rtt-f030/bsp/mini4020/drivers/dm9161.c

/*
 * File      : dm9161.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2009 - 2012, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author       Notes
 */

#include <rtthread.h>
#include <netif/ethernetif.h>

#include "dm9161.h"
#include <sep4020.h>
#include "mii.h"

#define SPEED_10    10
#define SPEED_100   100
#define SPEED_1000  1000
/* Duplex, half or full. */
#define DUPLEX_HALF		0x00
#define DUPLEX_FULL		0x01

/*
 * Davicom dm9161EP driver
 *
 * IRQ_LAN connects to EINT7(GPF7)
 * nLAN_CS connects to nGCS4
 */

/* #define dm9161_DEBUG		1 */
#if DM9161_DEBUG
#define DM9161_TRACE	rt_kprintf
#else
#define DM9161_TRACE(...)
#endif

/*
 * dm9161 interrupt line is connected to PF7
 */
//--------------------------------------------------------

#define DM9161_PHY          0x40    /* PHY address 0x01 */

#define MAX_ADDR_LEN 6
enum DM9161_PHY_mode
{
    DM9161_10MHD = 0, DM9161_100MHD = 1,
    DM9161_10MFD = 4, DM9161_100MFD = 5,
    DM9161_AUTO  = 8, DM9161_1M_HPNA = 0x10
};

enum DM9161_TYPE
{
    TYPE_DM9161,
};

struct rt_dm9161_eth
{
    /* inherit from ethernet device */
    struct eth_device parent;

    enum DM9161_TYPE type;
	enum DM9161_PHY_mode mode;

    rt_uint8_t imr_all;
	rt_uint8_t phy_addr;

	rt_uint32_t tx_index;

    rt_uint8_t packet_cnt;                  /* packet I or II */
    rt_uint16_t queue_packet_len;           /* queued packet (packet II) */

    /* interface address info. */
    rt_uint8_t  dev_addr[MAX_ADDR_LEN];		/* hw address	*/
};
static struct rt_dm9161_eth dm9161_device;
static struct rt_semaphore sem_ack, sem_lock;

void rt_dm9161_isr(int irqno, void *param);

static void udelay(unsigned long ns)
{
	unsigned long i;

	while (ns--)
	{
		i = 100;
		while (i--);
	}
}

static __inline unsigned long sep_emac_read(unsigned int reg)
{
	void __iomem *emac_base = (void __iomem *)reg;

	return read_reg(emac_base);
}
 
/*
* Write to a EMAC register.
*/
static __inline void sep_emac_write(unsigned int reg, unsigned long value)
{
	void __iomem *emac_base = (void __iomem *)reg;
 
	write_reg(emac_base,value);
}

  
/* ........................... PHY INTERFACE ........................... */
/*         CAN DO MAC CONFIGRATION
* Enable the MDIO bit in MAC control register
* When not called from an interrupt-handler, access to the PHY must be
*  protected by a spinlock.
*/
static void enable_mdi(void)           //need think more
{
	unsigned long ctl;

	ctl = sep_emac_read(MAC_CTRL);
	sep_emac_write(MAC_CTRL, ctl&(~0x3));    /* enable management port */

	return;
}

/*          CANNOT DO MAC CONFIGRATION
* Disable the MDIO bit in the MAC control register
*/
static void disable_mdi(void)
{
	unsigned long ctl;
  
	ctl = sep_emac_read(MAC_CTRL);
	sep_emac_write(MAC_CTRL, ctl|(0x3));    /* disable management port */

	return;
}

/*
* Wait until the PHY operation is complete.
*/
static __inline void sep_phy_wait(void) 
{
	unsigned long timeout = 2;

	while ((sep_emac_read(MAC_MII_STATUS) & 0x2)) 
	{
		timeout--;
		if (!timeout) 
		{
			EOUT("sep_ether: MDIO timeout\n");
			break;
		}		
	}

	return;
}
 
/*
* Write value to the a PHY register
* Note: MDI interface is assumed to already have been enabled.
*/
static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value)
{
	unsigned short mii_txdata;
	
	mii_txdata = value;
	sep_emac_write(MAC_MII_ADDRESS,(unsigned long)(address<<8) | phy_addr);
	sep_emac_write(MAC_MII_TXDATA ,mii_txdata);
	sep_emac_write(MAC_MII_CMD ,0x4);
	udelay(40);

	sep_phy_wait();

	return;	
}
 
/*
* Read value stored in a PHY register.
* Note: MDI interface is assumed to already have been enabled.
*/
static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value)
{
	unsigned short mii_rxdata;
//	unsigned long mii_status;
	
