rtt-f030/bsp/frdm-k64f/device/MK64F12/MK64F12_dmamux.h

221 lines
8.4 KiB
C
Raw Normal View History

2014-06-29 00:34:20 +08:00
/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_DMAMUX_REGISTERS_H__
#define __HW_DMAMUX_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 DMAMUX
*
* DMA channel multiplexor
*
* Registers defined in this header file:
* - HW_DMAMUX_CHCFGn - Channel Configuration register
*
* - hw_dmamux_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_DMAMUX_BASE
#define HW_DMAMUX_INSTANCE_COUNT (1U) //!< Number of instances of the DMAMUX module.
#define HW_DMAMUX0 (0U) //!< Instance number for DMAMUX.
#define REGS_DMAMUX0_BASE (0x40021000U) //!< Base address for DMAMUX.
//! @brief Table of base addresses for DMAMUX instances.
static const uint32_t __g_regs_DMAMUX_base_addresses[] = {
REGS_DMAMUX0_BASE,
};
//! @brief Get the base address of DMAMUX by instance number.
//! @param x DMAMUX instance number, from 0 through 0.
#define REGS_DMAMUX_BASE(x) (__g_regs_DMAMUX_base_addresses[(x)])
//! @brief Get the instance number given a base address.
//! @param b Base address for an instance of DMAMUX.
#define REGS_DMAMUX_INSTANCE(b) ((b) == REGS_DMAMUX0_BASE ? HW_DMAMUX0 : 0)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMAMUX_CHCFGn - Channel Configuration register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMAMUX_CHCFGn - Channel Configuration register (RW)
*
* Reset value: 0x00U
*
* Each of the DMA channels can be independently enabled/disabled and associated
* with one of the DMA slots (peripheral slots or always-on slots) in the
* system. Setting multiple CHCFG registers with the same source value will result in
* unpredictable behavior. This is true, even if a channel is disabled (ENBL==0).
* Before changing the trigger or source settings, a DMA channel must be disabled
* via CHCFGn[ENBL].
*/
typedef union _hw_dmamux_chcfgn
{
uint8_t U;
struct _hw_dmamux_chcfgn_bitfields
{
uint8_t SOURCE : 6; //!< [5:0] DMA Channel Source (Slot)
uint8_t TRIG : 1; //!< [6] DMA Channel Trigger Enable
uint8_t ENBL : 1; //!< [7] DMA Channel Enable
} B;
} hw_dmamux_chcfgn_t;
#endif
/*!
* @name Constants and macros for entire DMAMUX_CHCFGn register
*/
//@{
#define HW_DMAMUX_CHCFGn_COUNT (16U)
#define HW_DMAMUX_CHCFGn_ADDR(x, n) (REGS_DMAMUX_BASE(x) + 0x0U + (0x1U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMAMUX_CHCFGn(x, n) (*(__IO hw_dmamux_chcfgn_t *) HW_DMAMUX_CHCFGn_ADDR(x, n))
#define HW_DMAMUX_CHCFGn_RD(x, n) (HW_DMAMUX_CHCFGn(x, n).U)
#define HW_DMAMUX_CHCFGn_WR(x, n, v) (HW_DMAMUX_CHCFGn(x, n).U = (v))
#define HW_DMAMUX_CHCFGn_SET(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) | (v)))
#define HW_DMAMUX_CHCFGn_CLR(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) & ~(v)))
#define HW_DMAMUX_CHCFGn_TOG(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMAMUX_CHCFGn bitfields
*/
/*!
* @name Register DMAMUX_CHCFGn, field SOURCE[5:0] (RW)
*
* Specifies which DMA source, if any, is routed to a particular DMA channel.
* See your device's chip configuration details for information about the
* peripherals and their slot numbers.
*/
//@{
#define BP_DMAMUX_CHCFGn_SOURCE (0U) //!< Bit position for DMAMUX_CHCFGn_SOURCE.
#define BM_DMAMUX_CHCFGn_SOURCE (0x3FU) //!< Bit mask for DMAMUX_CHCFGn_SOURCE.
#define BS_DMAMUX_CHCFGn_SOURCE (6U) //!< Bit field size in bits for DMAMUX_CHCFGn_SOURCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMAMUX_CHCFGn_SOURCE field.
