2017-04-12 09:25:37 +08:00
|
|
|
/**
|
|
|
|
|
******************************************************************************
|
|
|
|
|
* @file stm32f4xx_hal_conf.h
|
|
|
|
|
* @brief HAL configuration file.
|
|
|
|
|
******************************************************************************
|
|
|
|
|
* @attention
|
|
|
|
|
*
|
|
|
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
|
|
|
* are permitted provided that the following conditions are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
|
|
|
* this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
|
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
|
|
|
* and/or other materials provided with the distribution.
|
|
|
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
|
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
|
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
|
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
|
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
******************************************************************************
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
|
|
|
#ifndef __STM32F4xx_HAL_CONF_H
|
|
|
|
|
#define __STM32F4xx_HAL_CONF_H
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
extern "C" {
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#include <stddef.h>
|
|
|
|
|
|
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
|
|
|
|
|
|
/* ########################## Module Selection ############################## */
|
|
|
|
|
/**
|
|
|
|
|
* @brief This is the list of modules to be used in the HAL driver
|
|
|
|
|
*/
|
|
|
|
|
#define HAL_MODULE_ENABLED
|
|
|
|
|
|
|
|
|
|
/* #define HAL_ADC_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_CAN_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_CRC_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_CRYP_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_DAC_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_DCMI_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_DMA2D_MODULE_ENABLED */
|
2017-06-08 15:34:00 +08:00
|
|
|
#define HAL_ETH_MODULE_ENABLED
|
2017-04-12 09:25:37 +08:00
|
|
|
#define HAL_NAND_MODULE_ENABLED
|
|
|
|
|
/* #define HAL_NOR_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_PCCARD_MODULE_ENABLED */
|
2017-06-08 15:34:00 +08:00
|
|
|
#define HAL_SRAM_MODULE_ENABLED
|
2017-04-12 09:25:37 +08:00
|
|
|
#define HAL_SDRAM_MODULE_ENABLED
|
|
|
|
|
/* #define HAL_HASH_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_I2C_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_I2S_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_IWDG_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_LTDC_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_RNG_MODULE_ENABLED */
|
|
|
|
|
#define HAL_RTC_MODULE_ENABLED /* */
|
|
|
|
|
/* #define HAL_SAI_MODULE_ENABLED */
|
|
|
|
|
#define HAL_SD_MODULE_ENABLED /* */
|
2017-06-07 21:04:05 +08:00
|
|
|
#define HAL_SPI_MODULE_ENABLED
|
2017-04-12 09:25:37 +08:00
|
|
|
/* #define HAL_TIM_MODULE_ENABLED */
|
|
|
|
|
#define HAL_UART_MODULE_ENABLED
|
|
|
|
|
#define HAL_USART_MODULE_ENABLED
|
|
|
|
|
/* #define HAL_IRDA_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_WWDG_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_PCD_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_HCD_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_DSI_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_QSPI_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_QSPI_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_CEC_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_DFSDM_MODULE_ENABLED */
|
|
|
|
|
/* #define HAL_LPTIM_MODULE_ENABLED */
|
|
|
|
|
#define HAL_GPIO_MODULE_ENABLED
|
|
|
|
|
#define HAL_DMA_MODULE_ENABLED
|
|
|
|
|
#define HAL_RCC_MODULE_ENABLED
|
|
|
|
|
#define HAL_FLASH_MODULE_ENABLED
|
|
|
|
|
#define HAL_PWR_MODULE_ENABLED
|
|
|
|
|
#define HAL_CORTEX_MODULE_ENABLED
|
|
|
|
|
|
|
|
|
|
/* ########################## HSE/HSI Values adaptation ##################### */
|
|
|
|
|
/**
|
|
|
|
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
|
|
|
|
* This value is used by the RCC HAL module to compute the system frequency
|
|
|
|
|
* (when HSE is used as system clock source, directly or through the PLL).
|
|
|
|
|
*/
|
|
|
|
|
#if !defined (HSE_VALUE)
|
|
|
|
|
#define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
|
|
|
|
|
#endif /* HSE_VALUE */
|
|
|
|
|
|
|
|
|
|
#if !defined (HSE_STARTUP_TIMEOUT)
|
|
|
|
|
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for HSE start up, in ms */
|
|
|
|
|
#endif /* HSE_STARTUP_TIMEOUT */
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* @brief Internal High Speed oscillator (HSI) value.
|
|
|
|
|
* This value is used by the RCC HAL module to compute the system frequency
|
|
|
|
|
* (when HSI is used as system clock source, directly or through the PLL).
