rtt-f030/bsp/ls1cdev/libraries/ls1c_regs.h

// 龙芯1c外设寄存器


#ifndef __OPENLOONGSON_LS1C_REGS_H
#define __OPENLOONGSON_LS1C_REGS_H


// 时钟相关寄存器地址
#define LS1C_START_FREQ                     (0xbfe78030)
#define LS1C_CLK_DIV_PARAM                  (0xbfe78034)


// gpio相关寄存器地址
#define LS1C_GPIO_CFG0                      (0xbfd010c0)
#define LS1C_GPIO_EN0                       (0xbfd010d0)
#define LS1C_GPIO_IN0                       (0xbfd010e0)
#define LS1C_GPIO_OUT0                      (0xbfd010f0)

#define LS1C_GPIO_CFG1                      (0xbfd010c4)
#define LS1C_GPIO_EN1                       (0xbfd010d4)
#define LS1C_GPIO_IN1                       (0xbfd010e4)
#define LS1C_GPIO_OUT1                      (0xbfd010f4)

#define LS1C_GPIO_CFG2                      (0xbfd010c8)
#define LS1C_GPIO_EN2                       (0xbfd010d8)
#define LS1C_GPIO_IN2                       (0xbfd010e8)
#define LS1C_GPIO_OUT2                      (0xbfd010f8)

#define LS1C_GPIO_CFG3                      (0xbfd010cc)
#define LS1C_GPIO_EN3                       (0xbfd010dc)
#define LS1C_GPIO_IN3                       (0xbfd010ec)
#define LS1C_GPIO_OUT3                      (0xbfd010fc)


// 复用相关寄存器
#define LS1C_CBUS_FIRST0                    (0xbfd011c0)
#define LS1C_CBUS_SECOND0                   (0xbfd011d0)
#define LS1C_CBUS_THIRD0                    (0xbfd011e0)
#define LS1C_CBUS_FOURTH0                   (0xbfd011f0)
#define LS1C_CBUS_FIFTH0                    (0xbfd01200)

#define LS1C_CBUS_FIRST1                    (0xbfd011c4)
#define LS1C_CBUS_SECOND1                   (0xbfd011d4)
#define LS1C_CBUS_THIRD1                    (0xbfd011e4)
#define LS1C_CBUS_FOURTH1                   (0xbfd011f4)
#define LS1C_CBUS_FIFTH1                    (0xbfd01204)

#define LS1C_CBUS_FIRST2                    (0xbfd011c8)
#define LS1C_CBUS_SECOND2                   (0xbfd011d8)
#define LS1C_CBUS_THIRD2                    (0xbfd011e8)
#define LS1C_CBUS_FOURTH2                   (0xbfd011f8)
#define LS1C_CBUS_FIFTH2                    (0xbfd01208)

#define LS1C_CBUS_FIRST3                    (0xbfd011cc)
#define LS1C_CBUS_SECOND3                   (0xbfd011dc)
#define LS1C_CBUS_THIRD3                    (0xbfd011ec)
#define LS1C_CBUS_FOURTH3                   (0xbfd011fc)
#define LS1C_CBUS_FIFTH3                    (0xbfd0120c)


// PWM寄存器偏移
#define LS1C_PWM_CNTR                       (0x0)
#define LS1C_PWM_HRC                        (0x4)
#define LS1C_PWM_LRC                        (0x8)
#define LS1C_PWM_CTRL                       (0xC)
// PWM基地址
#define LS1C_REG_BASE_PWM0                  (0xbfe5c000)
#define LS1C_REG_BASE_PWM1                  (0xbfe5c010)
#define LS1C_REG_BASE_PWM2                  (0xbfe5c020)
#define LS1C_REG_BASE_PWM3                  (0xbfe5c030)

//CAN基地址
#define  LS1C_REG_BASE_CAN0				    (0xbfe50000)
#define  LS1C_REG_BASE_CAN1					(0xbfe54000)

