rtt-f030/bsp/fh8620/drivers/ssi.h

135 lines
3.2 KiB
C
Raw Normal View History

/*
* This file is part of FH8620 BSP for RT-Thread distribution.
*
* Copyright (c) 2016 Shanghai Fullhan Microelectronics Co., Ltd.
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Visit http://www.fullhan.com to get contact with Fullhan.
*
* Change Logs:
* Date Author Notes
*/
#ifndef SSI_H_
#define SSI_H_
#include "Libraries/inc/fh_driverlib.h"
#include <drivers/spi.h>
#include <rtdevice.h>
#include "fh_dma.h"
#define SPI_PRIV(drv) ( (struct fh_spi_obj)(drv->priv) )
#define FH_SPI_SLAVE_MAX_NO 2
struct spi_controller;
//platform use below
struct spi_slave_platform_data{
rt_uint32_t cs_pin;
#define ACTIVE_LOW 1
#define ACTIVE_HIGH 2
rt_uint32_t actice_level;
};
struct spi_control_platform_data{
rt_uint32_t id;
rt_uint32_t irq;
rt_uint32_t base;
rt_uint32_t max_hz;
rt_uint32_t slave_no;
rt_uint32_t clk_in;
//handshake no...
rt_uint32_t rx_hs_no;
rt_uint32_t tx_hs_no;
char *dma_name;
//isr will be the default...
#define USE_ISR_TRANSFER 0
#define USE_DMA_TRANSFER 1
rt_uint32_t transfer_mode;
struct spi_controller *control;
struct spi_slave_platform_data plat_slave[FH_SPI_SLAVE_MAX_NO];
};
struct spi_controller;
//driver use below.......
struct spi_slave_info
{
struct rt_spi_device spi_device;
struct spi_controller *control;
struct spi_slave_platform_data plat_slave;
rt_uint32_t id;
//spi control will use to find all the slave info..
struct spi_slave_info *next;
};
struct spi_dma
{
char *dma_name;
#define DMA_BIND_OK 0
#define DMA_BIND_ERROR 1
rt_uint32_t dma_flag;
//bind to the dma dev..
rt_uint32_t rx_hs;
rt_uint32_t tx_hs;
rt_uint8_t *rx_dummy_buff;
rt_uint8_t *tx_dummy_buff;
struct rt_dma_device *dma_dev;
struct dma_transfer tx_trans;
struct dma_transfer rx_trans;
struct spi_controller *control;
};
struct spi_controller
{
rt_uint32_t id;
rt_uint32_t irq;
rt_uint32_t base;
rt_uint32_t max_hz;
rt_uint32_t slave_no;
rt_uint32_t clk_in;
//bind to the platform data....
struct spi_control_platform_data *plat_data;
//rt_uint32_t dma_xfer_flag;
#define XFER_USE_ISR 0
#define XFER_USE_DMA 1
rt_uint32_t xfer_mode;
struct spi_dma dma;
rt_uint32_t dma_complete_times;
struct rt_spi_bus spi_bus;
struct spi_slave_info *spi_slave;
struct rt_spi_message* current_message;
struct rt_completion transfer_completion;
struct rt_semaphore xfer_lock;
struct fh_spi_obj obj;
rt_uint32_t received_len;
rt_uint32_t transfered_len;
void* priv;
};
void rt_hw_spi_init(void);
#endif /* SPI_H_ */