chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/apollo2/libraries/drivers/regs/am_reg_ioslave.h

515 lines
25 KiB
C
Raw Normal View History

Add bsp apollo2
2017-09-15 18:10:51 +08:00
//*****************************************************************************
//
// am_reg_ioslave.h
//! @file
//!
//! @brief Register macros for the IOSLAVE module
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_REG_IOSLAVE_H
#define AM_REG_IOSLAVE_H
//*****************************************************************************
//
// Instance finder. (1 instance(s) available)
//
//*****************************************************************************
#define AM_REG_IOSLAVE_NUM_MODULES 1
#define AM_REG_IOSLAVEn(n) \
(REG_IOSLAVE_BASEADDR + 0x00000000 * n)
//*****************************************************************************
//
// Register offsets.
//
//*****************************************************************************
#define AM_REG_IOSLAVE_FIFOPTR_O 0x00000100
#define AM_REG_IOSLAVE_FIFOCFG_O 0x00000104
#define AM_REG_IOSLAVE_FIFOTHR_O 0x00000108
#define AM_REG_IOSLAVE_FUPD_O 0x0000010C
#define AM_REG_IOSLAVE_FIFOCTR_O 0x00000110
#define AM_REG_IOSLAVE_FIFOINC_O 0x00000114
#define AM_REG_IOSLAVE_CFG_O 0x00000118
#define AM_REG_IOSLAVE_PRENC_O 0x0000011C
#define AM_REG_IOSLAVE_IOINTCTL_O 0x00000120
#define AM_REG_IOSLAVE_GENADD_O 0x00000124
#define AM_REG_IOSLAVE_INTEN_O 0x00000200
#define AM_REG_IOSLAVE_INTSTAT_O 0x00000204
#define AM_REG_IOSLAVE_INTCLR_O 0x00000208
#define AM_REG_IOSLAVE_INTSET_O 0x0000020C
#define AM_REG_IOSLAVE_REGACCINTEN_O 0x00000210
#define AM_REG_IOSLAVE_REGACCINTSTAT_O 0x00000214
#define AM_REG_IOSLAVE_REGACCINTCLR_O 0x00000218
#define AM_REG_IOSLAVE_REGACCINTSET_O 0x0000021C
//*****************************************************************************
//
// IOSLAVE_INTEN - IO Slave Interrupts: Enable
//
//*****************************************************************************
// Transfer complete interrupt, write to register space.
#define AM_REG_IOSLAVE_INTEN_XCMPWR_S 9
#define AM_REG_IOSLAVE_INTEN_XCMPWR_M 0x00000200
#define AM_REG_IOSLAVE_INTEN_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200)
// Transfer complete interrupt, write to FIFO space.
#define AM_REG_IOSLAVE_INTEN_XCMPWF_S 8
#define AM_REG_IOSLAVE_INTEN_XCMPWF_M 0x00000100
#define AM_REG_IOSLAVE_INTEN_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100)
// Transfer complete interrupt, read from register space.
#define AM_REG_IOSLAVE_INTEN_XCMPRR_S 7
#define AM_REG_IOSLAVE_INTEN_XCMPRR_M 0x00000080
#define AM_REG_IOSLAVE_INTEN_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080)
// Transfer complete interrupt, read from FIFO space.
#define AM_REG_IOSLAVE_INTEN_XCMPRF_S 6
#define AM_REG_IOSLAVE_INTEN_XCMPRF_M 0x00000040
#define AM_REG_IOSLAVE_INTEN_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040)
// I2C Interrupt Write interrupt.
#define AM_REG_IOSLAVE_INTEN_IOINTW_S 5
#define AM_REG_IOSLAVE_INTEN_IOINTW_M 0x00000020
#define AM_REG_IOSLAVE_INTEN_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020)
// I2C General Address interrupt.
