rtt-f030/bsp/nuvoton_m451/Libraries/StdDriver/inc/pdma.h

301 lines
13 KiB
C
Raw Normal View History

/**************************************************************************//**
* @file pdma.h
* @version V1.00
* $Revision: 15 $
* $Date: 15/08/11 10:26a $
* @brief M451 series PDMA driver header file
*
* @note
* Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __PDMA_H__
#define __PDMA_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup PDMA_Driver PDMA Driver
@{
*/
/** @addtogroup PDMA_EXPORTED_CONSTANTS PDMA Exported Constants
@{
*/
#define PDMA_CH_MAX 12 /*!< Specify Maximum Channels of PDMA \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Operation Mode Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_OP_STOP 0x00000000UL /*!<DMA Stop Mode \hideinitializer */
#define PDMA_OP_BASIC 0x00000001UL /*!<DMA Basic Mode \hideinitializer */
#define PDMA_OP_SCATTER 0x00000002UL /*!<DMA Scatter-gather Mode \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Data Width Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_WIDTH_8 0x00000000UL /*!<DMA Transfer Width 8-bit \hideinitializer */
#define PDMA_WIDTH_16 0x00001000UL /*!<DMA Transfer Width 16-bit \hideinitializer */
#define PDMA_WIDTH_32 0x00002000UL /*!<DMA Transfer Width 32-bit \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Address Attribute Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_SAR_INC 0x00000000UL /*!<DMA SAR increment \hideinitializer */
#define PDMA_SAR_FIX 0x00000300UL /*!<DMA SAR fix address \hideinitializer */
#define PDMA_DAR_INC 0x00000000UL /*!<DMA DAR increment \hideinitializer */
#define PDMA_DAR_FIX 0x00000C00UL /*!<DMA DAR fix address \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Burst Mode Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_REQ_SINGLE 0x00000004UL /*!<DMA Single Request \hideinitializer */
#define PDMA_REQ_BURST 0x00000000UL /*!<DMA Burst Request \hideinitializer */
#define PDMA_BURST_128 0x00000000UL /*!<DMA Burst 128 Transfers \hideinitializer */
#define PDMA_BURST_64 0x00000010UL /*!<DMA Burst 64 Transfers \hideinitializer */
#define PDMA_BURST_32 0x00000020UL /*!<DMA Burst 32 Transfers \hideinitializer */
#define PDMA_BURST_16 0x00000030UL /*!<DMA Burst 16 Transfers \hideinitializer */
#define PDMA_BURST_8 0x00000040UL /*!<DMA Burst 8 Transfers \hideinitializer */
#define PDMA_BURST_4 0x00000050UL /*!<DMA Burst 4 Transfers \hideinitializer */
#define PDMA_BURST_2 0x00000060UL /*!<DMA Burst 2 Transfers \hideinitializer */
#define PDMA_BURST_1 0x00000070UL /*!<DMA Burst 1 Transfers \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Peripheral Transfer Mode Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_SPI0_TX 0x00000001UL /*!<DMA Connect to SPI1 TX \hideinitializer */
#define PDMA_SPI1_TX 0x00000002UL /*!<DMA Connect to SPI2 TX \hideinitializer */
#define PDMA_SPI2_TX 0x00000003UL /*!<DMA Connect to SPI3 TX \hideinitializer */
#define PDMA_UART0_TX 0x00000004UL /*!<DMA Connect to UART0 TX \hideinitializer */
#define PDMA_UART1_TX 0x00000005UL /*!<DMA Connect to UART1 TX \hideinitializer */
#define PDMA_UART2_TX 0x00000006UL /*!<DMA Connect to UART2 TX \hideinitializer */
#define PDMA_UART3_TX 0x00000007UL /*!<DMA Connect to UART3 TX \hideinitializer */
#define PDMA_DAC_TX 0x00000008UL /*!<DMA Connect to DAC TX \hideinitializer */
#define PDMA_ADC_RX 0x00000009UL /*!<DMA Connect to ADC RX \hideinitializer */
