rtt-f030/bsp/rm48x50/HALCoGen/include/usbdcdc.h

353 lines
12 KiB
C
Raw Normal View History

//*****************************************************************************
//
// usbdcdc.h - USBLib support for generic CDC ACM (serial) device.
//
// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
//
//*****************************************************************************
#ifndef __USBDCDC_H__
#define __USBDCDC_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
//! \addtogroup cdc_device_class_api
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
// PRIVATE
//
// The first few sections of this header are private defines that are used by
// the USB CDC Serial code and are here only to help with the application
// allocating the correct amount of memory for the CDC Serial device code.
//
//*****************************************************************************
//*****************************************************************************
//
// PRIVATE
//
// This enumeration holds the various states that the device can be in during
// normal operation.
//
//*****************************************************************************
typedef enum
{
//
// Unconfigured.
//
CDC_STATE_UNCONFIGURED,
//
// No outstanding transaction remains to be completed.
//
CDC_STATE_IDLE,
//
// Waiting on completion of a send or receive transaction.
//
CDC_STATE_WAIT_DATA,
//
// Waiting for client to process data.
//
CDC_STATE_WAIT_CLIENT
}
tCDCState;
//*****************************************************************************
//
// PRIVATE
//
// This structure defines the private instance data and state variables for the
// CDC Serial device. The memory for this structure is pointed to by the
// psPrivateCDCSerData field in the tUSBDCDCDevice structure passed on
// USBDCDCInit().
//
//*****************************************************************************
typedef struct
{
uint32 ulUSBBase;
tDeviceInfo *psDevInfo;
tConfigDescriptor *psConfDescriptor;
volatile tCDCState eCDCRxState;
volatile tCDCState eCDCTxState;
volatile tCDCState eCDCRequestState;
volatile tCDCState eCDCInterruptState;
volatile uint8 ucPendingRequest;
uint16 usBreakDuration;
uint16 usControlLineState;
uint16 usSerialState;
volatile uint16 usDeferredOpFlags;
uint16 usLastTxSize;
tLineCoding sLineCoding;
volatile tBoolean bRxBlocked;
volatile tBoolean bControlBlocked;
volatile tBoolean bConnected;
uint8 ucControlEndpoint;
uint8 ucBulkINEndpoint;
uint8 ucBulkOUTEndpoint;
uint8 ucInterfaceControl;
uint8 ucInterfaceData;
}
tCDCSerInstance;
#ifndef DEPRECATED
//*****************************************************************************
//
// The number of bytes of workspace required by the CDC device class driver.
// The client must provide a block of RAM of at least this size in the
// psPrivateCDCSerData field of the tUSBCDCDevice structure passed on
// USBDCDCInit().
//
// This value is deprecated and should not be used, any new code should just
// pass in a tUSBCDCDevice structure in the psPrivateCDCSerData field.
//
//*****************************************************************************
#define USB_CDCSER_WORKSPACE_SIZE (sizeof(tCDCSerInstance))
#endif
//*****************************************************************************
//
// The following defines are used when working with composite devices.
//
//*****************************************************************************
//*****************************************************************************
//
//! The size of the memory that should be allocated to create a configuration
//! descriptor for a single instance of the USB Serial CDC Device.
//! This does not include the configuration descriptor which is automatically
//! ignored by the composite device class.
//
// For reference this is sizeof(g_pIADSerDescriptor) +
// sizeof(g_pCDCSerCommInterface) + sizeof(g_pCDCSerDataInterface)
//
//*****************************************************************************
#define COMPOSITE_DCDC_SIZE (8 + 35 + 23)
//*****************************************************************************
//
// CDC-specific events These events are provided to the application in the
// \e ulMsg parameter of the tUSBCallback function.
//
//*****************************************************************************
//
//! The host requests that the device send a BREAK condition on its
//! serial communication channel. The BREAK should remain active until
//! a USBD_CDC_EVENT_CLEAR_BREAK event is received.
//
#define USBD_CDC_EVENT_SEND_BREAK (USBD_CDC_EVENT_BASE + 0)
//
//! The host requests that the device stop sending a BREAK condition on its
//! serial communication channel.
//
#define USBD_CDC_EVENT_CLEAR_BREAK (USBD_CDC_EVENT_BASE + 1)
//
//! The host requests that the device set the RS232 signaling lines to
//! a particular state. The ulMsgValue parameter contains the RTS and
//! DTR control line states as defined in table 51 of the USB CDC class
//! definition and is a combination of the following values:
//!
//! (RTS) USB_CDC_DEACTIVATE_CARRIER or USB_CDC_ACTIVATE_CARRIER
//! (DTR) USB_CDC_DTE_NOT_PRESENT or USB_CDC_DTE_PRESENT
//
#define USBD_CDC_EVENT_SET_CONTROL_LINE_STATE (USBD_CDC_EVENT_BASE + 2)
//
//! The host requests that the device set the RS232 communication
//! parameters. The pvMsgData parameter points to a tLineCoding structure
//! defining the required number of bits per character, parity mode,
//! number of stop bits and the baud rate.
