rtt-f030/bsp/lpc824/Libraries/peri_driver/pmu/pmu_8xx.h

238 lines
8.1 KiB
C
Raw Normal View History

2017-07-28 21:34:18 +08:00
/*
* @brief LPC8xx PMU chip driver
*
* @note
* Copyright(C) NXP Semiconductors, 2012
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __PMU_8XX_H_
#define __PMU_8XX_H_
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup PMU_8XX CHIP: LPC8xx PMU driver
* @ingroup CHIP_8XX_Drivers
* @{
*/
/**
* @brief LPC8xx Power Management Unit register block structure
*/
typedef struct {
__IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */
__IO uint32_t GPREG[4]; /*!< Offset: 0x004 General purpose Registers 0..3 (R/W) */
__IO uint32_t DPDCTRL; /*!< Offset: 0x014 Deep power-down control register (R/W) */
} LPC_PMU_T;
/* Reserved bits masks for registers */
#define PMU_PCON_RESERVED ((0xf<<4)|(0x6<<8)|0xfffff000)
#define PMU_DPDCTRL_RESERVED (~0xf)
/**
* @brief LPC8xx low power mode type definitions
*/
typedef enum CHIP_PMU_MCUPOWER {
PMU_MCU_SLEEP = 0, /*!< Sleep mode */
PMU_MCU_DEEP_SLEEP, /*!< Deep Sleep mode */
PMU_MCU_POWER_DOWN, /*!< Power down mode */
PMU_MCU_DEEP_PWRDOWN /*!< Deep power down mode */
} CHIP_PMU_MCUPOWER_T;
/**
* PMU PCON register bit fields & masks
*/
#define PMU_PCON_PM_SLEEP (0x0) /*!< ARM WFI enter sleep mode */
#define PMU_PCON_PM_DEEPSLEEP (0x1) /*!< ARM WFI enter Deep-sleep mode */
#define PMU_PCON_PM_POWERDOWN (0x2) /*!< ARM WFI enter Power-down mode */
#define PMU_PCON_PM_DEEPPOWERDOWN (0x3) /*!< ARM WFI enter Deep Power-down mode */
#define PMU_PCON_NODPD (1 << 3) /*!< Disable deep power-down mode */
#define PMU_PCON_SLEEPFLAG (1 << 8) /*!< Sleep mode flag */
#define PMU_PCON_DPDFLAG (1 << 11) /*!< Deep power-down flag */
/**
* PMU DPDCTRL register bit fields & masks
*/
#define PMU_DPDCTRL_WAKEUPPHYS (1 << 0) /** Enable wake-up pin hysteresis */
#define PMU_DPDCTRL_WAKEPAD (1 << 1) /** Disable the Wake-up */
#define PMU_DPDCTRL_LPOSCEN (1 << 2) /** Enable the low-power oscillator (10 khz self wk) */
#define PMU_DPDCTRL_LPOSCDPDEN (1 << 3) /** Enable the low-power oscillator in deep power-down*/
/**
* @brief Write a value to a GPREG register
* @param pPMU : Pointer to PMU register block
* @param regIndex : Register index to write to, must be 0..3
* @param value : Value to write
* @return None
*/
STATIC INLINE void Chip_PMU_WriteGPREG(LPC_PMU_T *pPMU, uint8_t regIndex, uint32_t value)
{
pPMU->GPREG[regIndex] = value;
}
/**
* @brief Read a value to a GPREG register
* @param pPMU : Pointer to PMU register block
* @param regIndex : Register index to read from, must be 0..3
* @return Value read from the GPREG register
*/
STATIC INLINE uint32_t Chip_PMU_ReadGPREG(LPC_PMU_T *pPMU, uint8_t regIndex)
{
return pPMU->GPREG[regIndex];
}
/**
* @brief Enter MCU Sleep mode
* @param pPMU : Pointer to PMU register block
* @return None
* @note The sleep mode affects the ARM Cortex-M0+ core only. Peripherals
* and memories are active.
*/
void Chip_PMU_SleepState(LPC_PMU_T *pPMU);
/**
* @brief Enter MCU Deep Sleep mode
* @param pPMU : Pointer to PMU register block
* @return None
* @note In Deep-sleep mode, the peripherals receive no internal clocks.