|
|
|
|
|
*/
|
|
|
|
|
#if !defined (HSI_VALUE)
|
|
|
|
|
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
|
|
|
|
#endif /* HSI_VALUE */
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* @brief Internal Low Speed oscillator (LSI) value.
|
|
|
|
|
*/
|
|
|
|
|
#if !defined (LSI_VALUE)
|
|
|
|
|
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
|
|
|
|
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
|
|
|
|
The real value may vary depending on the variations
|
|
|
|
|
in voltage and temperature.*/
|
|
|
|
|
/**
|
|
|
|
|
* @brief External Low Speed oscillator (LSE) value.
|
|
|
|
|
*/
|
|
|
|
|
#if !defined (LSE_VALUE)
|
|
|
|
|
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
|
|
|
|
#endif /* LSE_VALUE */
|
|
|
|
|
|
|
|
|
|
#if !defined (LSE_STARTUP_TIMEOUT)
|
|
|
|
|
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
|
|
|
|
#endif /* LSE_STARTUP_TIMEOUT */
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* @brief External clock source for I2S peripheral
|
|
|
|
|
* This value is used by the I2S HAL module to compute the I2S clock source
|
|
|
|
|
* frequency, this source is inserted directly through I2S_CKIN pad.
|
|
|
|
|
*/
|
|
|
|
|
#if !defined (EXTERNAL_CLOCK_VALUE)
|
|
|
|
|
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
|
|
|
|
#endif /* EXTERNAL_CLOCK_VALUE */
|
|
|
|
|
|
|
|
|
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
|
|
|
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
|
|
|
|
|
|
|
|
|
/* ########################### System Configuration ######################### */
|
|
|
|
|
/**
|
|
|
|
|
* @brief This is the HAL system configuration section
|
|
|
|
|
*/
|
|
|
|
|
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
|
|
|
|
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
|
|
|
|
#define USE_RTOS 0U
|
|
|
|
|
#define PREFETCH_ENABLE 1U
|
|
|
|
|
#define INSTRUCTION_CACHE_ENABLE 1U
|
|
|
|
|
#define DATA_CACHE_ENABLE 1U
|
|
|
|
|
|
|
|
|
|
/* ########################## Assert Selection ############################## */
|
|
|
|
|
/**
|
|
|
|
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
|
|
|
|
* HAL drivers code
|
|
|
|
|
*/
|
|
|
|
|
/* #define USE_FULL_ASSERT 1U */
|
|
|
|
|
|
|
|
|
|
/* ################## Ethernet peripheral configuration ##################### */
|
|
|
|
|
|
|
|
|
|
/* Section 1 : Ethernet peripheral configuration */
|
|
|
|
|
|
|
|
|
|
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
|
|
|
|
#define MAC_ADDR0 2U
|
|
|
|
|
#define MAC_ADDR1 0U
|
|
|
|
|
#define MAC_ADDR2 0U
|
|
|
|
|
#define MAC_ADDR3 0U
|
|
|
|
|
#define MAC_ADDR4 0U
|
|
|
|
|
#define MAC_ADDR5 0U
|
|
|
|
|
|
|
|
|
|
/* Definition of the Ethernet driver buffers size and count */
|
|
|
|
|
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
|
|
|
|
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
|
|
|
|
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
|
|
|
|
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
|
|
|
|
|
|
|
|
|
/* Section 2: PHY configuration section */
|
|
|
|
|
|
|
|
|
|
/* DP83848_PHY_ADDRESS Address*/
|
|
|
|
|
#define DP83848_PHY_ADDRESS 0x01U
|
|
|
|
|
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
|
|
|
|
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
|
|
|
|
/* PHY Configuration delay */
|
|
|
|
|
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
|
|
|
|
|
|
|
|
|
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
|
|
|
|
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
|
|
|
|
|
|
|
|
|
/* Section 3: Common PHY Registers */
|
|
|
|
|
|
|
|
|
|
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
|
|
|
|
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
|
|
|
|
|
|
|
|
|
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
|
|
|
|
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
|
|
|
|
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
|
|
|
|
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
|
|
|
|
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
|
|
|
|
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
|
|
|
|
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
|
|
|
|
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
|
|
|
|
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
|
|
|
|
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
|
|
|
|
|
|
|
|
|
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
|
|
|
|
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
|
|
|
|
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
|
|
|
|
|
|
|
|
|
/* Section 4: Extended PHY Registers */
|
|
|
|
|
|
|
|
|
|
#define PHY_SR ((uint16_t)0x0010U) /*!< PHY status register Offset */
|
|
|
|
|
#define PHY_MICR ((uint16_t)0x0011U) /*!< MII Interrupt Control Register */
|
|
|
|
|
#define PHY_MISR ((uint16_t)0x0012U) /*!< MII Interrupt Status and Misc. Control Register */
|
|
|
|
|
|
|
|
|
|
#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
|
|
|
|
|
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
|
|
|
|
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
|
|
|
|
|
|
|
|
|
#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
|
|
|
|
|
#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
|
|
|
|
|
|
|
|
|
|
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
|
|
|
|
|
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
|
|
|
|
|
|
|
|
|
|
/* ################## SPI peripheral configuration ########################## */
|
|
|
|
|
|
|
|
|
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
|
|
|
|
* Activated: CRC code is present inside driver
|
|
|
|
|
* Deactivated: CRC code cleaned from driver
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define USE_SPI_CRC 0U
|
|
|
|
|
|
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
|
|
|
/**
|
|
|
|
|
* @brief Include module's header file
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_RCC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_rcc.h"
|
|
|
|
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_gpio.h"
|
|
|
|
