rtt-f030/bsp/dm365/drivers/davinci_serial.c

/*
 * File      : davinci_serial.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006, RT-Thread Development Team
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Change Logs:
 * Date           Author		Notes
 * 2011-01-13     weety		first version
 */

#include <rtthread.h>
#include <rthw.h>
#include <dm36x.h>
#include <rtdevice.h>

static struct rt_serial_device davinci_serial_dev0;

static struct rt_serial_device davinci_serial_dev1;


#define LSR_DR		0x01		/* Data ready */
#define LSR_THRE	0x20		/* Xmit holding register empty */
//#define	USTAT_TXB_EMPTY		0x02   	/* tx buffer empty */
#define BPS					115200	/* serial baudrate */

typedef struct uartport
{
	volatile rt_uint32_t rbr;
	volatile rt_uint32_t ier;
	volatile rt_uint32_t fcr;
	volatile rt_uint32_t lcr;
	volatile rt_uint32_t mcr;
	volatile rt_uint32_t lsr;
	volatile rt_uint32_t msr;
	volatile rt_uint32_t scr;
	volatile rt_uint32_t dll;
	volatile rt_uint32_t dlh;
	
	volatile rt_uint32_t res[2];
	volatile rt_uint32_t pwremu_mgmt;
	volatile rt_uint32_t mdr;
}uartport;

#define thr rbr
#define iir fcr

#define UART0	((struct uartport *)DAVINCI_UART0_BASE)

#define UART1	((struct uartport *)DM365_UART1_BASE)


/**
 * This function will handle serial
 */
void rt_davinci_serial_handler(int vector, void *param)
{
	struct rt_serial_device *dev = (struct rt_serial_device *)param;
	rt_hw_serial_isr(dev, RT_SERIAL_EVENT_RX_IND);
}

/**
* UART device in RT-Thread
*/
static rt_err_t davinci_uart_configure(struct rt_serial_device *serial,
                                struct serial_configure *cfg)
{
    return RT_EOK;
}

static rt_err_t davinci_uart_control(struct rt_serial_device *serial,
                              int cmd, void *arg)
{
	uartport *uart = serial->parent.user_data;

    switch (cmd)
    {
    case RT_DEVICE_CTRL_CLR_INT:
        /* disable rx irq */
		if (uart == UART0)
			rt_hw_interrupt_mask(IRQ_UARTINT0);
		else if (uart == UART1)
			rt_hw_interrupt_mask(IRQ_UARTINT1);
        break;
    case RT_DEVICE_CTRL_SET_INT:
        /* enable rx irq */
		if (uart == UART0)
			rt_hw_interrupt_umask(IRQ_UARTINT0);
		else if (uart == UART1)
			rt_hw_interrupt_umask(IRQ_UARTINT1);
        break;
    }

    return RT_EOK;
}

static int davinci_uart_putc(struct rt_serial_device *serial, char c)
{
    rt_uint32_t level;
	uartport *uart = serial->parent.user_data;

    while (!(uart->lsr & LSR_THRE));
	uart->thr = c;

    return 1;
}

static int davinci_uart_getc(struct rt_serial_device *serial)
{
    int result;
	uartport *uart = serial->parent.user_data;

    if (uart->lsr & LSR_DR)
	{
		result = uart->rbr & 0xff;
	}
	else
	{
		result = -1;
	}

    return result;
}

static const struct rt_uart_ops davinci_uart_ops =
{
    davinci_uart_configure,
    davinci_uart_control,
    davinci_uart_putc,
    davinci_uart_getc,
};

void davinci_uart0_init(void)
{
	rt_uint32_t divisor;

	divisor = (24000000 + (115200 * (16 / 2))) / (16 * 115200);
	UART0->ier = 0;
	UART0->lcr = 0x83; //8N1
	UART0->dll = 0;
	UART0->dlh = 0;
	UART0->lcr = 0x03;
	UART0->mcr = 0x03; //RTS,CTS
	UART0->fcr = 0x07; //FIFO
	UART0->lcr = 0x83;
	UART0->dll = divisor & 0xff;
	UART0->dlh = (divisor >> 8) & 0xff;
	UART0->lcr = 0x03;
	UART0->mdr = 0; //16x over-sampling
	UART0->pwremu_mgmt = 0x6000;
	rt_hw_interrupt_install(IRQ_UARTINT0, rt_davinci_serial_handler, 
							(void *)&davinci_serial_dev0, "UART0");
	rt_hw_interrupt_mask(IRQ_UARTINT0);
	UART0->ier = 0x05;
}