#define BR_DMAMUX_CHCFGn_SOURCE(x, n) (HW_DMAMUX_CHCFGn(x, n).B.SOURCE)
#endif
//! @brief Format value for bitfield DMAMUX_CHCFGn_SOURCE.
#define BF_DMAMUX_CHCFGn_SOURCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMAMUX_CHCFGn_SOURCE), uint8_t) & BM_DMAMUX_CHCFGn_SOURCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SOURCE field to a new value.
#define BW_DMAMUX_CHCFGn_SOURCE(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, (HW_DMAMUX_CHCFGn_RD(x, n) & ~BM_DMAMUX_CHCFGn_SOURCE) | BF_DMAMUX_CHCFGn_SOURCE(v)))
#endif
//@}
/*!
* @name Register DMAMUX_CHCFGn, field TRIG[6] (RW)
*
* Enables the periodic trigger capability for the triggered DMA channel.
*
* Values:
* - 0 - Triggering is disabled. If triggering is disabled and ENBL is set, the
* DMA Channel will simply route the specified source to the DMA channel.
* (Normal mode)
* - 1 - Triggering is enabled. If triggering is enabled and ENBL is set, the
* DMAMUX is in Periodic Trigger mode.
*/
//@{
#define BP_DMAMUX_CHCFGn_TRIG (6U) //!< Bit position for DMAMUX_CHCFGn_TRIG.
#define BM_DMAMUX_CHCFGn_TRIG (0x40U) //!< Bit mask for DMAMUX_CHCFGn_TRIG.
#define BS_DMAMUX_CHCFGn_TRIG (1U) //!< Bit field size in bits for DMAMUX_CHCFGn_TRIG.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMAMUX_CHCFGn_TRIG field.
#define BR_DMAMUX_CHCFGn_TRIG(x, n) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_TRIG))
#endif
//! @brief Format value for bitfield DMAMUX_CHCFGn_TRIG.
#define BF_DMAMUX_CHCFGn_TRIG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMAMUX_CHCFGn_TRIG), uint8_t) & BM_DMAMUX_CHCFGn_TRIG)
#ifndef __LANGUAGE_ASM__
//! @brief Set the TRIG field to a new value.
#define BW_DMAMUX_CHCFGn_TRIG(x, n, v) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_TRIG) = (v))
#endif
//@}
/*!
* @name Register DMAMUX_CHCFGn, field ENBL[7] (RW)
*
* Enables the DMA channel.
*
* Values:
* - 0 - DMA channel is disabled. This mode is primarily used during
* configuration of the DMAMux. The DMA has separate channel enables/disables, which
* should be used to disable or reconfigure a DMA channel.
* - 1 - DMA channel is enabled
*/
//@{
#define BP_DMAMUX_CHCFGn_ENBL (7U) //!< Bit position for DMAMUX_CHCFGn_ENBL.
#define BM_DMAMUX_CHCFGn_ENBL (0x80U) //!< Bit mask for DMAMUX_CHCFGn_ENBL.
#define BS_DMAMUX_CHCFGn_ENBL (1U) //!< Bit field size in bits for DMAMUX_CHCFGn_ENBL.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMAMUX_CHCFGn_ENBL field.
#define BR_DMAMUX_CHCFGn_ENBL(x, n) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_ENBL))
#endif
//! @brief Format value for bitfield DMAMUX_CHCFGn_ENBL.
#define BF_DMAMUX_CHCFGn_ENBL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMAMUX_CHCFGn_ENBL), uint8_t) & BM_DMAMUX_CHCFGn_ENBL)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ENBL field to a new value.
#define BW_DMAMUX_CHCFGn_ENBL(x, n, v) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_ENBL) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_dmamux_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All DMAMUX module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_dmamux
{
__IO hw_dmamux_chcfgn_t CHCFGn[16]; //!< [0x0] Channel Configuration register
} hw_dmamux_t;
#pragma pack()
//! @brief Macro to access all DMAMUX registers.
//! @param x DMAMUX instance number.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_DMAMUX(0)</code>.
#define HW_DMAMUX(x) (*(hw_dmamux_t *) REGS_DMAMUX_BASE(x))
#endif
#endif // __HW_DMAMUX_REGISTERS_H__
// v22/130726/0.9
// EOF