	sep_emac_write(MAC_MII_ADDRESS,(unsigned long)(address<<8) | phy_addr);
	sep_emac_write(MAC_MII_CMD ,0x2);
	udelay(40);
	sep_phy_wait();
		
	mii_rxdata = sep_emac_read(MAC_MII_RXDATA);
	*value =  mii_rxdata;

	return;
}

/* interrupt service routine */
void rt_dm9161_isr(int irqno, void *param)
{
	unsigned long intstatus;
	rt_uint32_t address;

 	mask_irq(INTSRC_MAC);
	intstatus = sep_emac_read(MAC_INTSRC);

	sep_emac_write(MAC_INTSRC,intstatus);
	
	/*Receive complete*/
	if(intstatus & 0x04)
	{
		eth_device_ready(&(dm9161_device.parent));
	}
	/*Receive error*/
	else if(intstatus & 0x08)
	{
		rt_kprintf("Receive error\n");
	}
	/*Transmit complete*/
	else if(intstatus & 0x03)
	{
			if(dm9161_device.tx_index == 0)
				address = (MAC_TX_BD +(MAX_TX_DESCR-2)*8);
			else if(dm9161_device.tx_index == 1) 
				address = (MAC_TX_BD +(MAX_TX_DESCR-1)*8);
			else 
				address = (MAC_TX_BD + dm9161_device.tx_index*8-16);
			//printk("free tx skb 0x%x in inter!!\n",lp->txBuffIndex);	
			sep_emac_write(address,0x0);
	}
	else if (intstatus & 0x10)
	{
		rt_kprintf("ROVER ERROR\n");
	}

	while(intstatus)
	{
		sep_emac_write(MAC_INTSRC,intstatus);
		intstatus = sep_emac_read(MAC_INTSRC);
	}

	unmask_irq(INTSRC_MAC);
}

static rt_err_t update_mac_address()
{
	rt_uint32_t lo,hi;
	hi = sep_emac_read(MAC_ADDR1);
	lo = sep_emac_read(MAC_ADDR0);
	DBOUT("Before MAC: hi=%x lo=%x\n",hi,lo);

	sep_emac_write(MAC_ADDR0,(dm9161_device.dev_addr[2] << 24) | (dm9161_device.dev_addr[3] << 16) | (dm9161_device.dev_addr[4] << 8) | (dm9161_device.dev_addr[5]));
	sep_emac_write(MAC_ADDR1,dm9161_device.dev_addr[1]|(dm9161_device.dev_addr[0]<<8));

	hi = sep_emac_read(MAC_ADDR1);
	lo = sep_emac_read(MAC_ADDR0);
	DBOUT("After MAC: hi=%x lo=%x\n",hi,lo);

	return RT_EOK;
}

static int mii_link_ok(unsigned long phy_id)
{
	/* first, a dummy read, needed to latch some MII phys */
	unsigned int value;

	read_phy(phy_id, MII_BMSR,&value);
	if (value & BMSR_LSTATUS)
		return 1;

	return 0;
}

static void update_link_speed(unsigned short phy_addr)
{
	unsigned int bmsr, bmcr, lpa, mac_cfg;
	unsigned int speed, duplex;

	if (!mii_link_ok(phy_addr))
	{
		EOUT("Link Down\n");
		//goto result;
	}

	read_phy(phy_addr,MII_BMSR,&bmsr);
	read_phy(phy_addr,MII_BMCR,&bmcr);

	if (bmcr & BMCR_ANENABLE)                /* AutoNegotiation is enabled */
	{                         
		if (!(bmsr & BMSR_ANEGCOMPLETE))              /* Do nothing - another interrupt generated when negotiation complete */
			goto result;              

		read_phy(phy_addr, MII_LPA, &lpa);
		
		if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) 
			speed = SPEED_100;
		else 
			speed = SPEED_10;
			
		if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) 
			duplex = DUPLEX_FULL;
		else 
			duplex = DUPLEX_HALF;
	} 
	else 
	{
		speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
		duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
	}
 