#define AM_REG_IOSLAVE_INTEN_GENAD_S 4
#define AM_REG_IOSLAVE_INTEN_GENAD_M 0x00000010
#define AM_REG_IOSLAVE_INTEN_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010)
// FIFO Read Error interrupt.
#define AM_REG_IOSLAVE_INTEN_FRDERR_S 3
#define AM_REG_IOSLAVE_INTEN_FRDERR_M 0x00000008
#define AM_REG_IOSLAVE_INTEN_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008)
// FIFO Underflow interrupt.
#define AM_REG_IOSLAVE_INTEN_FUNDFL_S 2
#define AM_REG_IOSLAVE_INTEN_FUNDFL_M 0x00000004
#define AM_REG_IOSLAVE_INTEN_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
// FIFO Overflow interrupt.
#define AM_REG_IOSLAVE_INTEN_FOVFL_S 1
#define AM_REG_IOSLAVE_INTEN_FOVFL_M 0x00000002
#define AM_REG_IOSLAVE_INTEN_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002)
// FIFO Size interrupt.
#define AM_REG_IOSLAVE_INTEN_FSIZE_S 0
#define AM_REG_IOSLAVE_INTEN_FSIZE_M 0x00000001
#define AM_REG_IOSLAVE_INTEN_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// IOSLAVE_INTSTAT - IO Slave Interrupts: Status
//
//*****************************************************************************
// Transfer complete interrupt, write to register space.
#define AM_REG_IOSLAVE_INTSTAT_XCMPWR_S 9
#define AM_REG_IOSLAVE_INTSTAT_XCMPWR_M 0x00000200
#define AM_REG_IOSLAVE_INTSTAT_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200)
// Transfer complete interrupt, write to FIFO space.
#define AM_REG_IOSLAVE_INTSTAT_XCMPWF_S 8
#define AM_REG_IOSLAVE_INTSTAT_XCMPWF_M 0x00000100
#define AM_REG_IOSLAVE_INTSTAT_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100)
// Transfer complete interrupt, read from register space.
#define AM_REG_IOSLAVE_INTSTAT_XCMPRR_S 7
#define AM_REG_IOSLAVE_INTSTAT_XCMPRR_M 0x00000080
#define AM_REG_IOSLAVE_INTSTAT_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080)
// Transfer complete interrupt, read from FIFO space.
#define AM_REG_IOSLAVE_INTSTAT_XCMPRF_S 6
#define AM_REG_IOSLAVE_INTSTAT_XCMPRF_M 0x00000040
#define AM_REG_IOSLAVE_INTSTAT_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040)
// I2C Interrupt Write interrupt.
#define AM_REG_IOSLAVE_INTSTAT_IOINTW_S 5
#define AM_REG_IOSLAVE_INTSTAT_IOINTW_M 0x00000020
#define AM_REG_IOSLAVE_INTSTAT_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020)
// I2C General Address interrupt.
#define AM_REG_IOSLAVE_INTSTAT_GENAD_S 4
#define AM_REG_IOSLAVE_INTSTAT_GENAD_M 0x00000010
#define AM_REG_IOSLAVE_INTSTAT_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010)
// FIFO Read Error interrupt.
#define AM_REG_IOSLAVE_INTSTAT_FRDERR_S 3
#define AM_REG_IOSLAVE_INTSTAT_FRDERR_M 0x00000008
#define AM_REG_IOSLAVE_INTSTAT_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008)
// FIFO Underflow interrupt.
#define AM_REG_IOSLAVE_INTSTAT_FUNDFL_S 2
#define AM_REG_IOSLAVE_INTSTAT_FUNDFL_M 0x00000004
#define AM_REG_IOSLAVE_INTSTAT_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
// FIFO Overflow interrupt.
#define AM_REG_IOSLAVE_INTSTAT_FOVFL_S 1
#define AM_REG_IOSLAVE_INTSTAT_FOVFL_M 0x00000002
#define AM_REG_IOSLAVE_INTSTAT_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002)
// FIFO Size interrupt.