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DMA_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dma.h"
|
|
|
|
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_cortex.h"
|
|
|
|
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_ADC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_adc.h"
|
|
|
|
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_CAN_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_can.h"
|
|
|
|
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_CRC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_crc.h"
|
|
|
|
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_CRYP_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_cryp.h"
|
|
|
|
|
#endif /* HAL_CRYP_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DMA2D_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dma2d.h"
|
|
|
|
|
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DAC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dac.h"
|
|
|
|
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DCMI_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dcmi.h"
|
|
|
|
|
#endif /* HAL_DCMI_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_ETH_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_eth.h"
|
|
|
|
|
#endif /* HAL_ETH_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_flash.h"
|
|
|
|
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SRAM_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_sram.h"
|
|
|
|
|
#endif /* HAL_SRAM_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_NOR_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_nor.h"
|
|
|
|
|
#endif /* HAL_NOR_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_NAND_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_nand.h"
|
|
|
|
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_PCCARD_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_pccard.h"
|
|
|
|
|
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SDRAM_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_sdram.h"
|
|
|
|
|
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_HASH_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_hash.h"
|
|
|
|
|
#endif /* HAL_HASH_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_I2C_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_i2c.h"
|
|
|
|
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_I2S_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_i2s.h"
|
|
|
|
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_iwdg.h"
|
|
|
|
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_LTDC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_ltdc.h"
|
|
|
|
|
#endif /* HAL_LTDC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_PWR_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_pwr.h"
|
|
|
|
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_RNG_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_rng.h"
|
|
|
|
|
#endif /* HAL_RNG_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_RTC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_rtc.h"
|
|
|
|
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SAI_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_sai.h"
|
|
|
|
|
#endif /* HAL_SAI_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SD_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_sd.h"
|
|
|
|
|
#endif /* HAL_SD_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_spi.h"
|
|
|
|
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_TIM_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_tim.h"
|
|
|
|
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_uart.h"
|
|
|
|
|
#endif /* HAL_UART_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_USART_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_usart.h"
|
|
|
|
|
#endif /* HAL_USART_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_irda.h"
|
|
|
|
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_smartcard.h"
|
|
|
|
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_wwdg.h"
|
|
|
|
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_PCD_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_pcd.h"
|
|
|
|
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_HCD_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_hcd.h"
|
|
|
|
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DSI_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dsi.h"
|
|
|
|
|
#endif /* HAL_DSI_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_QSPI_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_qspi.h"
|
|
|
|
|
#endif /* HAL_QSPI_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_CEC_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_cec.h"
|
|
|
|
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_fmpi2c.h"
|
|
|
|
|
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_spdifrx.h"
|
|
|
|
|
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_DFSDM_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_dfsdm.h"
|
|
|
|
|
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
#ifdef HAL_LPTIM_MODULE_ENABLED
|
|
|
|
|
#include "stm32f4xx_hal_lptim.h"
|
|
|
|
|
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
|
|
|
|
|
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
|
/**
|
|
|
|
|
* @brief The assert_param macro is used for function's parameters check.
|
|
|
|
|
* @param expr: If expr is false, it calls assert_failed function
|
|
|
|
|
* which reports the name of the source file and the source
|
|
|
|
|
* line number of the call that failed.
|
|
|
|
|
* If expr is true, it returns no value.
|
|
|
|
|
* @retval None
|
|
|
|
|
*/
|
|
|
|
|
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
|
|
|
|
/* Exported functions ------------------------------------------------------- */
|
|
|
|
|
void assert_failed(uint8_t* file, uint32_t line);
|
|
|
|
|
#else
|
|
|
|
|
#define assert_param(expr) ((void)0)
|
|
|
|
|
#endif /* USE_FULL_ASSERT */
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* __STM32F4xx_HAL_CONF_H */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
