422 lines
10 KiB
C
422 lines
10 KiB
C
|
/*
|
||
|
|
* File : gpio.c
|
||
|
|
* This file is part of RT-Thread RTOS
|
||
|
|
* COPYRIGHT (C) 2015, RT-Thread Development Team
|
||
|
|
*
|
||
|
|
* The license and distribution terms for this file may be
|
||
|
|
* found in the file LICENSE in this distribution or at
|
||
|
|
* http://www.rt-thread.org/license/LICENSE
|
||
|
|
*
|
||
|
|
* Change Logs:
|
||
|
|
* Date Author Notes
|
||
|
|
* 2017-10-20 ZYH the first version
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <board.h>
|
||
|
|
#include "spi_flash_w25qxx.h"
|
||
|
|
#define SPIRXEVENT 0x01
|
||
|
|
#define SPITXEVENT 0x02
|
||
|
|
|
||
|
|
#ifdef RT_USING_SPI
|
||
|
|
|
||
|
|
#define SPITIMEOUT 2
|
||
|
|
#define SPICRCEN 0
|
||
|
|
|
||
|
|
struct stm32_hw_spi_cs
|
||
|
|
{
|
||
|
|
rt_uint32_t pin;
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
struct stm32_spi
|
||
|
|
{
|
||
|
|
SPI_TypeDef *Instance;
|
||
|
|
struct rt_spi_configuration *cfg;
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
static rt_err_t stm32_spi_init(SPI_TypeDef *spix, struct rt_spi_configuration *cfg)
|
||
|
|
{
|
||
|
|
SPI_HandleTypeDef hspi;
|
||
|
|
hspi.Instance = spix;
|
||
|
|
|
||
|
|
if (cfg->mode & RT_SPI_SLAVE)
|
||
|
|
{
|
||
|
|
hspi.Init.Mode = SPI_MODE_SLAVE;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.Mode = SPI_MODE_MASTER;
|
||
|
|
}
|
||
|
|
if (cfg->mode & RT_SPI_3WIRE)
|
||
|
|
{
|
||
|
|
hspi.Init.Direction = SPI_DIRECTION_1LINE;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.Direction = SPI_DIRECTION_2LINES;
|
||
|
|
}
|
||
|
|
if (cfg->data_width == 8)
|
||
|
|
{
|
||
|
|
hspi.Init.DataSize = SPI_DATASIZE_8BIT;
|
||
|
|
}
|
||
|
|
else if (cfg->data_width == 16)
|
||
|
|
{
|
||
|
|
hspi.Init.DataSize = SPI_DATASIZE_16BIT;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
return RT_EIO;
|
||
|
|
}
|
||
|
|
if (cfg->mode & RT_SPI_CPHA)
|
||
|
|
{
|
||
|
|
hspi.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||
|
|
}
|
||
|
|
if (cfg->mode & RT_SPI_CPOL)
|
||
|
|
{
|
||
|
|
hspi.Init.CLKPolarity = SPI_POLARITY_HIGH;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||
|
|
}
|
||
|
|
if (cfg->mode & RT_SPI_NO_CS)
|
||
|
|
{
|
||
|
|
hspi.Init.NSS = SPI_NSS_SOFT;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.NSS = SPI_NSS_SOFT;
|
||
|
|
// hspi.Init.NSS = SPI_NSS_HARD_OUTPUT;
|
||
|
|
}
|
||
|
|
if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/2)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/4)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/8)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/16)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/32)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/64)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
|
||
|
|
}
|
||
|
|
else if(cfg->max_hz >= HAL_RCC_GetPCLK2Freq()/128)
|
||
|
|
{
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_128;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* min prescaler 256 */
|
||
|
|
hspi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
|
||
|
|
}
|
||
|
|
if (cfg->mode & RT_SPI_MSB)
|
||
|
|
{
|
||
|
|
hspi.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
hspi.Init.FirstBit = SPI_FIRSTBIT_LSB;
|
||
|
|
}
|
||
|
|
hspi.Init.TIMode = SPI_TIMODE_DISABLE;
|
||
|
