2013-01-08 22:40:58 +08:00
|
|
|
/**************************************************************************//**
|
|
|
|
|
* @file
|
|
|
|
|
* @brief Operational Amplifier (OPAMP) peripheral API
|
|
|
|
|
* @author Energy Micro AS
|
|
|
|
|
* @version 3.0.0
|
|
|
|
|
******************************************************************************
|
|
|
|
|
* @section License
|
|
|
|
|
* <b>(C) Copyright 2012 Energy Micro AS, http://www.energymicro.com</b>
|
|
|
|
|
*******************************************************************************
|
|
|
|
|
*
|
|
|
|
|
* Permission is granted to anyone to use this software for any purpose,
|
|
|
|
|
* including commercial applications, and to alter it and redistribute it
|
|
|
|
|
* freely, subject to the following restrictions:
|
|
|
|
|
*
|
|
|
|
|
* 1. The origin of this software must not be misrepresented; you must not
|
|
|
|
|
* claim that you wrote the original software.
|
|
|
|
|
* 2. Altered source versions must be plainly marked as such, and must not be
|
|
|
|
|
* misrepresented as being the original software.
|
|
|
|
|
* 3. This notice may not be removed or altered from any source distribution.
|
|
|
|
|
*
|
|
|
|
|
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
|
|
|
|
|
* obligation to support this Software. Energy Micro AS is providing the
|
|
|
|
|
* Software "AS IS", with no express or implied warranties of any kind,
|
|
|
|
|
* including, but not limited to, any implied warranties of merchantability
|
|
|
|
|
* or fitness for any particular purpose or warranties against infringement
|
|
|
|
|
* of any proprietary rights of a third party.
|
|
|
|
|
*
|
|
|
|
|
* Energy Micro AS will not be liable for any consequential, incidental, or
|
|
|
|
|
* special damages, or any other relief, or for any claim by any third party,
|
|
|
|
|
* arising from your use of this Software.
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
#ifndef __EM_OPAMP_H
|
|
|
|
|
#define __EM_OPAMP_H
|
|
|
|
|
|
|
|
|
|
#include "em_part.h"
|
|
|
|
|
#if defined(OPAMP_PRESENT) && (OPAMP_COUNT == 1)
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
extern "C" {
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#include <stdint.h>
|
|
|
|
|
#include <stdbool.h>
|
|
|
|
|
#include "em_dac.h"
|
|
|
|
|
|
|
|
|
|
/***************************************************************************//**
|
|
|
|
|
* @addtogroup EM_Library
|
|
|
|
|
* @{
|
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
|
|
/***************************************************************************//**
|
|
|
|
|
* @addtogroup OPAMP
|
|
|
|
|
* @{
|
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
|
|
/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
|
|
|
|
|
|
|
|
|
|
/** Validation of DAC OPA number for assert statements. */
|
|
|
|
|
#define DAC_OPA_VALID(opa) ((opa) <= OPA2)
|
|
|
|
|
|
|
|
|
|
/** @endcond */
|
|
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
|
******************************** ENUMS ************************************
|
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
|
|
/** OPAMP selector values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
OPA0 = 0, /**< Select OPA0. */
|
|
|
|
|
OPA1 = 1, /**< Select OPA1. */
|
|
|
|
|
OPA2 = 2 /**< Select OPA2. */
|
|
|
|
|
} OPAMP_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** OPAMP negative terminal input selection values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
opaNegSelDisable = DAC_OPA0MUX_NEGSEL_DISABLE, /**< Input disabled. */
|
|
|
|
|
opaNegSelUnityGain = DAC_OPA0MUX_NEGSEL_UG, /**< Unity gain feedback path. */
|
|
|
|
|
opaNegSelResTap = DAC_OPA0MUX_NEGSEL_OPATAP, /**< Feedback resistor ladder tap. */
|
|
|
|
|
opaNegSelNegPad = DAC_OPA0MUX_NEGSEL_NEGPAD /**< Negative pad as input. */
|
|
|
|
|