#define PDMA_PWM0_P1_RX 0x0000000BUL /*!<DMA Connect to PWM0 P1 RX \hideinitializer */
#define PDMA_PWM0_P2_RX 0x0000000CUL /*!<DMA Connect to PWM0 P2 RX \hideinitializer */
#define PDMA_PWM0_P3_RX 0x0000000DUL /*!<DMA Connect to PWM0 P3 RX \hideinitializer */
#define PDMA_PWM1_P1_RX 0x0000000EUL /*!<DMA Connect to PWM1 P1 RX \hideinitializer */
#define PDMA_PWM1_P2_RX 0x0000000FUL /*!<DMA Connect to PWM1 P2 RX \hideinitializer */
#define PDMA_PWM1_P3_RX 0x00000010UL /*!<DMA Connect to PWM1 P3 RX \hideinitializer */
#define PDMA_SPI0_RX 0x00000011UL /*!<DMA Connect to SPI0 RX \hideinitializer */
#define PDMA_SPI1_RX 0x00000012UL /*!<DMA Connect to SPI1 RX \hideinitializer */
#define PDMA_SPI2_RX 0x00000013UL /*!<DMA Connect to SPI2 RX \hideinitializer */
#define PDMA_UART0_RX 0x00000014UL /*!<DMA Connect to UART0 RX \hideinitializer */
#define PDMA_UART1_RX 0x00000015UL /*!<DMA Connect to UART1 RX \hideinitializer */
#define PDMA_UART2_RX 0x00000016UL /*!<DMA Connect to UART2 RX \hideinitializer */
#define PDMA_UART3_RX 0x00000017UL /*!<DMA Connect to UART3 RX \hideinitializer */
#define PDMA_MEM 0x0000001FUL /*!<DMA Connect to Memory \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Interrupt Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define PDMA_INT_TRANS_DONE 0x00000000UL /*!<Transfer Done Interrupt \hideinitializer */
#define PDMA_INT_TEMPTY 0x00000001UL /*!<Table Empty Interrupt \hideinitializer */
#define PDMA_INT_TIMEOUT 0x00000002UL /*!<Timeout Interrupt(M45xD/M45xC Only) \hideinitializer */
/*@}*/ /* end of group PDMA_EXPORTED_CONSTANTS */
/** @addtogroup PDMA_EXPORTED_FUNCTIONS PDMA Exported Functions
@{
*/
/**
* @brief Get PDMA Interrupt Status
*
* @param[in] None
*
* @return None
*
* @details This macro gets the interrupt status.
*/
#define PDMA_GET_INT_STATUS() ((uint32_t)(PDMA->INTSTS))
/**
* @brief Get Transfer Done Interrupt Status
*
* @param[in] None
*
* @return None
*
* @details Get the transfer done Interrupt status.
*/
#define PDMA_GET_TD_STS() ((uint32_t)(PDMA->TDSTS))
/**
* @brief Clear Transfer Done Interrupt Status
*
* @param[in] u32Mask The channel mask
*
* @return None
*
* @details Clear the transfer done Interrupt status.
*/
#define PDMA_CLR_TD_FLAG(u32Mask) ((uint32_t)(PDMA->TDSTS = (u32Mask)))
/**
* @brief Get Target Abort Interrupt Status
*
* @param[in] None
*
* @return None
*
* @details Get the target abort Interrupt status.
*/
#define PDMA_GET_ABORT_STS() ((uint32_t)(PDMA->ABTSTS))
/**
* @brief Clear Target Abort Interrupt Status
*
* @param[in] u32Mask The channel mask
*
* @return None
*
* @details Clear the target abort Interrupt status.
*/
#define PDMA_CLR_ABORT_FLAG(u32Mask) ((uint32_t)(PDMA->ABTSTS = (u32Mask)))
/**
* @brief Get Scatter-Gather Table Empty Interrupt Status
*
* @param[in] None
*
* @return None
*
* @details Get the scatter-gather table empty Interrupt status.
*/
#define PDMA_GET_EMPTY_STS() ((uint32_t)(PDMA->SCATSTS))
/**
* @brief Clear Scatter-Gather Table Empty Interrupt Status
*
* @param[in] u32Mask The channel mask
*
* @return None
*
* @details Clear the scatter-gather table empty Interrupt status.
*/
#define PDMA_CLR_EMPTY_FLAG(u32Mask) ((uint32_t)(PDMA->SCATSTS = (u32Mask)))
/**
* @brief Clear Timeout Interrupt Status
*
* @param[in] u32Ch The selected channel
*
* @return None
*
* @details Clear the selected channel timeout interrupt status.