|
hspi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||
|
|
hspi.Init.CRCPolynomial = 7;
|
||
|
|
hspi.State = HAL_SPI_STATE_RESET;
|
||
|
|
if (HAL_SPI_Init(&hspi) != HAL_OK)
|
||
|
|
{
|
||
|
|
return RT_EIO;
|
||
|
|
}
|
||
|
|
__HAL_SPI_ENABLE(&hspi);
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
#define SPISTEP(datalen) (((datalen) == 8) ? 1 : 2)
|
||
|
|
#define SPISEND_1(reg, ptr, datalen) \
|
||
|
|
do \
|
||
|
|
{ \
|
||
|
|
if (datalen == 8) \
|
||
|
|
{ \
|
||
|
|
(reg) = *(rt_uint8_t *)(ptr); \
|
||
|
|
} \
|
||
|
|
else \
|
||
|
|
{ \
|
||
|
|
(reg) = *(rt_uint16_t *)(ptr); \
|
||
|
|
} \
|
||
|
|
} while (0)
|
||
|
|
#define SPIRECV_1(reg, ptr, datalen) \
|
||
|
|
do \
|
||
|
|
{ \
|
||
|
|
if (datalen == 8) \
|
||
|
|
{ \
|
||
|
|
*(rt_uint8_t *)(ptr) = (reg); \
|
||
|
|
} \
|
||
|
|
else \
|
||
|
|
{ \
|
||
|
|
*(rt_uint16_t *)(ptr) = reg; \
|
||
|
|
} \
|
||
|
|
} while (0)
|
||
|
|
|
||
|
|
static rt_err_t spitxrx1b(struct stm32_spi *hspi, void *rcvb, const void *sndb)
|
||
|
|
{
|
||
|
|
rt_uint32_t padrcv = 0;
|
||
|
|
rt_uint32_t padsnd = 0xFF;
|
||
|
|
if (!rcvb && !sndb)
|
||
|
|
{
|
||
|
|
return RT_ERROR;
|
||
|
|
}
|
||
|
|
if (!rcvb)
|
||
|
|
{
|
||
|
|
rcvb = &padrcv;
|
||
|
|
}
|
||
|
|
if (!sndb)
|
||
|
|
{
|
||
|
|
sndb = &padsnd;
|
||
|
|
}
|
||
|
|
while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE) == RESET)
|
||
|
|
;
|
||
|
|
SPISEND_1(hspi->Instance->DR, sndb, hspi->cfg->data_width);
|
||
|
|
while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE) == RESET)
|
||
|
|
;
|
||
|
|
SPIRECV_1(hspi->Instance->DR, rcvb, hspi->cfg->data_width);
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
|
||
|
|
{
|
||
|
|
rt_err_t res;
|
||
|
|
RT_ASSERT(device != RT_NULL);
|
||
|
|
RT_ASSERT(device->bus != RT_NULL);
|
||
|
|
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
|
||
|
|
struct stm32_spi * hspi = (struct stm32_spi *)device->bus->parent.user_data;
|
||
|
|
struct stm32_hw_spi_cs *cs = device->parent.user_data;
|
||
|
|
|
||
|
|
if (message->cs_take)
|
||
|
|
{
|
||
|
|
rt_pin_write(cs->pin, 0);
|
||
|
|
}
|
||
|
|
const rt_uint8_t *sndb = message->send_buf;
|
||
|
|
rt_uint8_t *rcvb = message->recv_buf;
|
||
|
|
rt_int32_t length = message->length;
|
||
|
|
while (length)
|
||
|
|
{
|
||
|
|
res = spitxrx1b(hspi, rcvb, sndb);
|
||
|
|
if (rcvb)
|
||
|
|
{
|
||
|
|
rcvb += SPISTEP(hspi->cfg->data_width);
|
||
|
|
}
|
||
|
|
if (sndb)
|
||
|
|
{
|
||
|
|
sndb += SPISTEP(hspi->cfg->data_width);
|
||
|
|
}
|
||
|
|
if (res != RT_EOK)
|
||
|
|
{
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
length--;
|
||
|
|
}
|
||
|
|
/* Wait until Busy flag is reset before disabling SPI */
|
||
|
|
while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_BSY) == SET)
|
||
|
|
;
|
||
|
|
if (message->cs_release)
|
||
|
|
{
|
||
|
|
rt_pin_write(cs->pin, 1);
|
||
|
|
}
|
||
|
|
return message->length - length;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
rt_err_t spi_configure(struct rt_spi_device *device,
|
||
|
|
struct rt_spi_configuration *configuration)
|
||
|
|
{
|
||
|
|
struct stm32_spi * hspi = (struct stm32_spi *)device->bus->parent.user_data;
|
||
|
|
hspi->cfg = configuration;
|
||
|
|
return stm32_spi_init(hspi->Instance, configuration);
|
||
|
|
}
|
||
|
|
|
||
|