//
#define USBD_CDC_EVENT_SET_LINE_CODING (USBD_CDC_EVENT_BASE + 3)
//
//! The host is querying the current RS232 communication parameters. The
//! pvMsgData parameter points to a tLineCoding structure that the
//! application must fill with the current settings prior to returning
//! from the callback.
//
#define USBD_CDC_EVENT_GET_LINE_CODING (USBD_CDC_EVENT_BASE + 4)
//*****************************************************************************
//
//! The structure used by the application to define operating parameters for
//! the CDC device.
//
//*****************************************************************************
typedef struct
{
//
//! The vendor ID that this device is to present in the device descriptor.
//
uint16 usVID;
//
//! The product ID that this device is to present in the device descriptor.
//
uint16 usPID;
//
//! The maximum power consumption of the device, expressed in milliamps.
//
uint16 usMaxPowermA;
//
//! Indicates whether the device is self- or bus-powered and whether or not
//! it supports remote wakeup. Valid values are USB_CONF_ATTR_SELF_PWR or
//! USB_CONF_ATTR_BUS_PWR, optionally ORed with USB_CONF_ATTR_RWAKE.
//
uint8 ucPwrAttributes;
//
//! A pointer to the callback function which will be called to notify
//! the application of all asynchronous control events related to the
//! operation of the device.
//
tUSBCallback pfnControlCallback;
//
//! A client-supplied pointer which will be sent as the first
//! parameter in all calls made to the control channel callback,
//! pfnControlCallback.
//
void *pvControlCBData;
//
//! A pointer to the callback function which will be called to notify
//! the application of events related to the device's data receive channel.
//
tUSBCallback pfnRxCallback;
//
//! A client-supplied pointer which will be sent as the first
//! parameter in all calls made to the receive channel callback,
//! pfnRxCallback.
//
void *pvRxCBData;
//
//! A pointer to the callback function which will be called to notify
//! the application of events related to the device's data transmit
//! channel.
//
tUSBCallback pfnTxCallback;
//
//! A client-supplied pointer which will be sent as the first
//! parameter in all calls made to the transmit channel callback,
//! pfnTxCallback.
//
void *pvTxCBData;
//
//! A pointer to the string descriptor array for this device. This array
//! must contain the following string descriptor pointers in this order.
//! Language descriptor, Manufacturer name string (language 1), Product
//! name string (language 1), Serial number string (language 1),
//! Control interface description string (language 1), Configuration
//! description string (language 1).
//!
//! If supporting more than 1 language, the strings for indices 1 through 5
//! must be repeated for each of the other languages defined in the
//! language descriptor.
//
const uint8 * const *ppStringDescriptors;
//
//! The number of descriptors provided in the ppStringDescriptors
//! array. This must be 1 + (5 * number of supported languages).
//
uint32 ulNumStringDescriptors;
//
//! A pointer to the private instance data for this device. This memory
//! must remain accessible for as long as the CDC device is in use and must
//! not be modified by any code outside the CDC class driver.
//
tCDCSerInstance *psPrivateCDCSerData;
}
tUSBDCDCDevice;
extern tDeviceInfo g_sCDCSerDeviceInfo;
//*****************************************************************************
//
// API Function Prototypes
//
//*****************************************************************************
extern void * USBDCDCCompositeInit(uint32 ulIndex,
const tUSBDCDCDevice *psCDCDevice);
extern void *USBDCDCInit(uint32 ulIndex,
const tUSBDCDCDevice *psCDCDevice);
extern void USBDCDCTerm(void *pvInstance);
extern void *USBDCDCSetControlCBData(void *pvInstance, void *pvCBData);
extern void *USBDCDCSetRxCBData(void *pvInstance, void *pvCBData);
extern void *USBDCDCSetTxCBData(void *pvInstance, void *pvCBData);
extern uint32 USBDCDCPacketWrite(void *pvInstance,
uint8 *pcData,
uint32 ulLength,
tBoolean bLast);
extern uint32 USBDCDCPacketRead(void *pvInstance,
uint8 *pcData,
uint32 ulLength,
tBoolean bLast);
extern uint32 USBDCDCTxPacketAvailable(void *pvInstance);
extern uint32 USBDCDCRxPacketAvailable(void *pvInstance);
extern void USBDCDCSerialStateChange(void *pvInstance,
uint16 usState);
extern void USBDCDCPowerStatusSet(void *pvInstance, uint8 ucPower);
extern tBoolean USBDCDCRemoteWakeupRequest(void *pvInstance);
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __USBDCDC_H__