* The flash is in stand-by mode. The SRAM memory and all peripheral registers
* as well as the processor maintain their internal states. The WWDT, WKT,
* and BOD can remain active to wake up the system on an interrupt.
*/
void Chip_PMU_DeepSleepState(LPC_PMU_T *pPMU);
/**
* @brief Enter MCU Power down mode
* @param pPMU : Pointer to PMU register block
* @return None
* @note In Power-down mode, the peripherals receive no internal clocks.
* The internal SRAM memory and all peripheral registers as well as the
* processor maintain their internal states. The flash memory is powered
* down. The WWDT, WKT, and BOD can remain active to wake up the system
* on an interrupt.
*/
void Chip_PMU_PowerDownState(LPC_PMU_T *pPMU);
/**
* @brief Enter MCU Deep Power down mode
* @param pPMU : Pointer to PMU register block
* @return None
* @note For maximal power savings, the entire system is shut down
* except for the general purpose registers in the PMU and the self
* wake-up timer. Only the general purpose registers in the PMU maintain
* their internal states. The part can wake up on a pulse on the WAKEUP
* pin or when the self wake-up timer times out. On wake-up, the part
* reboots.
*/
void Chip_PMU_DeepPowerDownState(LPC_PMU_T *pPMU);
/**
* @brief Place the MCU in a low power state
* @param pPMU : Pointer to PMU register block
* @param SleepMode : Sleep mode
* @return None
*/
void Chip_PMU_Sleep(LPC_PMU_T *pPMU, CHIP_PMU_MCUPOWER_T SleepMode);
/**
* @brief Disables deep power-down mode
* @param pPMU : Pointer to PMU register block
* @return None
* @note Calling this functions prevents entry to Deep power-down
* mode. Once set, this can only be cleared by power-on reset.
*/
STATIC INLINE void Chip_PMU_DisableDeepPowerDown(LPC_PMU_T *pPMU)
{
pPMU->PCON = PMU_PCON_NODPD | (pPMU->PCON & ~PMU_PCON_RESERVED);
}
/**
* @brief Returns sleep/power-down flags
* @param pPMU : Pointer to PMU register block
* @return Or'ed values of PMU_PCON_SLEEPFLAG and PMU_PCON_DPDFLAG
* @note These indicate that the PMU is setup for entry into a low
* power state on the next WFI() instruction.
*/
STATIC INLINE uint32_t Chip_PMU_GetSleepFlags(LPC_PMU_T *pPMU)
{
return (pPMU->PCON & (PMU_PCON_SLEEPFLAG | PMU_PCON_DPDFLAG));
}
/**
* @brief Clears sleep/power-down flags
* @param pPMU : Pointer to PMU register block
* @param flags : Or'ed value of PMU_PCON_SLEEPFLAG and PMU_PCON_DPDFLAG
* @return Nothing
* @note Use this function to clear a low power state prior to calling
* WFI().
*/
STATIC INLINE void Chip_PMU_ClearSleepFlags(LPC_PMU_T *pPMU, uint32_t flags)
{
pPMU->PCON |= (flags & (~PMU_PCON_RESERVED));
}
/**
* @brief Sets deep power-down functions
* @param pPMU : Pointer to PMU register block
* @param flags : Or'ed value of PMU_DPDCTRL_* values
* @return Nothing
* @note Some of these functions may need to be set prior to going
* into a low power mode. Note that some calls to this function enable
* functions while others disable it based on the PMU_DPDCTRL_*
* definitions.
*/
STATIC INLINE void Chip_PMU_SetPowerDownControl(LPC_PMU_T *pPMU, uint32_t flags)
{
pPMU->DPDCTRL = flags | (pPMU->DPDCTRL & ~PMU_DPDCTRL_RESERVED);
}
/**
* @brief Cleats deep power-down functions
* @param pPMU : Pointer to PMU register block
* @param flags : Or'ed value of PMU_DPDCTRL_* values
* @return Nothing
* @note Some of these functions may need to be cleared prior to going
* into a low power mode. Note that some calls to this function enable
* functions while others disable it based on the PMU_DPDCTRL_*
* definitions.
*/
STATIC INLINE void Chip_PMU_ClearPowerDownControl(LPC_PMU_T *pPMU, uint32_t flags)
{
pPMU->DPDCTRL &= ~(flags | PMU_DPDCTRL_RESERVED);
}
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __PMU_8XX_H_ */