} OPAMP_NegSel_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** OPAMP positive terminal input selection values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
opaPosSelDisable = DAC_OPA0MUX_POSSEL_DISABLE, /**< Input disabled. */
|
|
|
|
|
opaPosSelDac = DAC_OPA0MUX_POSSEL_DAC, /**< DAC as input (not OPA2). */
|
|
|
|
|
opaPosSelPosPad = DAC_OPA0MUX_POSSEL_POSPAD, /**< Positive pad as input. */
|
|
|
|
|
opaPosSelOpaIn = DAC_OPA0MUX_POSSEL_OPA0INP, /**< Input from OPAx. */
|
|
|
|
|
opaPosSelResTapOpa0 = DAC_OPA0MUX_POSSEL_OPATAP /**< Feedback resistor ladder tap from OPA0. */
|
|
|
|
|
} OPAMP_PosSel_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** OPAMP output terminal selection values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
opaOutModeDisable = DAC_OPA0MUX_OUTMODE_DISABLE, /**< OPA output disabled. */
|
|
|
|
|
opaOutModeMain = DAC_OPA0MUX_OUTMODE_MAIN, /**< Main output to pin enabled. */
|
|
|
|
|
opaOutModeAlt = DAC_OPA0MUX_OUTMODE_ALT, /**< Alternate output(s) enabled (not OPA2). */
|
|
|
|
|
opaOutModeAll = DAC_OPA0MUX_OUTMODE_ALL /**< Both main and alternate enabled (not OPA2). */
|
|
|
|
|
} OPAMP_OutMode_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** OPAMP gain values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
opaResSelDefault = DAC_OPA0MUX_RESSEL_DEFAULT, /**< Default value when resistor ladder is unused. */
|
|
|
|
|
opaResSelR2eq0_33R1 = DAC_OPA0MUX_RESSEL_RES0, /**< R2 = 0.33 * R1 */
|
|
|
|
|
opaResSelR2eqR1 = DAC_OPA0MUX_RESSEL_RES1, /**< R2 = R1 */
|
|
|
|
|
opaResSelR1eq1_67R1 = DAC_OPA0MUX_RESSEL_RES2, /**< R2 = 1.67 R1 */
|
|
|
|
|
opaResSelR2eq2R1 = DAC_OPA0MUX_RESSEL_RES3, /**< R2 = 2 * R1 */
|
|
|
|
|
opaResSelR2eq3R1 = DAC_OPA0MUX_RESSEL_RES4, /**< R2 = 3 * R1 */
|
|
|
|
|
opaResSelR2eq4_33R1 = DAC_OPA0MUX_RESSEL_RES5, /**< R2 = 4.33 * R1 */
|
|
|
|
|
opaResSelR2eq7R1 = DAC_OPA0MUX_RESSEL_RES6, /**< R2 = 7 * R1 */
|
|
|
|
|
opaResSelR2eq15R1 = DAC_OPA0MUX_RESSEL_RES7 /**< R2 = 15 * R1 */
|
|
|
|
|
} OPAMP_ResSel_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** OPAMP resistor ladder input selector values. */
|
|
|
|
|
typedef enum
|
|
|
|
|
{
|
|
|
|
|
opaResInMuxDisable = DAC_OPA0MUX_RESINMUX_DISABLE, /**< Resistor ladder disabled. */
|
|
|
|
|
opaResInMuxOpaIn = DAC_OPA0MUX_RESINMUX_OPA0INP, /**< Input from OPAx. */
|
|
|
|
|
opaResInMuxNegPad = DAC_OPA0MUX_RESINMUX_NEGPAD, /**< Input from negative pad. */
|
|
|
|
|
opaResInMuxPosPad = DAC_OPA0MUX_RESINMUX_POSPAD, /**< Input from positive pad. */
|
|
|
|
|
opaResInMuxVss = DAC_OPA0MUX_RESINMUX_VSS /**< Input connected to Vss. */
|
|
|
|
|
} OPAMP_ResInMux_TypeDef;
|
|
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
|
******************************* STRUCTS ***********************************
|
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
|
|
/** OPAMP init structure. */
|
|
|
|
|
typedef struct
|
|
|
|
|
{
|
|
|
|
|
OPAMP_NegSel_TypeDef negSel; /**< Select input source for negative terminal. */
|
|
|
|
|
OPAMP_PosSel_TypeDef posSel; /**< Select input source for positive terminal. */
|
|
|
|
|
OPAMP_OutMode_TypeDef outMode; /**< Output terminal connection. */
|
|
|
|
|
OPAMP_ResSel_TypeDef resSel; /**< Select R2/R1 resistor ratio. */
|
|
|
|
|
OPAMP_ResInMux_TypeDef resInMux; /**< Select input source for resistor ladder. */
|
|
|
|
|
uint32_t outPen; /**< Select alternate output terminal connections. */
|
|
|
|
|
uint32_t bias; /**< Set OPAMP bias current. */
|
|
|
|
|
bool halfBias; /**< Divide OPAMP bias current by 2. */
|
|
|
|
|
bool lpfPosPadDisable; /**< Disable low pass filter on positive pad. */
|
|
|
|
|
bool lpfNegPadDisable; /**< Disable low pass filter on negative pad. */
|
|
|
|
|
bool nextOut; /**< Enable NEXTOUT signal source. */
|
|
|
|
|
bool npEn; /**< Enable positive pad. */
|
|
|
|
|
bool ppEn; /**< Enable negative pad. */
|
|
|
|
|
bool shortInputs; /**< Short OPAMP input terminals. */
|
|
|
|
|