#define AM_REG_IOSLAVE_INTSTAT_FSIZE_S 0
#define AM_REG_IOSLAVE_INTSTAT_FSIZE_M 0x00000001
#define AM_REG_IOSLAVE_INTSTAT_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// IOSLAVE_INTCLR - IO Slave Interrupts: Clear
//
//*****************************************************************************
// Transfer complete interrupt, write to register space.
#define AM_REG_IOSLAVE_INTCLR_XCMPWR_S 9
#define AM_REG_IOSLAVE_INTCLR_XCMPWR_M 0x00000200
#define AM_REG_IOSLAVE_INTCLR_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200)
// Transfer complete interrupt, write to FIFO space.
#define AM_REG_IOSLAVE_INTCLR_XCMPWF_S 8
#define AM_REG_IOSLAVE_INTCLR_XCMPWF_M 0x00000100
#define AM_REG_IOSLAVE_INTCLR_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100)
// Transfer complete interrupt, read from register space.
#define AM_REG_IOSLAVE_INTCLR_XCMPRR_S 7
#define AM_REG_IOSLAVE_INTCLR_XCMPRR_M 0x00000080
#define AM_REG_IOSLAVE_INTCLR_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080)
// Transfer complete interrupt, read from FIFO space.
#define AM_REG_IOSLAVE_INTCLR_XCMPRF_S 6
#define AM_REG_IOSLAVE_INTCLR_XCMPRF_M 0x00000040
#define AM_REG_IOSLAVE_INTCLR_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040)
// I2C Interrupt Write interrupt.
#define AM_REG_IOSLAVE_INTCLR_IOINTW_S 5
#define AM_REG_IOSLAVE_INTCLR_IOINTW_M 0x00000020
#define AM_REG_IOSLAVE_INTCLR_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020)
// I2C General Address interrupt.
#define AM_REG_IOSLAVE_INTCLR_GENAD_S 4
#define AM_REG_IOSLAVE_INTCLR_GENAD_M 0x00000010
#define AM_REG_IOSLAVE_INTCLR_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010)
// FIFO Read Error interrupt.
#define AM_REG_IOSLAVE_INTCLR_FRDERR_S 3
#define AM_REG_IOSLAVE_INTCLR_FRDERR_M 0x00000008
#define AM_REG_IOSLAVE_INTCLR_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008)
// FIFO Underflow interrupt.
#define AM_REG_IOSLAVE_INTCLR_FUNDFL_S 2
#define AM_REG_IOSLAVE_INTCLR_FUNDFL_M 0x00000004
#define AM_REG_IOSLAVE_INTCLR_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
// FIFO Overflow interrupt.
#define AM_REG_IOSLAVE_INTCLR_FOVFL_S 1
#define AM_REG_IOSLAVE_INTCLR_FOVFL_M 0x00000002
#define AM_REG_IOSLAVE_INTCLR_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002)
// FIFO Size interrupt.
#define AM_REG_IOSLAVE_INTCLR_FSIZE_S 0
#define AM_REG_IOSLAVE_INTCLR_FSIZE_M 0x00000001
#define AM_REG_IOSLAVE_INTCLR_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// IOSLAVE_INTSET - IO Slave Interrupts: Set
//
//*****************************************************************************
// Transfer complete interrupt, write to register space.
#define AM_REG_IOSLAVE_INTSET_XCMPWR_S 9
#define AM_REG_IOSLAVE_INTSET_XCMPWR_M 0x00000200
#define AM_REG_IOSLAVE_INTSET_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200)
// Transfer complete interrupt, write to FIFO space.
#define AM_REG_IOSLAVE_INTSET_XCMPWF_S 8
#define AM_REG_IOSLAVE_INTSET_XCMPWF_M 0x00000100
#define AM_REG_IOSLAVE_INTSET_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100)
// Transfer complete interrupt, read from register space.
