140 lines
5.9 KiB
C
140 lines
5.9 KiB
C
|
/*
|
||
|
|
* @brief LPC5410X IOCON register block and driver
|
||
|
|
*
|
||
|
|
* @note
|
||
|
|
* Copyright(C) NXP Semiconductors, 2014
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* @par
|
||
|
|
* Software that is described herein is for illustrative purposes only
|
||
|
|
* which provides customers with programming information regarding the
|
||
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
||
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
||
|
|
* all warranties, express or implied, including all implied warranties of
|
||
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
||
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
||
|
|
* or liability for the use of the software, conveys no license or rights under any
|
||
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
||
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
||
|
|
* in the software without notification. NXP Semiconductors also makes no
|
||
|
|
* representation or warranty that such application will be suitable for the
|
||
|
|
* specified use without further testing or modification.
|
||
|
|
*
|
||
|
|
* @par
|
||
|
|
* Permission to use, copy, modify, and distribute this software and its
|
||
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
||
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
||
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
||
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
||
|
|
* this code.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __IOCON_5410X_H_
|
||
|
|
#define __IOCON_5410X_H_
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/** @defgroup IOCON_5410X CHIP: LPC5410X IOCON register block and driver
|
||
|
|
* @ingroup CHIP_5410X_DRIVERS
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief LPC5410X IO Configuration Unit register block structure
|
||
|
|
*/
|
||
|
|
typedef struct { /*!< LPC5410X IOCON Structure */
|
||
|
|
__IO uint32_t PIO[2][32];
|
||
|
|
} LPC_IOCON_T;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Array of IOCON pin definitions passed to Chip_IOCON_SetPinMuxing() must be in this format
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
uint32_t port : 8; /* Pin port */
|
||
|
|
uint32_t pin : 8; /* Pin number */
|
||
|
|
uint32_t modefunc : 16; /* Function and mode */
|
||
|
|
} PINMUX_GRP_T;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* IOCON function and mode selection definitions
|
||
|
|
* See the User Manual for specific modes and functions supported by the
|
||
|
|
* various LPC15XX pins.
|
||
|
|
*/
|
||
|
|
#define IOCON_FUNC0 0x0 /*!< Selects pin function 0 */
|
||
|
|
#define IOCON_FUNC1 0x1 /*!< Selects pin function 1 */
|
||
|
|
#define IOCON_FUNC2 0x2 /*!< Selects pin function 2 */
|
||
|
|
#define IOCON_FUNC3 0x3 /*!< Selects pin function 3 */
|
||
|
|
#define IOCON_FUNC4 0x4 /*!< Selects pin function 4 */
|
||
|
|
#define IOCON_FUNC5 0x5 /*!< Selects pin function 5 */
|
||
|
|
#define IOCON_FUNC6 0x6 /*!< Selects pin function 6 */
|
||
|
|
#define IOCON_FUNC7 0x7 /*!< Selects pin function 7 */
|
||
|
|
#define IOCON_MODE_INACT (0x0 << 3) /*!< No addition pin function */
|
||
|
|
#define IOCON_MODE_PULLDOWN (0x1 << 3) /*!< Selects pull-down function */
|
||
|
|
#define IOCON_MODE_PULLUP (0x2 << 3) /*!< Selects pull-up function */
|
||
|
|
#define IOCON_MODE_REPEATER (0x3 << 3) /*!< Selects pin repeater function */
|
||
|
|
#define IOCON_HYS_EN (0x1 << 5) /*!< Enables hysteresis */
|
||
|
|
#define IOCON_GPIO_MODE (0x1 << 5) /*!< GPIO Mode */
|
||
|
|
#define IOCON_I2C_SLEW (0x1 << 5) /*!< I2C Slew Rate Control */
|
||
|
|
#define IOCON_INV_EN (0x1 << 6) /*!< Enables invert function on input */
|
||
|
|
#define IOCON_ANALOG_EN (0x0 << 7) /*!< Enables analog function by setting 0 to bit 7 */
|
||
|
|
#define IOCON_DIGITAL_EN (0x1 << 7) /*!< Enables digital function by setting 1 to bit 7(default) */
|
||
|
|
#define IOCON_STDI2C_EN (0x1 << 8) /*!< I2C standard mode/fast-mode */
|
||
|
|
#define IOCON_FASTI2C_EN (0x3 << 8) /*!< I2C Fast-mode Plus and high-speed slave */
|
||
|
|
#define IOCON_INPFILT_OFF (0x1 << 8) /*!< Input filter Off for GPIO pins */
|
||
|
|
#define IOCON_INPFILT_ON (0x0 << 8) /*!< Input filter On for GPIO pins */
|
||
|
|
#define IOCON_OPENDRAIN_EN (0x1 << 10) /*!< Enables open-drain function */
|
||
|
|
#define IOCON_S_MODE_0CLK (0x0 << 11) /*!< Bypass input filter */
|
||
|
|
#define IOCON_S_MODE_1CLK (0x1 << 11) /*!< Input pulses shorter than 1 filter clock are rejected */
|
||
|
|
#define IOCON_S_MODE_2CLK (0x2 << 11) /*!< Input pulses shorter than 2 filter clock2 are rejected */
|
||
|
|
#define IOCON_S_MODE_3CLK (0x3 << 11) /*!< Input pulses shorter than 3 filter clock2 are rejected */
|
||
|
|
#define IOCON_S_MODE(clks) ((clks) << 11) /*!< Select clocks for digital input filter mode */
|
||
|
|
#define IOCON_CLKDIV(div) ((div) << 13) /*!< Select peripheral clock divider for input filter sampling clock, 2^n, n=0-6 */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Sets I/O Control pin mux
|
||
|
|
* @param pIOCON : The base of IOCON peripheral on the chip
|
||
|
|
* @param port : GPIO port to mux
|
||
|
|
* @param pin : GPIO pin to mux
|
||
|
|
* @param modefunc : OR'ed values or type IOCON_*
|
||
|
|
* @return Nothing
|
||
|
|
*/
|
||
|
|
STATIC INLINE void Chip_IOCON_PinMuxSet(LPC_IOCON_T *pIOCON, uint8_t port, uint8_t pin, uint32_t modefunc)
|
||
|
|
{
|
||
|
|
pIOCON->PIO[port][pin] = modefunc;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief I/O Control pin mux
|
||
|
|
* @param pIOCON : The base of IOCON peripheral on the chip
|
||
|
|
* @param port : GPIO port to mux
|
||
|
|
* @param pin : GPIO pin to mux
|
||
|
|
* @param mode : OR'ed values or type IOCON_*
|
||
|
|
* @param func : Pin function, value of type IOCON_FUNC?
|
||
|
|
* @return Nothing
|
||
|
|
*/
|
||
|
|
STATIC INLINE void Chip_IOCON_PinMux(LPC_IOCON_T *pIOCON, uint8_t port, uint8_t pin, uint16_t mode, uint8_t func)
|
||
|
|
{
|
||
|
|
Chip_IOCON_PinMuxSet(pIOCON, port, pin, (uint32_t) (mode | func));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set all I/O Control pin muxing
|
||
|
|
* @param pIOCON : The base of IOCON peripheral on the chip
|
||
|
|
* @param pinArray : Pointer to array of pin mux selections
|
||
|
|
* @param arrayLength : Number of entries in pinArray
|
||
|
|
* @return Nothing
|
||
|
|
*/
|
||
|
|
void Chip_IOCON_SetPinMuxing(LPC_IOCON_T *pIOCON, const PINMUX_GRP_T *pinArray, uint32_t arrayLength);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __IOCON_5410X_H_ */
|