rtt-f030/bsp/imx6ul/platform/cpu/ccm_pll.h

/*
 * Copyright (c) 2012, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _CCM_PLL_H_
#define _CCM_PLL_H_

#include "sdk_types.h"

//! @addtogroup diag_clocks
//! @{

////////////////////////////////////////////////////////////////////////////////
// Definitions
////////////////////////////////////////////////////////////////////////////////

#define CLK_SRC_32K         32768

//! @brief Create a clock gate bit mask value.
//! @param x 0..15, for CG0 to CG15
#define CG(x) (3 << (x*2))

//! @brief Constants for CCM CCGR register fields.
enum _clock_gate_constants
{
    CLOCK_ON = 0x3, //!< Clock always on in both run and stop modes.
    CLOCK_ON_RUN = 0x1, //!< Clock on only in run mode.
    CLOCK_OFF = 0x0 //!< Clocked gated off.
};

//! @brief Low power mdoes.
typedef enum _lp_modes {
    RUN_MODE,
    WAIT_MODE,
    STOP_MODE,
} lp_modes_t;

//! @brief Main clock sources.
typedef enum _main_clocks {
    CPU_CLK,
    AXI_CLK,
    MMDC_CH0_AXI_CLK,
    AHB_CLK,
    IPG_CLK,
    IPG_PER_CLK,
    MMDC_CH1_AXI_CLK,
} main_clocks_t;

//! @brief Peripheral clocks.
typedef enum _peri_clocks {
    UART1_MODULE_CLK,
    UART2_MODULE_CLK,
    UART3_MODULE_CLK,
    UART4_MODULE_CLK,
    UART5_MODULE_CLK,
    UART6_MODULE_CLK,
    UART7_MODULE_CLK,
    UART8_MODULE_CLK,
    SSI1_BAUD,
    SSI2_BAUD,
    CSI_BAUD,
    MSTICK1_CLK,
    MSTICK2_CLK,
    RAWNAND_CLK,
    USB_CLK,
    VPU_CLK,
    SPI_CLK,
    CAN_CLK
} peri_clocks_t;

//! @brief Available PLLs.
typedef enum plls {
    PLL1,
    PLL2,
    PLL3,
    PLL4,
    PLL5,
} plls_t;

extern const uint32_t PLL1_OUTPUT;
extern const uint32_t PLL2_OUTPUT[];
extern const uint32_t PLL3_OUTPUT[];
extern const uint32_t PLL4_OUTPUT;
extern const uint32_t PLL5_OUTPUT;

////////////////////////////////////////////////////////////////////////////////
// API
////////////////////////////////////////////////////////////////////////////////

#if defined(__cplusplus)
extern "C" {
#endif

//! @brief Set/unset clock gating for a peripheral.
//! @param   base_address configure clock gating for that module from the base address.
//! @param   gating_mode clock gating mode: CLOCK_ON or CLOCK_OFF.
void clock_gating_config(uint32_t base_address, uint32_t gating_mode);

//! @brief Returns the frequency of a clock in megahertz.
uint32_t get_main_clock(main_clocks_t clk);

//! @brief Returns the frequency of a clock in megahertz.
uint32_t get_peri_clock(peri_clocks_t clk);

//! @brief Inits clock sources.
void ccm_init(void);

//! @brief Prepare and enter in a low power mode.
//! @param lp_mode low power mode : WAIT_MODE or STOP_MODE.
void ccm_enter_low_power(lp_modes_t lp_mode);

//! @brief Mask/unmask an interrupt source that can wake up the processor when in a
//! low power mode.
//!
//! @param   irq_id ID of the interrupt to mask/unmask.
//! @param   doEnable Pass true to unmask the source ID.
void ccm_set_lpm_wakeup_source(uint32_t irq_id, bool doEnable);

#if defined(__cplusplus)
}
#endif

//! @}

#endif
////////////////////////////////////////////////////////////////////////////////
// EOF
////////////////////////////////////////////////////////////////////////////////