rtt-f030/bsp/lm3s9b9x/Libraries/inc/hw_memmap.h

153 lines
8.0 KiB
C
Raw Normal View History

//*****************************************************************************
//
// hw_memmap.h - Macros defining the memory map of Stellaris.
//
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_MEMMAP_H__
#define __HW_MEMMAP_H__
//*****************************************************************************
//
// The following are defines for the base address of the memories and
// peripherals.
//
//*****************************************************************************
#define FLASH_BASE 0x00000000 // FLASH memory
#define SRAM_BASE 0x20000000 // SRAM memory
#define WATCHDOG0_BASE 0x40000000 // Watchdog0
#define WATCHDOG1_BASE 0x40001000 // Watchdog1
#define GPIO_PORTA_BASE 0x40004000 // GPIO Port A
#define GPIO_PORTB_BASE 0x40005000 // GPIO Port B
#define GPIO_PORTC_BASE 0x40006000 // GPIO Port C
#define GPIO_PORTD_BASE 0x40007000 // GPIO Port D
#define SSI0_BASE 0x40008000 // SSI0
#define SSI1_BASE 0x40009000 // SSI1
#define SSI2_BASE 0x4000A000 // SSI2
#define SSI3_BASE 0x4000B000 // SSI3
#define UART0_BASE 0x4000C000 // UART0
#define UART1_BASE 0x4000D000 // UART1
#define UART2_BASE 0x4000E000 // UART2
#define UART3_BASE 0x4000F000 // UART3
#define UART4_BASE 0x40010000 // UART4
#define UART5_BASE 0x40011000 // UART5
#define UART6_BASE 0x40012000 // UART6
#define UART7_BASE 0x40013000 // UART7
#define I2C0_MASTER_BASE 0x40020000 // I2C0 Master
#define I2C0_SLAVE_BASE 0x40020800 // I2C0 Slave
#define I2C1_MASTER_BASE 0x40021000 // I2C1 Master
#define I2C1_SLAVE_BASE 0x40021800 // I2C1 Slave
#define I2C2_MASTER_BASE 0x40022000 // I2C2 Master
#define I2C2_SLAVE_BASE 0x40022800 // I2C2 Slave
#define I2C3_MASTER_BASE 0x40023000 // I2C3 Master
#define I2C3_SLAVE_BASE 0x40023800 // I2C3 Slave
#define GPIO_PORTE_BASE 0x40024000 // GPIO Port E
#define GPIO_PORTF_BASE 0x40025000 // GPIO Port F
#define GPIO_PORTG_BASE 0x40026000 // GPIO Port G
#define GPIO_PORTH_BASE 0x40027000 // GPIO Port H
#define PWM0_BASE 0x40028000 // Pulse Width Modulator (PWM)
#define PWM1_BASE 0x40029000 // Pulse Width Modulator (PWM)
#define QEI0_BASE 0x4002C000 // QEI0
#define QEI1_BASE 0x4002D000 // QEI1
#define TIMER0_BASE 0x40030000 // Timer0
#define TIMER1_BASE 0x40031000 // Timer1
#define TIMER2_BASE 0x40032000 // Timer2
#define TIMER3_BASE 0x40033000 // Timer3
#define TIMER4_BASE 0x40034000 // Timer4
#define TIMER5_BASE 0x40035000 // Timer5
#define WTIMER0_BASE 0x40036000 // Wide Timer0
#define WTIMER1_BASE 0x40037000 // Wide Timer1
#define ADC0_BASE 0x40038000 // ADC0
#define ADC1_BASE 0x40039000 // ADC1
#define COMP_BASE 0x4003C000 // Analog comparators
#define GPIO_PORTJ_BASE 0x4003D000 // GPIO Port J
#define CAN0_BASE 0x40040000 // CAN0
#define CAN1_BASE 0x40041000 // CAN1