* @note This function is only supported in M45xD/M45xC.
*/
#define PDMA_CLR_TMOUT_FLAG(u32Ch) ((uint32_t)(PDMA->INTSTS = (1 << ((u32Ch) + 8))))
/**
* @brief Check Channel Status
*
* @param[in] u32Ch The selected channel
*
* @retval 0 Idle state
* @retval 1 Busy state
*
* @details Check the selected channel is busy or not.
*/
#define PDMA_IS_CH_BUSY(u32Ch) ((uint32_t)(PDMA->TRGSTS & (1 << (u32Ch)))? 1 : 0)
/**
* @brief Set Source Address
*
* @param[in] u32Ch The selected channel
* @param[in] u32Addr The selected address
*
* @return None
*
* @details This macro set the selected channel source address.
*/
#define PDMA_SET_SRC_ADDR(u32Ch, u32Addr) ((uint32_t)(PDMA->DSCT[(u32Ch)].SA = (u32Addr)))
/**
* @brief Set Destination Address
*
* @param[in] u32Ch The selected channel
* @param[in] u32Addr The selected address
*
* @return None
*
* @details This macro set the selected channel destination address.
*/
#define PDMA_SET_DST_ADDR(u32Ch, u32Addr) ((uint32_t)(PDMA->DSCT[(u32Ch)].DA = (u32Addr)))
/**
* @brief Set Transfer Count
*
* @param[in] u32Ch The selected channel
* @param[in] u32TransCount Transfer Count
*
* @return None
*
* @details This macro set the selected channel transfer count.
*/
#define PDMA_SET_TRANS_CNT(u32Ch, u32TransCount) ((uint32_t)(PDMA->DSCT[(u32Ch)].CTL=(PDMA->DSCT[(u32Ch)].CTL&~PDMA_DSCT_CTL_TXCNT_Msk)|((u32TransCount-1) << PDMA_DSCT_CTL_TXCNT_Pos)))
/**
* @brief Set Scatter-gather descriptor Address
*
* @param[in] u32Ch The selected channel
* @param[in] u32Addr The descriptor address
*
* @return None
*
* @details This macro set the selected channel scatter-gather descriptor address.
*/
#define PDMA_SET_SCATTER_DESC(u32Ch, u32Addr) ((uint32_t)(PDMA->DSCT[(u32Ch)].NEXT = (u32Addr) - (PDMA->SCATBA)))
/**
* @brief Stop the channel
*
* @param[in] u32Ch The selected channel
*
* @return None
*
* @details This macro stop the selected channel.
*/
#define PDMA_STOP(u32Ch) ((uint32_t)(PDMA->STOP = (1 << (u32Ch))))
/*---------------------------------------------------------------------------------------------------------*/
/* Define PWM functions prototype */
/*---------------------------------------------------------------------------------------------------------*/
void PDMA_Open(uint32_t u32Mask);
void PDMA_Close(void);
void PDMA_SetTransferCnt(uint32_t u32Ch, uint32_t u32Width, uint32_t u32TransCount);
void PDMA_SetTransferAddr(uint32_t u32Ch, uint32_t u32SrcAddr, uint32_t u32SrcCtrl, uint32_t u32DstAddr, uint32_t u32DstCtrl);
void PDMA_SetTransferMode(uint32_t u32Ch, uint32_t u32Peripheral, uint32_t u32ScatterEn, uint32_t u32DescAddr);
void PDMA_SetBurstType(uint32_t u32Ch, uint32_t u32BurstType, uint32_t u32BurstSize);
void PDMA_EnableTimeout(uint32_t u32Mask);
void PDMA_DisableTimeout(uint32_t u32Mask);
void PDMA_SetTimeOut(uint32_t u32Ch, uint32_t u32OnOff, uint32_t u32TimeOutCnt);
void PDMA_Trigger(uint32_t u32Ch);
void PDMA_EnableInt(uint32_t u32Ch, uint32_t u32Mask);
void PDMA_DisableInt(uint32_t u32Ch, uint32_t u32Mask);
/*@}*/ /* end of group PDMA_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group PDMA_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif //__PDMA_H__
/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/