	/* Update the MAC */
	mac_cfg = sep_emac_read(MAC_CTRL);
	if (speed == SPEED_100) 
	{
		mac_cfg |= 0x800;			/* set speed 100 M */
		//bmcr &=(~0x2000);
		//write_phy(lp->phy_address, MII_BMCR, bmcr); //<2F><>dm9161<36><31><EFBFBD>ٶ<EFBFBD><D9B6><EFBFBD>Ϊ10M
		if (duplex == DUPLEX_FULL)              /* 100 Full Duplex */
			mac_cfg |= 0x400;
		else                                    /* 100 Half Duplex */
			mac_cfg &= (~0x400);
	} 
	else 
	{
		mac_cfg &= (~0x800);             /* set speed 10 M */
		
		if (duplex == DUPLEX_FULL)              /* 10 Full Duplex */
			mac_cfg |= 0x400;
		else                                /* 10 Half Duplex */
			mac_cfg &= (~0x400);
	}
	
	sep_emac_write(MAC_CTRL, mac_cfg);
	rt_kprintf("Link now %i M-%s\n",  speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
			
result:
	mac_cfg = sep_emac_read(MAC_CTRL);
	DBOUT("After mac_cfg=%d\n",mac_cfg);
	
	return;
}

static rt_err_t rt_dm9161_open(rt_device_t dev, rt_uint16_t oflag);
/* RT-Thread Device Interface */
/* initialize the interface */
static rt_err_t rt_dm9161_init(rt_device_t dev)
{
	unsigned int phyid1, phyid2;
	int detected = -1;
	unsigned long phy_id;
	unsigned short phy_address = 0;

	while ((detected != 0) && (phy_address < 32)) 
	{
		/* Read the PHY ID registers */
		enable_mdi();
		read_phy(phy_address, MII_PHYSID1, &phyid1);
		read_phy(phy_address, MII_PHYSID2, &phyid2);
	
		disable_mdi();

		phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
		switch (phy_id) 
		{
			case MII_DM9161_ID:		/* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
			case MII_DM9161A_ID:		/* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
			case MII_RTL8201_ID:		/* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
			case MII_BCM5221_ID:		/* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
			case MII_DP83847_ID:		/* National Semiconductor DP83847:  */
			case MII_AC101L_ID:		/* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
			case MII_KS8721_ID:		/* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
			{
				enable_mdi();
				#warning SHOULD SET MAC ADDR
				//get_mac_address(dev);		/* Get ethernet address and store it in dev->dev_addr */
				update_mac_address();	/* Program ethernet address into MAC */
			
				//<2F>ù<EFBFBD>ϣ<EFBFBD>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD>Ƚϵ<C8BD>ǰȺ<C7B0><C8BA><EFBFBD><EFBFBD>ַ<EFBFBD><D6B7>ȫ˫<C8AB><CBAB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>CRCУ<43>飬<EFBFBD><E9A3AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD>֡<EFBFBD><D6A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
				sep_emac_write(MAC_CTRL, 0xa413);
				#warning SHOULD DETERMIN LINK SPEED
				update_link_speed(phy_address);
				dm9161_device.phy_addr = phy_address;
				disable_mdi();
				break;
			}
				
		}

		phy_address++;
	}

	rt_dm9161_open(dev,0);

	return RT_EOK;
}

/* ................................ MAC ................................ */

/*
 * Initialize and start the Receiver and Transmit subsystems
 */
static void sepether_start(void)
{
	int i;
	unsigned int tempaddr;
 
	sep_emac_write(MAC_TXBD_NUM,MAX_TX_DESCR);

	//<2F><>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD>ͺͽ<CDBA><CDBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
	for (i = 0; i < MAX_TX_DESCR; i++)
	{
		tempaddr=(MAC_TX_BD+i*8);
		sep_emac_write(tempaddr,0);
		tempaddr=(MAC_TX_BD+i*8+4);
		sep_emac_write(tempaddr,0);
	}
	for (i = 0; i < MAX_RX_DESCR; i++)
	{
		tempaddr=(MAC_TX_BD + MAX_TX_DESCR*8+i*8);
		sep_emac_write(tempaddr,0);
		tempaddr=(MAC_TX_BD + MAX_TX_DESCR*8+i*8+4);
		sep_emac_write(tempaddr,0);
	}

	for (i = 0; i < MAX_RX_DESCR; i++) 
	{
		tempaddr=(MAC_TX_BD + MAX_TX_DESCR*8+i*8);
		sep_emac_write(tempaddr,0xc000);
		tempaddr=(MAC_TX_BD + MAX_TX_DESCR*8+i*8+4);
		sep_emac_write(tempaddr,ESRAM_BASE+ MAX_TX_DESCR*0x600+i*0x600);
	}