bool hcmDisable; /**< Disable input rail-to-rail capability. */
|
|
|
|
|
bool defaultOffset; /**< Use factory calibrated opamp offset value. */
|
|
|
|
|
uint32_t offset; /**< Opamp offset value when @ref defaultOffset is false.*/
|
|
|
|
|
} OPAMP_Init_TypeDef;
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0/1 in unity gain voltage follower mode. */
|
|
|
|
|
#define OPA_INIT_UNITY_GAIN \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelUnityGain, /* Unity gain. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelDefault, /* Resistor ladder is not used. */ \
|
|
|
|
|
opaResInMuxDisable, /* Resistor ladder disabled. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in unity gain voltage follower mode. */
|
|
|
|
|
#define OPA_INIT_UNITY_GAIN_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelUnityGain, /* Unity gain. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelDefault, /* Resistor ladder is not used. */ \
|
|
|
|
|
opaResInMuxDisable, /* Resistor ladder disabled. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Alternate output 0 enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0/1 in non-inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_NON_INVERTING \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eq0_33R1, /* R2 = 1/3 R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in non-inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_NON_INVERTING_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eq0_33R1, /* R2 = 1/3 R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Alternate output 0 enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0/1 in inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_INVERTING \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal input. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_INVERTING_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Alternate output 0 enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal input. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0 in cascaded non-inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_NON_INVERTING_OPA0 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelR2eq0_33R1, /* R2 = 1/3 R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA1). */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA1 in cascaded non-inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_NON_INVERTING_OPA1 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelOpaIn, /* Pos input from OPA0 output. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelR2eq0_33R1, /* R2 = 1/3 R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA2). */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* Pos pad disabled. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in cascaded non-inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_NON_INVERTING_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelOpaIn, /* Pos input from OPA1 output. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eq0_33R1, /* R2 = 1/3 R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Alternate output 0 enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* Pos pad disabled. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0 in cascaded inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_INVERTING_OPA0 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA1). */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal input. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA1 in cascaded inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_INVERTING_OPA1 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxOpaIn, /* Resistor ladder input from OPA0. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA2). */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in cascaded inverting amplifier mode. */
|
|
|
|
|