void davinci_uart_gpio_init()
{
	rt_uint32_t val;

	val = davinci_readl(PINMUX3);
	val &= 0xf3ffffff; /* gio23 RS485_CTRL */
	val |= 0x60000000; /*UART1_TXD (gio25)*/
	davinci_writel(val, PINMUX3);
	val = davinci_readl(PINMUX4);
	val |= 0x0000c000; /* UART1_RXD (gio34) */
	davinci_writel(val, PINMUX4);

	val = davinci_readl(DAVINCI_GPIO_BASE + 0x10);
	val &= ~(1 << 23);
	davinci_writel(val, DAVINCI_GPIO_BASE + 0x10);
	davinci_writel((1<<23), DAVINCI_GPIO_BASE + 0x1C);
}

void davinci_uart1_init(void)
{
	rt_uint32_t divisor;
	rt_uint32_t freq;
	rt_uint32_t baudrate;
	struct clk *clk;

	davinci_uart_gpio_init();
	psc_change_state(DAVINCI_DM365_LPSC_UART1, PSC_ENABLE);
	clk = clk_get("UART1");
	freq = clk_get_rate(clk);

	baudrate = 9600;
	divisor = (freq + (baudrate * (16 / 2))) / (16 * baudrate);
	UART1->ier = 0;
	UART1->lcr = 0x87; //8N2, 0x83 8N1
	UART1->dll = 0;
	UART1->dlh = 0;
	UART1->lcr = 0x07;
	UART1->mcr = 0x03; //RTS,CTS
	UART1->fcr = 0x07; //FIFO
	UART1->lcr = 0x87;
	UART1->dll = divisor & 0xff;
	UART1->dlh = (divisor >> 8) & 0xff;
	UART1->lcr = 0x07;
	UART1->mdr = 0; //16x over-sampling
	UART1->pwremu_mgmt = 0x6000;
	
	rt_hw_interrupt_install(IRQ_UARTINT1, rt_davinci_serial_handler, 
							(void *)&davinci_serial_dev1, "UART1");
	rt_hw_interrupt_mask(IRQ_UARTINT1);
	UART1->ier = 0x05;
}


/**
 * This function will handle init uart
 */
void rt_hw_uart_init(void)
{
	davinci_serial_dev0.ops = &davinci_uart_ops;
    //davinci_serial_dev0.config = RT_SERIAL_CONFIG_DEFAULT;
	davinci_serial_dev0.config.baud_rate = BAUD_RATE_115200;
    davinci_serial_dev0.config.bit_order = BIT_ORDER_LSB;
    davinci_serial_dev0.config.data_bits = DATA_BITS_8;
    davinci_serial_dev0.config.parity = PARITY_NONE;
    davinci_serial_dev0.config.stop_bits = STOP_BITS_1;
    davinci_serial_dev0.config.invert = NRZ_NORMAL;
	davinci_serial_dev0.config.bufsz = RT_SERIAL_RB_BUFSZ;

    /* register vcom device */
    rt_hw_serial_register(&davinci_serial_dev0, "uart0",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
                          UART0);
	davinci_uart0_init();

	davinci_serial_dev1.ops = &davinci_uart_ops;
    //davinci_serial_dev1.config = RT_SERIAL_CONFIG_DEFAULT;
	davinci_serial_dev1.config.baud_rate = BAUD_RATE_115200;
    davinci_serial_dev1.config.bit_order = BIT_ORDER_LSB;
    davinci_serial_dev1.config.data_bits = DATA_BITS_8;
    davinci_serial_dev1.config.parity = PARITY_NONE;
    davinci_serial_dev1.config.stop_bits = STOP_BITS_1;
    davinci_serial_dev1.config.invert = NRZ_NORMAL;
	davinci_serial_dev1.config.bufsz = RT_SERIAL_RB_BUFSZ;

    /* register vcom device */
    rt_hw_serial_register(&davinci_serial_dev1, "uart1",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
                          UART1);
	davinci_uart1_init();

}