	/* Set the Wrap bit on the last descriptor */
	tempaddr=(MAC_TX_BD + MAX_TX_DESCR*8+i*8-8);
	sep_emac_write(tempaddr,0xe000);

	for (i = 0; i < MAX_TX_DESCR; i++) 
	{
		tempaddr=(MAC_TX_BD+i*8);
		sep_emac_write(tempaddr,0x0);
		tempaddr=(MAC_TX_BD+i*8+4);
		sep_emac_write(tempaddr,ESRAM_BASE+i*0x600);
	}
	
	return;
}

static rt_err_t rt_dm9161_open(rt_device_t dev, rt_uint16_t oflag)
{
	unsigned int dsintr;

	enable_mdi();
	mask_irq(28);

	sep_emac_write(MAC_INTMASK,0x0);  //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD>

	sepether_start();

	/* Enable PHY interrupt */
	*(volatile unsigned long*)GPIO_PORTA_DIR |= 0x0080 ;          //1 stands for in
	*(volatile unsigned long*)GPIO_PORTA_SEL |= 0x0080 ;       //for common use
	*(volatile unsigned long*)GPIO_PORTA_INCTL |= 0x0080;      //<2F>ж<EFBFBD><D0B6><EFBFBD><EFBFBD>뷽ʽ
	*(volatile unsigned long*)GPIO_PORTA_INTRCTL |= (0x3UL<<14);    //<2F>ж<EFBFBD><D0B6><EFBFBD><EFBFBD><EFBFBD>Ϊ<EFBFBD>͵<EFBFBD>ƽ<EFBFBD>ⷢ
	*(volatile unsigned long*)GPIO_PORTA_INTRCLR |= 0x0080;    //<2F><><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD>
	*(volatile unsigned long*)GPIO_PORTA_INTRCLR = 0x0000;          //<2F><><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD>

	rt_hw_interrupt_install(INTSRC_MAC, rt_dm9161_isr, RT_NULL, "EMAC");
	enable_irq(INTSRC_EXINT7);


	read_phy(dm9161_device.phy_addr, MII_DSINTR_REG, &dsintr);
	dsintr = dsintr & ~0xf00;		/* clear bits 8..11 */
	write_phy(dm9161_device.phy_addr, MII_DSINTR_REG, dsintr);

	update_link_speed(dm9161_device.phy_addr);
	
	
	/************************************************************************************/
	/* Enable MAC interrupts */
	sep_emac_write(MAC_INTMASK,0xff);  //open<65>ж<EFBFBD>
	sep_emac_write(MAC_INTSRC,0xff);   //clear all mac irq
	unmask_irq(28);
	disable_mdi();
	
	rt_kprintf("SEP4020 ethernet interface open!\n\r");

	return RT_EOK;
}

static rt_err_t rt_dm9161_close(rt_device_t dev)
{
	rt_kprintf("SEP4020 ethernet interface close!\n\r");
	
	/* Disable Receiver and Transmitter */
	disable_mdi();
	#warning disable ether;
	
//	INT_ENABLE(28);
	/* Disable PHY interrupt */
//	disable_phyirq(dev);
	
	/* Disable MAC interrupts */
	sep_emac_write(MAC_INTMASK,0);  //<2F><><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD>

//	INT_DISABLE(28);
	
	return RT_EOK;
}

static rt_size_t rt_dm9161_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
	rt_set_errno(-RT_ENOSYS);

	return 0;
}

static rt_size_t rt_dm9161_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
	rt_set_errno(-RT_ENOSYS);

	return 0;
}

static rt_err_t rt_dm9161_control(rt_device_t dev, int cmd, void *args)
{
	return RT_EOK;
}

/* ethernet device interface */
/* transmit packet. */
rt_err_t rt_dm9161_tx( rt_device_t dev, struct pbuf* p)
{
	rt_uint8_t i;
	rt_uint32_t length = 0;
	struct pbuf *q;
	unsigned long  address;
	unsigned long tmp_tx_bd;

	/* lock DM9000 device */
//	rt_sem_take(&sem_lock, RT_WAITING_FOREVER);

	/* disable dm9000a interrupt */
	#warning SHOULD DISABLE INTEERUPT?