#define OPA_INIT_CASCADED_INVERTING_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxOpaIn, /* Resistor ladder input from OPA1. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Alternate output 0 enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0 in two-opamp differential driver mode. */
|
|
|
|
|
#define OPA_INIT_DIFF_DRIVER_OPA0 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelUnityGain, /* Unity gain. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelDefault, /* Resistor ladder is not used. */ \
|
|
|
|
|
opaResInMuxDisable, /* Resistor ladder disabled. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA1). */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA1 in two-opamp differential driver mode. */
|
|
|
|
|
#define OPA_INIT_DIFF_DRIVER_OPA1 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Neg input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxOpaIn, /* Resistor ladder input from OPA0. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal ground. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA0 in three-opamp differential receiver mode. */
|
|
|
|
|
#define OPA_INIT_DIFF_RECEIVER_OPA0 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelUnityGain, /* Unity gain. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxNegPad, /* Resistor ladder input from neg pad. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA2). */ \
|
|
|
|
|
true, /* Neg pad enabled, used as signal ground. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA1 in three-opamp differential receiver mode. */
|
|
|
|
|
#define OPA_INIT_DIFF_RECEIVER_OPA1 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelUnityGain, /* Unity gain. */ \
|
|
|
|
|
opaPosSelPosPad, /* Pos input from pad. */ \
|
|
|
|
|
opaOutModeAll, /* Both main and alternate outputs. */ \
|
|
|
|
|
opaResSelDefault, /* Resistor ladder is not used. */ \
|
|
|
|
|
opaResInMuxDisable, /* Disable resistor ladder. */ \
|
|
|
|
|
0, /* No alternate outputs enabled. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
true, /* Pass output to next stage (OPA2). */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
true, /* Pos pad enabled, used as signal input. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/** Configuration of OPA2 in three-opamp differential receiver mode. */
|
|
|
|
|
#define OPA_INIT_DIFF_RECEIVER_OPA2 \
|
|
|
|
|
{ \
|
|
|
|
|
opaNegSelResTap, /* Input from resistor ladder tap. */ \
|
|
|
|
|
opaPosSelResTapOpa0, /* Input from OPA0 resistor ladder tap. */ \
|
|
|
|
|
opaOutModeMain, /* Main output enabled. */ \
|
|
|
|
|
opaResSelR2eqR1, /* R2 = R1 */ \
|
|
|
|
|
opaResInMuxOpaIn, /* Resistor ladder input from OPA1. */ \
|
|
|
|
|
DAC_OPA0MUX_OUTPEN_OUT0, /* Enable alternate output 0. */ \
|
|
|
|
|
_DAC_BIASPROG_BIASPROG_DEFAULT, /* Default bias setting. */ \
|
|
|
|
|
_DAC_BIASPROG_HALFBIAS_DEFAULT, /* Default half-bias setting. */ \
|
|
|
|
|
false, /* No low pass filter on pos pad. */ \
|
|
|
|
|
false, /* No low pass filter on neg pad. */ \
|
|
|
|
|
false, /* No nextout output enabled. */ \
|
|
|
|
|
false, /* Neg pad disabled. */ \
|
|
|
|
|
false, /* Pos pad disabled. */ \
|
|
|
|
|
false, /* No shorting of inputs. */ \
|
|
|
|
|
false, /* Rail-to-rail input enabled. */ \
|
|
|
|
|
true, /* Use factory calibrated opamp offset. */ \
|
|
|
|
|
0 /* Opamp offset value (not used). */ \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
|
***************************** PROTOTYPES **********************************
|
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
|
|
void OPAMP_Disable(DAC_TypeDef *dac, OPAMP_TypeDef opa);
|
|
|
|
|
void OPAMP_Enable(DAC_TypeDef *dac, OPAMP_TypeDef opa, const OPAMP_Init_TypeDef *init);
|
|
|
|
|
|
|
|
|
|
/** @} (end addtogroup OPAMP) */
|
|
|
|
|
/** @} (end addtogroup EM_Library) */
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* defined( OPAMP_PRESENT ) && ( OPAMP_COUNT == 1 ) */
|
|
|
|
|
#endif /* __EM_DAC_H */
|