#define AM_REG_IOSLAVE_INTSET_XCMPRR_S 7
#define AM_REG_IOSLAVE_INTSET_XCMPRR_M 0x00000080
#define AM_REG_IOSLAVE_INTSET_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080)
// Transfer complete interrupt, read from FIFO space.
#define AM_REG_IOSLAVE_INTSET_XCMPRF_S 6
#define AM_REG_IOSLAVE_INTSET_XCMPRF_M 0x00000040
#define AM_REG_IOSLAVE_INTSET_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040)
// I2C Interrupt Write interrupt.
#define AM_REG_IOSLAVE_INTSET_IOINTW_S 5
#define AM_REG_IOSLAVE_INTSET_IOINTW_M 0x00000020
#define AM_REG_IOSLAVE_INTSET_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020)
// I2C General Address interrupt.
#define AM_REG_IOSLAVE_INTSET_GENAD_S 4
#define AM_REG_IOSLAVE_INTSET_GENAD_M 0x00000010
#define AM_REG_IOSLAVE_INTSET_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010)
// FIFO Read Error interrupt.
#define AM_REG_IOSLAVE_INTSET_FRDERR_S 3
#define AM_REG_IOSLAVE_INTSET_FRDERR_M 0x00000008
#define AM_REG_IOSLAVE_INTSET_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008)
// FIFO Underflow interrupt.
#define AM_REG_IOSLAVE_INTSET_FUNDFL_S 2
#define AM_REG_IOSLAVE_INTSET_FUNDFL_M 0x00000004
#define AM_REG_IOSLAVE_INTSET_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
// FIFO Overflow interrupt.
#define AM_REG_IOSLAVE_INTSET_FOVFL_S 1
#define AM_REG_IOSLAVE_INTSET_FOVFL_M 0x00000002
#define AM_REG_IOSLAVE_INTSET_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002)
// FIFO Size interrupt.
#define AM_REG_IOSLAVE_INTSET_FSIZE_S 0
#define AM_REG_IOSLAVE_INTSET_FSIZE_M 0x00000001
#define AM_REG_IOSLAVE_INTSET_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// IOSLAVE_REGACCINTEN - Register Access Interrupts: Enable
//
//*****************************************************************************
// Register access interrupts.
#define AM_REG_IOSLAVE_REGACCINTEN_REGACC_S 0
#define AM_REG_IOSLAVE_REGACCINTEN_REGACC_M 0xFFFFFFFF
#define AM_REG_IOSLAVE_REGACCINTEN_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// IOSLAVE_REGACCINTSTAT - Register Access Interrupts: Status
//
//*****************************************************************************
// Register access interrupts.
#define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC_S 0
#define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC_M 0xFFFFFFFF
#define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// IOSLAVE_REGACCINTCLR - Register Access Interrupts: Clear
//
//*****************************************************************************
// Register access interrupts.
#define AM_REG_IOSLAVE_REGACCINTCLR_REGACC_S 0
#define AM_REG_IOSLAVE_REGACCINTCLR_REGACC_M 0xFFFFFFFF
#define AM_REG_IOSLAVE_REGACCINTCLR_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// IOSLAVE_REGACCINTSET - Register Access Interrupts: Set
//
//*****************************************************************************
// Register access interrupts.
#define AM_REG_IOSLAVE_REGACCINTSET_REGACC_S 0
#define AM_REG_IOSLAVE_REGACCINTSET_REGACC_M 0xFFFFFFFF
#define AM_REG_IOSLAVE_REGACCINTSET_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// IOSLAVE_FIFOPTR - Current FIFO Pointer
//
//*****************************************************************************
// The number of bytes currently in the hardware FIFO.
#define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S 8
#define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_M 0x0000FF00
#define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ(n) (((uint32_t)(n) << 8) & 0x0000FF00)
// Current FIFO pointer.