#define CAN2_BASE 0x40042000 // CAN2
#define ETH_BASE 0x40048000 // Ethernet
#define MAC_BASE 0x40048000 // Ethernet
#define WTIMER2_BASE 0x4004C000 // Wide Timer2
#define WTIMER3_BASE 0x4004D000 // Wide Timer3
#define WTIMER4_BASE 0x4004E000 // Wide Timer4
#define WTIMER5_BASE 0x4004F000 // Wide Timer5
#define USB0_BASE 0x40050000 // USB 0 Controller
#define I2S0_BASE 0x40054000 // I2S0
#define GPIO_PORTA_AHB_BASE 0x40058000 // GPIO Port A (high speed)
#define GPIO_PORTB_AHB_BASE 0x40059000 // GPIO Port B (high speed)
#define GPIO_PORTC_AHB_BASE 0x4005A000 // GPIO Port C (high speed)
#define GPIO_PORTD_AHB_BASE 0x4005B000 // GPIO Port D (high speed)
#define GPIO_PORTE_AHB_BASE 0x4005C000 // GPIO Port E (high speed)
#define GPIO_PORTF_AHB_BASE 0x4005D000 // GPIO Port F (high speed)
#define GPIO_PORTG_AHB_BASE 0x4005E000 // GPIO Port G (high speed)
#define GPIO_PORTH_AHB_BASE 0x4005F000 // GPIO Port H (high speed)
#define GPIO_PORTJ_AHB_BASE 0x40060000 // GPIO Port J (high speed)
#define GPIO_PORTK_BASE 0x40061000 // GPIO Port K
#define GPIO_PORTL_BASE 0x40062000 // GPIO Port L
#define GPIO_PORTM_BASE 0x40063000 // GPIO Port M
#define GPIO_PORTN_BASE 0x40064000 // GPIO Port N
#define GPIO_PORTP_BASE 0x40065000 // GPIO Port P
#define GPIO_PORTQ_BASE 0x40066000 // GPIO Port Q
#define LPC0_BASE 0x40080000 // Low Pin Count Interface (LPC)
#define FAN0_BASE 0x40084000 // Fan Control (FAN)
#define EEPROM_BASE 0x400AF000 // EEPROM memory
#define PECI0_BASE 0x400B0000 // Platform Environment Control
// Interface (PECI)
#define I2C4_MASTER_BASE 0x400C0000 // I2C4 Master
#define I2C4_SLAVE_BASE 0x400C0800 // I2C4 Slave
#define I2C5_MASTER_BASE 0x400C1000 // I2C5 Master
#define I2C5_SLAVE_BASE 0x400C1800 // I2C5 Slave
#define EPI0_BASE 0x400D0000 // EPI0
#define SYSEXC_BASE 0x400F9000 // System Exception Module
#define HIB_BASE 0x400FC000 // Hibernation Module
#define FLASH_CTRL_BASE 0x400FD000 // FLASH Controller
#define SYSCTL_BASE 0x400FE000 // System Control
#define UDMA_BASE 0x400FF000 // uDMA Controller
#define ITM_BASE 0xE0000000 // Instrumentation Trace Macrocell
#define DWT_BASE 0xE0001000 // Data Watchpoint and Trace
#define FPB_BASE 0xE0002000 // FLASH Patch and Breakpoint
#define NVIC_BASE 0xE000E000 // Nested Vectored Interrupt Ctrl
#define TPIU_BASE 0xE0040000 // Trace Port Interface Unit
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the base address of the memories
// and peripherals.
//
//*****************************************************************************
#define WATCHDOG_BASE 0x40000000 // Watchdog
#define SSI_BASE 0x40008000 // SSI
#define I2C_MASTER_BASE 0x40020000 // I2C Master
#define I2C_SLAVE_BASE 0x40020800 // I2C Slave
#define PWM_BASE 0x40028000 // PWM
#define QEI_BASE 0x4002C000 // QEI
#define ADC_BASE 0x40038000 // ADC
#endif
#endif // __HW_MEMMAP_H__