// 中断配置寄存器
#define LS1C_INT0_SR                        (0xbfd01040)
#define LS1C_INT0_EN                        (0xbfd01044)
#define LS1C_INT0_SET                       (0xbfd01048)
#define LS1C_INT0_CLR                       (0xbfd0104c)
#define LS1C_INT0_POL                       (0xbfd01050)
#define LS1C_INT0_EDGE                      (0xbfd01054)

#define LS1c_INT1_SR                        (0xbfd01058)
#define LS1C_INT1_EN                        (0xbfd0105c)
#define LS1C_INT1_SET                       (0xbfd01060)
#define LS1C_INT1_CLR                       (0xbfd01064)
#define LS1C_INT1_POL                       (0xbfd01068)
#define LS1C_INT1_EDGE                      (0xbfd0106c)

#define LS1C_INT2_SR                        (0xbfd01070)
#define LS1C_INT2_EN                        (0xbfd01074)
#define LS1C_INT2_SET                       (0xbfd01078)
#define LS1C_INT2_CLR                       (0xbfd0107c)
#define LS1C_INT2_POL                       (0xbfd01080)
#define LS1C_INT2_EDGE                      (0xbfd01084)

#define LS1C_INT3_SR                        (0xbfd01088)
#define LS1C_INT3_EN                        (0xbfd0108c)
#define LS1C_INT3_SET                       (0xbfd01090)
#define LS1C_INT3_CLR                       (0xbfd01094)
#define LS1C_INT3_POL                       (0xbfd01098)
#define LS1C_INT3_EDGE                      (0xbfd0109c)

#define LS1C_INT4_SR                        (0xbfd010a0)
#define LS1C_INT4_EN                        (0xbfd010a4)
#define LS1C_INT4_SET                       (0xbfd010a8)
#define LS1C_INT4_CLR                       (0xbfd010ac)
#define LS1C_INT4_POL                       (0xbfd010b0)
#define LS1C_INT4_EDGE                      (0xbfd010b4)


// I2C寄存器
#define LS1C_I2C0_BASE                      (0xbfe58000)
#define LS1C_I2C1_BASE                      (0xbfe68000)
#define LS1C_I2C2_BASE                      (0xbfe70000)


// SPI寄存器
#define LS1C_SPI0_BASE                      (0xbfe80000)
#define LS1C_SPI1_BASE                      (0xbfec0000)


// 串口寄存器
#define LS1C_UART00_BASE                    (0xbfe40000)
#define LS1C_UART01_BASE                    (0xbfe41000)
#define LS1C_UART1_BASE                     (0xbfe44000)
#define LS1C_UART2_BASE                     (0xbfe48000)
#define LS1C_UART3_BASE                     (0xbfe4c000)
#define LS1C_UART4_BASE                     (0xbfe4c400)
#define LS1C_UART5_BASE                     (0xbfe4c500)
#define LS1C_UART6_BASE                     (0xbfe4c600)
#define LS1C_UART7_BASE                     (0xbfe4c700)
#define LS1C_UART8_BASE                     (0xbfe4c800)
#define LS1C_UART9_BASE                     (0xbfe4c900)
#define LS1C_UART10_BASE                    (0xbfe4ca00)
#define LS1C_UART11_BASE                    (0xbfe4cb00)


#endif
[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// 龙芯1c外设寄存器`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00

			`#ifndef __OPENLOONGSON_LS1C_REGS_H`
			`#define __OPENLOONGSON_LS1C_REGS_H`




[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// 时钟相关寄存器地址`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#define LS1C_START_FREQ (0xbfe78030)`
			`#define LS1C_CLK_DIV_PARAM (0xbfe78034)`


[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// gpio相关寄存器地址`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#define LS1C_GPIO_CFG0 (0xbfd010c0)`
			`#define LS1C_GPIO_EN0 (0xbfd010d0)`
			`#define LS1C_GPIO_IN0 (0xbfd010e0)`
			`#define LS1C_GPIO_OUT0 (0xbfd010f0)`