#define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_S 0
#define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_M 0x000000FF
#define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// IOSLAVE_FIFOCFG - FIFO Configuration
//
//*****************************************************************************
// Defines the read-only area. The IO Slave read-only area is situated in LRAM
// at (ROBASE*8) to (FIFOOBASE*8-1)
#define AM_REG_IOSLAVE_FIFOCFG_ROBASE_S 24
#define AM_REG_IOSLAVE_FIFOCFG_ROBASE_M 0x3F000000
#define AM_REG_IOSLAVE_FIFOCFG_ROBASE(n) (((uint32_t)(n) << 24) & 0x3F000000)
// These bits hold the maximum FIFO address in 8 byte segments. It is also the
// beginning of the RAM area of the LRAM. Note that no RAM area is configured
// if FIFOMAX is set to 0x1F.
#define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX_S 8
#define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX_M 0x00003F00
#define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX(n) (((uint32_t)(n) << 8) & 0x00003F00)
// These bits hold the base address of the I/O FIFO in 8 byte segments. The IO
// Slave FIFO is situated in LRAM at (FIFOBASE*8) to (FIFOMAX*8-1).
#define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE_S 0
#define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE_M 0x0000001F
#define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE(n) (((uint32_t)(n) << 0) & 0x0000001F)
//*****************************************************************************
//
// IOSLAVE_FIFOTHR - FIFO Threshold Configuration
//
//*****************************************************************************
// FIFO size interrupt threshold.
#define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR_S 0
#define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR_M 0x000000FF
#define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// IOSLAVE_FUPD - FIFO Update Status
//
//*****************************************************************************
// This bitfield indicates an IO read is active.
#define AM_REG_IOSLAVE_FUPD_IOREAD_S 1
#define AM_REG_IOSLAVE_FUPD_IOREAD_M 0x00000002
#define AM_REG_IOSLAVE_FUPD_IOREAD(n) (((uint32_t)(n) << 1) & 0x00000002)
// This bit indicates that a FIFO update is underway.
#define AM_REG_IOSLAVE_FUPD_FIFOUPD_S 0
#define AM_REG_IOSLAVE_FUPD_FIFOUPD_M 0x00000001
#define AM_REG_IOSLAVE_FUPD_FIFOUPD(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// IOSLAVE_FIFOCTR - Overall FIFO Counter
//
//*****************************************************************************
// Virtual FIFO byte count
#define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR_S 0
#define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR_M 0x000003FF
#define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR(n) (((uint32_t)(n) << 0) & 0x000003FF)
//*****************************************************************************
//
// IOSLAVE_FIFOINC - Overall FIFO Counter Increment
//
//*****************************************************************************
// Increment the Overall FIFO Counter by this value on a write
#define AM_REG_IOSLAVE_FIFOINC_FIFOINC_S 0
#define AM_REG_IOSLAVE_FIFOINC_FIFOINC_M 0x000003FF
#define AM_REG_IOSLAVE_FIFOINC_FIFOINC(n) (((uint32_t)(n) << 0) & 0x000003FF)
//*****************************************************************************
//
// IOSLAVE_CFG - I/O Slave Configuration
//
//*****************************************************************************
// IOSLAVE interface enable.
#define AM_REG_IOSLAVE_CFG_IFCEN_S 31
#define AM_REG_IOSLAVE_CFG_IFCEN_M 0x80000000
#define AM_REG_IOSLAVE_CFG_IFCEN(n) (((uint32_t)(n) << 31) & 0x80000000)
#define AM_REG_IOSLAVE_CFG_IFCEN_DIS 0x00000000
#define AM_REG_IOSLAVE_CFG_IFCEN_EN 0x80000000
// 7-bit or 10-bit I2C device address.
#define AM_REG_IOSLAVE_CFG_I2CADDR_S 8
#define AM_REG_IOSLAVE_CFG_I2CADDR_M 0x000FFF00
#define AM_REG_IOSLAVE_CFG_I2CADDR(n) (((uint32_t)(n) << 8) & 0x000FFF00)
// This bit holds the cycle to initiate an I/O RAM read.