	/*Search for available BD*/
	for (i = 0;i<MAX_TX_DESCR;)
	{
		address	= MAC_TX_BD + i*8;
		tmp_tx_bd = sep_emac_read(address);
		if (!(tmp_tx_bd & 0x8000))
		{
			if (i == (MAX_TX_DESCR-1)) 
				i = 0;
			else 
				i = i+1;
			break;
		}
		if (i == MAX_TX_DESCR-1) 
			i = 0;
		else 
			i++;
	}
	
	q = p;
	while (q)
	{
		rt_memcpy((u8_t*)(ESRAM_BASE + i*0x600 + length),(u8_t*)q->payload,q->len);
		length += q->len;
		q = q->next;
	}

	#warning SHOULD NOTICE IT'S LENGTH

	length = length << 16;

	if (i == MAX_TX_DESCR - 1)
		length |= 0xb800;
	else 
		length |= 0x9800;

	address = (MAC_TX_BD + i*8);
	dm9161_device.tx_index = i;
	sep_emac_write(address,length);

	//wait for tranfer complete
	while(!(sep_emac_read(address)&0x8000));

	/* unlock DM9000 device */
//    rt_sem_release(&sem_lock);

	/* wait ack */
//    rt_sem_take(&sem_ack, RT_WAITING_FOREVER);

	return RT_EOK;
}

/* reception packet. */
struct pbuf *rt_dm9161_rx(rt_device_t dev)
{
	unsigned int temp_rx_bd,address;
	rt_uint32_t i = 0;
	rt_uint32_t length;
	unsigned char *p_recv;
	struct pbuf* p = RT_NULL;

	/* lock DM9000 device */
	rt_sem_take(&sem_lock, RT_WAITING_FOREVER);

	while (1)
	{
	
		address = MAC_TX_BD +  (MAX_TX_DESCR + i) * 8;
		temp_rx_bd = sep_emac_read(address);
	
		if (!(temp_rx_bd & 0x8000))
		{
			length = temp_rx_bd;
			length = length >> 16;

			p_recv = (unsigned char *)(ESRAM_BASE + (MAX_TX_DESCR + i) * 0x600);
			p = pbuf_alloc(PBUF_LINK,length,PBUF_RAM);
			if (p != RT_NULL)
			{
				struct pbuf *q;
				rt_int32_t len;

				for (q = p; q != RT_NULL; q = q->next)
				{
					rt_memcpy((rt_uint8_t *)(q->payload),p_recv,q->len);
				}
			}
			else
			{
				 rt_kprintf("Droping %d packet \n",length);
			}

			if(i == (MAX_RX_DESCR-1))
			{
				sep_emac_write(address,0xe000);
				i = 0;
			}
			else
			{
				sep_emac_write(address,0xc000);
				i++;
			}
		}
		else
			break;
	}

	rt_sem_release(&sem_lock);

	return p;
}

void rt_hw_dm9161_init()
{
	rt_sem_init(&sem_ack, "tx_ack", 1, RT_IPC_FLAG_FIFO);
	rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);

	dm9161_device.type  = TYPE_DM9161;
	dm9161_device.mode	= DM9161_AUTO;
	dm9161_device.packet_cnt = 0;
	dm9161_device.queue_packet_len = 0;

	/*
	 * SRAM Tx/Rx pointer automatically return to start address,
	 * Packet Transmitted, Packet Received
	 */
	#warning NOTICE:
	//dm9161_device.imr_all = IMR_PAR | IMR_PTM | IMR_PRM;

	dm9161_device.dev_addr[0] = 0x01;
	dm9161_device.dev_addr[1] = 0x60;
	dm9161_device.dev_addr[2] = 0x6E;
	dm9161_device.dev_addr[3] = 0x11;
	dm9161_device.dev_addr[4] = 0x02;
	dm9161_device.dev_addr[5] = 0x0F;

	dm9161_device.parent.parent.init       = rt_dm9161_init;
	dm9161_device.parent.parent.open       = rt_dm9161_open;
	dm9161_device.parent.parent.close      = rt_dm9161_close;
	dm9161_device.parent.parent.read       = rt_dm9161_read;
	dm9161_device.parent.parent.write      = rt_dm9161_write;
	dm9161_device.parent.parent.control    = rt_dm9161_control;
	dm9161_device.parent.parent.user_data  = RT_NULL;

	dm9161_device.parent.eth_rx     = rt_dm9161_rx;
	dm9161_device.parent.eth_tx     = rt_dm9161_tx;

	eth_device_init(&(dm9161_device.parent), "e0");

	/* instal interrupt */
	#warning TODO
	//rt_hw_interrupt_install(INTEINT4_7, rt_dm9161_isr, RT_NULL);
	//rt_hw_interrupt_umask(INTEINT4_7);
}

void dm9161a(void)
{
}

#ifdef RT_USING_FINSH
#include <finsh.h>
FINSH_FUNCTION_EXPORT(dm9161a, dm9161a register dump);
#endif