			`#define LS1C_GPIO_CFG1 (0xbfd010c4)`
			`#define LS1C_GPIO_EN1 (0xbfd010d4)`
			`#define LS1C_GPIO_IN1 (0xbfd010e4)`
			`#define LS1C_GPIO_OUT1 (0xbfd010f4)`

			`#define LS1C_GPIO_CFG2 (0xbfd010c8)`
			`#define LS1C_GPIO_EN2 (0xbfd010d8)`
			`#define LS1C_GPIO_IN2 (0xbfd010e8)`
			`#define LS1C_GPIO_OUT2 (0xbfd010f8)`

			`#define LS1C_GPIO_CFG3 (0xbfd010cc)`
			`#define LS1C_GPIO_EN3 (0xbfd010dc)`
			`#define LS1C_GPIO_IN3 (0xbfd010ec)`
			`#define LS1C_GPIO_OUT3 (0xbfd010fc)`



[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// 复用相关寄存器`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#define LS1C_CBUS_FIRST0 (0xbfd011c0)`
			`#define LS1C_CBUS_SECOND0 (0xbfd011d0)`
			`#define LS1C_CBUS_THIRD0 (0xbfd011e0)`
			`#define LS1C_CBUS_FOURTH0 (0xbfd011f0)`
			`#define LS1C_CBUS_FIFTH0 (0xbfd01200)`

			`#define LS1C_CBUS_FIRST1 (0xbfd011c4)`
			`#define LS1C_CBUS_SECOND1 (0xbfd011d4)`
			`#define LS1C_CBUS_THIRD1 (0xbfd011e4)`
			`#define LS1C_CBUS_FOURTH1 (0xbfd011f4)`
			`#define LS1C_CBUS_FIFTH1 (0xbfd01204)`

			`#define LS1C_CBUS_FIRST2 (0xbfd011c8)`
			`#define LS1C_CBUS_SECOND2 (0xbfd011d8)`
			`#define LS1C_CBUS_THIRD2 (0xbfd011e8)`
			`#define LS1C_CBUS_FOURTH2 (0xbfd011f8)`
			`#define LS1C_CBUS_FIFTH2 (0xbfd01208)`

			`#define LS1C_CBUS_FIRST3 (0xbfd011cc)`
			`#define LS1C_CBUS_SECOND3 (0xbfd011dc)`
			`#define LS1C_CBUS_THIRD3 (0xbfd011ec)`
			`#define LS1C_CBUS_FOURTH3 (0xbfd011fc)`
			`#define LS1C_CBUS_FIFTH3 (0xbfd0120c)`


[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// PWM寄存器偏移`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#define LS1C_PWM_CNTR (0x0)`
			`#define LS1C_PWM_HRC (0x4)`
			`#define LS1C_PWM_LRC (0x8)`
			`#define LS1C_PWM_CTRL (0xC)`
[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// PWM基地址`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#define LS1C_REG_BASE_PWM0 (0xbfe5c000)`
			`#define LS1C_REG_BASE_PWM1 (0xbfe5c010)`
			`#define LS1C_REG_BASE_PWM2 (0xbfe5c020)`
			`#define LS1C_REG_BASE_PWM3 (0xbfe5c030)`

[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`//CAN基地址`
			`#define LS1C_REG_BASE_CAN0 (0xbfe50000)`
			`#define LS1C_REG_BASE_CAN1 (0xbfe54000)`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00
[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// 中断配置寄存器`
支持GPIO中断（外部中断） 2017-07-20 17:35:03 +08:00			`#define LS1C_INT0_SR (0xbfd01040)`
			`#define LS1C_INT0_EN (0xbfd01044)`
			`#define LS1C_INT0_SET (0xbfd01048)`
			`#define LS1C_INT0_CLR (0xbfd0104c)`
			`#define LS1C_INT0_POL (0xbfd01050)`
			`#define LS1C_INT0_EDGE (0xbfd01054)`

