0;
|
||
|
|
config.baud_rate = BAUD_RATE_115200;
|
||
|
|
|
||
|
|
RCC_Configuration(uart);
|
||
|
|
NVIC_Configuration(uart);
|
||
|
|
|
||
|
|
serial0.ops = &am_uart_ops;
|
||
|
|
serial0.config = config;
|
||
|
|
|
||
|
|
/* register UART1 device */
|
||
|
|
rt_hw_serial_register(&serial0, "uart0",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX |
|
||
|
|
RT_DEVICE_FLAG_INT_TX, uart);
|
||
|
|
#endif /* RT_USING_UART0 */
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
uart = &uart1;
|
||
|
|
config.baud_rate = BAUD_RATE_115200;
|
||
|
|
|
||
|
|
RCC_Configuration(uart);
|
||
|
|
NVIC_Configuration(uart);
|
||
|
|
|
||
|
|
serial1.ops = &am_uart_ops;
|
||
|
|
serial1.config = config;
|
||
|
|
|
||
|
|
/* register UART1 device */
|
||
|
|
rt_hw_serial_register(&serial1, "uart1",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX |
|
||
|
|
RT_DEVICE_FLAG_INT_TX, uart);
|
||
|
|
#endif /* RT_USING_UART1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
/*@}*/
|