#define AM_REG_IOSLAVE_CFG_STARTRD_S 4
#define AM_REG_IOSLAVE_CFG_STARTRD_M 0x00000010
#define AM_REG_IOSLAVE_CFG_STARTRD(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_IOSLAVE_CFG_STARTRD_LATE 0x00000000
#define AM_REG_IOSLAVE_CFG_STARTRD_EARLY 0x00000010
// This bit selects the transfer bit ordering.
#define AM_REG_IOSLAVE_CFG_LSB_S 2
#define AM_REG_IOSLAVE_CFG_LSB_M 0x00000004
#define AM_REG_IOSLAVE_CFG_LSB(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_IOSLAVE_CFG_LSB_MSB_FIRST 0x00000000
#define AM_REG_IOSLAVE_CFG_LSB_LSB_FIRST 0x00000004
// This bit selects SPI polarity.
#define AM_REG_IOSLAVE_CFG_SPOL_S 1
#define AM_REG_IOSLAVE_CFG_SPOL_M 0x00000002
#define AM_REG_IOSLAVE_CFG_SPOL(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_0_3 0x00000000
#define AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_1_2 0x00000002
// This bit selects the I/O interface.
#define AM_REG_IOSLAVE_CFG_IFCSEL_S 0
#define AM_REG_IOSLAVE_CFG_IFCSEL_M 0x00000001
#define AM_REG_IOSLAVE_CFG_IFCSEL(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_IOSLAVE_CFG_IFCSEL_I2C 0x00000000
#define AM_REG_IOSLAVE_CFG_IFCSEL_SPI 0x00000001
//*****************************************************************************
//
// IOSLAVE_PRENC - I/O Slave Interrupt Priority Encode
//
//*****************************************************************************
// These bits hold the priority encode of the REGACC interrupts.
#define AM_REG_IOSLAVE_PRENC_PRENC_S 0
#define AM_REG_IOSLAVE_PRENC_PRENC_M 0x0000001F
#define AM_REG_IOSLAVE_PRENC_PRENC(n) (((uint32_t)(n) << 0) & 0x0000001F)
//*****************************************************************************
//
// IOSLAVE_IOINTCTL - I/O Interrupt Control
//
//*****************************************************************************
// These bits set the IOINT interrupts when written with a 1.
#define AM_REG_IOSLAVE_IOINTCTL_IOINTSET_S 24
#define AM_REG_IOSLAVE_IOINTCTL_IOINTSET_M 0xFF000000
#define AM_REG_IOSLAVE_IOINTCTL_IOINTSET(n) (((uint32_t)(n) << 24) & 0xFF000000)
// This bit clears all of the IOINT interrupts when written with a 1.
#define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR_S 16
#define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR_M 0x00010000
#define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR(n) (((uint32_t)(n) << 16) & 0x00010000)
// These bits read the IOINT interrupts.
#define AM_REG_IOSLAVE_IOINTCTL_IOINT_S 8
#define AM_REG_IOSLAVE_IOINTCTL_IOINT_M 0x0000FF00
#define AM_REG_IOSLAVE_IOINTCTL_IOINT(n) (((uint32_t)(n) << 8) & 0x0000FF00)
// These read-only bits indicate whether the IOINT interrupts are enabled.
#define AM_REG_IOSLAVE_IOINTCTL_IOINTEN_S 0
#define AM_REG_IOSLAVE_IOINTCTL_IOINTEN_M 0x000000FF
#define AM_REG_IOSLAVE_IOINTCTL_IOINTEN(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// IOSLAVE_GENADD - General Address Data
//
//*****************************************************************************
// The data supplied on the last General Address reference.
#define AM_REG_IOSLAVE_GENADD_GADATA_S 0
#define AM_REG_IOSLAVE_GENADD_GADATA_M 0x000000FF
#define AM_REG_IOSLAVE_GENADD_GADATA(n) (((uint32_t)(n) << 0) & 0x000000FF)
#endif // AM_REG_IOSLAVE_H