			`#define LS1c_INT1_SR (0xbfd01058)`
			`#define LS1C_INT1_EN (0xbfd0105c)`
			`#define LS1C_INT1_SET (0xbfd01060)`
			`#define LS1C_INT1_CLR (0xbfd01064)`
			`#define LS1C_INT1_POL (0xbfd01068)`
			`#define LS1C_INT1_EDGE (0xbfd0106c)`

			`#define LS1C_INT2_SR (0xbfd01070)`
			`#define LS1C_INT2_EN (0xbfd01074)`
			`#define LS1C_INT2_SET (0xbfd01078)`
			`#define LS1C_INT2_CLR (0xbfd0107c)`
			`#define LS1C_INT2_POL (0xbfd01080)`
			`#define LS1C_INT2_EDGE (0xbfd01084)`

			`#define LS1C_INT3_SR (0xbfd01088)`
			`#define LS1C_INT3_EN (0xbfd0108c)`
			`#define LS1C_INT3_SET (0xbfd01090)`
			`#define LS1C_INT3_CLR (0xbfd01094)`
			`#define LS1C_INT3_POL (0xbfd01098)`
			`#define LS1C_INT3_EDGE (0xbfd0109c)`

			`#define LS1C_INT4_SR (0xbfd010a0)`
			`#define LS1C_INT4_EN (0xbfd010a4)`
			`#define LS1C_INT4_SET (0xbfd010a8)`
			`#define LS1C_INT4_CLR (0xbfd010ac)`
			`#define LS1C_INT4_POL (0xbfd010b0)`
			`#define LS1C_INT4_EDGE (0xbfd010b4)`
将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00

[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// I2C寄存器`
增加龙芯1c硬件I2C接口 2017-09-06 12:11:46 +08:00			`#define LS1C_I2C0_BASE (0xbfe58000)`
			`#define LS1C_I2C1_BASE (0xbfe68000)`
			`#define LS1C_I2C2_BASE (0xbfe70000)`

将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00
[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// SPI寄存器`
增加龙芯1c的硬件SPI相关接口 2017-10-23 17:10:48 +08:00			`#define LS1C_SPI0_BASE (0xbfe80000)`
			`#define LS1C_SPI1_BASE (0xbfec0000)`


[BSP][ls1c]Add can driver and lib 2018-02-09 07:10:56 +08:00			`// 串口寄存器`
[bsp/ls1cdev] 1、uart驱动重写，采用uart驱动框架 2、添加并修改勤为本ls1c_uart 3、开启main为用户程序入口，删除application.c和startup.c,并对初始化部分做相应调整更新。 4、开启dhcp 2018-05-10 22:20:37 +08:00			`#define LS1C_UART00_BASE (0xbfe40000)`
			`#define LS1C_UART01_BASE (0xbfe41000)`
增加龙芯1c的硬件SPI相关接口 2017-10-23 17:10:48 +08:00			`#define LS1C_UART1_BASE (0xbfe44000)`
			`#define LS1C_UART2_BASE (0xbfe48000)`
[bsp/ls1cdev] 1、uart驱动重写，采用uart驱动框架 2、添加并修改勤为本ls1c_uart 3、开启main为用户程序入口，删除application.c和startup.c,并对初始化部分做相应调整更新。 4、开启dhcp 2018-05-10 22:20:37 +08:00			`#define LS1C_UART3_BASE (0xbfe4c000)`
			`#define LS1C_UART4_BASE (0xbfe4c400)`
			`#define LS1C_UART5_BASE (0xbfe4c500)`
			`#define LS1C_UART6_BASE (0xbfe4c600)`
			`#define LS1C_UART7_BASE (0xbfe4c700)`
			`#define LS1C_UART8_BASE (0xbfe4c800)`
			`#define LS1C_UART9_BASE (0xbfe4c900)`
			`#define LS1C_UART10_BASE (0xbfe4ca00)`
			`#define LS1C_UART11_BASE (0xbfe4cb00)`

增加龙芯1c的硬件SPI相关接口 2017-10-23 17:10:48 +08:00

将“龙芯1c库”中的GPIO相关接口移植到RT-Thread 2017-07-18 11:15:10 +08:00			`#endif`