|
const struct rt_spi_ops stm_spi_ops =
|
||
|
|
{
|
||
|
|
.configure = spi_configure,
|
||
|
|
.xfer = spixfer,
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
int stm32_spi_register_bus(SPI_TypeDef * SPIx,const char * name)
|
||
|
|
{
|
||
|
|
struct rt_spi_bus * spi_bus = (struct rt_spi_bus *)rt_malloc(sizeof(struct rt_spi_bus));
|
||
|
|
RT_ASSERT(spi_bus != RT_NULL);
|
||
|
|
struct stm32_spi * spi = (struct stm32_spi *)rt_malloc(sizeof(struct stm32_spi));
|
||
|
|
RT_ASSERT(spi != RT_NULL);
|
||
|
|
spi->Instance = SPIx;
|
||
|
|
spi_bus->parent.user_data = spi;
|
||
|
|
return rt_spi_bus_register(spi_bus, name, &stm_spi_ops);
|
||
|
|
}
|
||
|
|
|
||
|
|
rt_err_t stm32_spi_bus_attach_device(rt_uint32_t pin,const char * bus_name,const char * device_name)
|
||
|
|
{
|
||
|
|
struct rt_spi_device * spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
|
||
|
|
RT_ASSERT(spi_device != RT_NULL);
|
||
|
|
struct stm32_hw_spi_cs * cs_pin = (struct stm32_hw_spi_cs *)rt_malloc(sizeof(struct stm32_hw_spi_cs));
|
||
|
|
RT_ASSERT(cs_pin != RT_NULL);
|
||
|
|
cs_pin->pin = pin;
|
||
|
|
rt_pin_mode(pin,PIN_MODE_OUTPUT);
|
||
|
|
rt_pin_write(pin, 1);
|
||
|
|
return rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin);
|
||
|
|
}
|
||
|
|
|
||
|
|
int stm32_hw_spi_init(void)
|
||
|
|
{
|
||
|
|
stm32_spi_register_bus(SPI2,"spi2");
|
||
|
|
stm32_spi_bus_attach_device(33,"spi2","cs_b12");
|
||
|
|
return w25qxx_init("flash0","cs_b12");
|
||
|
|
}
|
||
|
|
INIT_BOARD_EXPORT(stm32_hw_spi_init);
|
||
|
|
|
||
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||
|
|
if(spiHandle->Instance==SPI1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspInit 0 */
|
||
|
|
/* SPI1 clock enable */
|
||
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
||
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||
|
|
/**SPI1 GPIO Configuration
|
||
|
|
PA5 ------> SPI1_SCK
|
||
|
|
PA6 ------> SPI1_MISO
|
||
|
|
PA7 ------> SPI1_MOSI
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspInit 1 */
|
||
|
|
}
|
||
|
|
else if(spiHandle->Instance==SPI2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI2_MspInit 0 */
|
||
|
|
/* SPI2 clock enable */
|
||
|
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
||
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||
|
|
/**SPI2 GPIO Configuration
|
||
|
|
PB13 ------> SPI2_SCK
|
||
|
|
PB14 ------> SPI2_MISO
|
||
|
|
PB15 ------> SPI2_MOSI
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_14;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI2_MspInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(spiHandle->Instance==SPI1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**SPI1 GPIO Configuration
|
||
|
|
PA5 ------> SPI1_SCK
|
||
|
|
PA6 ------> SPI1_MISO
|
||
|
|
PA7 ------> SPI1_MOSI
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
else if(spiHandle->Instance==SPI2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI2_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**SPI2 GPIO Configuration
|
||
|
|
PB13 ------> SPI2_SCK
|
||
|
|
PB14 ------> SPI2_MISO
|
||
|
|
PB15 ------> SPI2_MOSI
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI2_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif /*RT_USING_SPI*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|