chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/frdm-k64f/device/MK64F12/MK64F12_mpu.h

1924 lines
74 KiB
C
Raw Normal View History

add Freescale k64F bsp. FRDM-K64 based
2014-06-29 00:34:20 +08:00
/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_MPU_REGISTERS_H__
#define __HW_MPU_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 MPU
*
* Memory protection unit
*
* Registers defined in this header file:
* - HW_MPU_CESR - Control/Error Status Register
* - HW_MPU_EARn - Error Address Register, slave port n
* - HW_MPU_EDRn - Error Detail Register, slave port n
* - HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0
* - HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1
* - HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2
* - HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3
* - HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n
*
* - hw_mpu_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_MPU_BASE
#define HW_MPU_INSTANCE_COUNT (1U) //!< Number of instances of the MPU module.
#define REGS_MPU_BASE (0x4000D000U) //!< Base address for MPU.
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_CESR - Control/Error Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_CESR - Control/Error Status Register (RW)
*
* Reset value: 0x00815101U
*/
typedef union _hw_mpu_cesr
{
uint32_t U;
struct _hw_mpu_cesr_bitfields
{
uint32_t VLD : 1; //!< [0] Valid
uint32_t RESERVED0 : 7; //!< [7:1]
uint32_t NRGD : 4; //!< [11:8] Number Of Region Descriptors
uint32_t NSP : 4; //!< [15:12] Number Of Slave Ports
uint32_t HRL : 4; //!< [19:16] Hardware Revision Level
uint32_t RESERVED1 : 7; //!< [26:20]
uint32_t SPERR : 5; //!< [31:27] Slave Port n Error
} B;
} hw_mpu_cesr_t;
#endif
/*!
* @name Constants and macros for entire MPU_CESR register
*/
//@{
#define HW_MPU_CESR_ADDR (REGS_MPU_BASE + 0x0U)
#ifndef __LANGUAGE_ASM__
#define HW_MPU_CESR (*(__IO hw_mpu_cesr_t *) HW_MPU_CESR_ADDR)
#define HW_MPU_CESR_RD() (HW_MPU_CESR.U)
#define HW_MPU_CESR_WR(v) (HW_MPU_CESR.U = (v))
#define HW_MPU_CESR_SET(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() | (v)))
#define HW_MPU_CESR_CLR(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() & ~(v)))
#define HW_MPU_CESR_TOG(v) (HW_MPU_CESR_WR(HW_MPU_CESR_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_CESR bitfields
*/
/*!
* @name Register MPU_CESR, field VLD[0] (RW)
*
* Global enable/disable for the MPU.
*
* Values:
* - 0 - MPU is disabled. All accesses from all bus masters are allowed.
* - 1 - MPU is enabled
*/
//@{
#define BP_MPU_CESR_VLD (0U) //!< Bit position for MPU_CESR_VLD.
#define BM_MPU_CESR_VLD (0x00000001U) //!< Bit mask for MPU_CESR_VLD.
#define BS_MPU_CESR_VLD (1U) //!< Bit field size in bits for MPU_CESR_VLD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_CESR_VLD field.
#define BR_MPU_CESR_VLD (BITBAND_ACCESS32(HW_MPU_CESR_ADDR, BP_MPU_CESR_VLD))
#endif
//! @brief Format value for bitfield MPU_CESR_VLD.
#define BF_MPU_CESR_VLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_CESR_VLD), uint32_t) & BM_MPU_CESR_VLD)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VLD field to a new value.
#define BW_MPU_CESR_VLD(v) (BITBAND_ACCESS32(HW_MPU_CESR_ADDR, BP_MPU_CESR_VLD) = (v))
#endif
//@}
/*!
* @name Register MPU_CESR, field NRGD[11:8] (RO)
*
* Indicates the number of region descriptors implemented in the MPU.
*
* Values:
* - 0000 - 8 region descriptors
* - 0001 - 12 region descriptors
* - 0010 - 16 region descriptors
*/
//@{
#define BP_MPU_CESR_NRGD (8U) //!< Bit position for MPU_CESR_NRGD.
#define BM_MPU_CESR_NRGD (0x00000F00U) //!< Bit mask for MPU_CESR_NRGD.
#define BS_MPU_CESR_NRGD (4U) //!< Bit field size in bits for MPU_CESR_NRGD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_CESR_NRGD field.
#define BR_MPU_CESR_NRGD (HW_MPU_CESR.B.NRGD)
#endif
//@}
/*!
* @name Register MPU_CESR, field NSP[15:12] (RO)
*
* Specifies the number of slave ports connected to the MPU.
*/
//@{
#define BP_MPU_CESR_NSP (12U) //!< Bit position for MPU_CESR_NSP.
#define BM_MPU_CESR_NSP (0x0000F000U) //!< Bit mask for MPU_CESR_NSP.
#define BS_MPU_CESR_NSP (4U) //!< Bit field size in bits for MPU_CESR_NSP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_CESR_NSP field.
#define BR_MPU_CESR_NSP (HW_MPU_CESR.B.NSP)
#endif
//@}
/*!
* @name Register MPU_CESR, field HRL[19:16] (RO)
*
* Specifies the MPU's hardware and definition revision level. It can be read by
* software to determine the functional definition of the module.
*/
//@{
#define BP_MPU_CESR_HRL (16U) //!< Bit position for MPU_CESR_HRL.
#define BM_MPU_CESR_HRL (0x000F0000U) //!< Bit mask for MPU_CESR_HRL.
#define BS_MPU_CESR_HRL (4U) //!< Bit field size in bits for MPU_CESR_HRL.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_CESR_HRL field.
#define BR_MPU_CESR_HRL (HW_MPU_CESR.B.HRL)
#endif
//@}
/*!
* @name Register MPU_CESR, field SPERR[31:27] (W1C)
*
* Indicates a captured error in EARn and EDRn. This bit is set when the
* hardware detects an error and records the faulting address and attributes. It is
* cleared by writing one to it. If another error is captured at the exact same cycle
* as the write, the flag remains set. A find-first-one instruction or
* equivalent can detect the presence of a captured error. The following shows the
* correspondence between the bit number and slave port number: Bit 31 corresponds to
* slave port 0. Bit 30 corresponds to slave port 1. Bit 29 corresponds to slave
* port 2. Bit 28 corresponds to slave port 3. Bit 27 corresponds to slave port 4.
*
* Values:
* - 0 - No error has occurred for slave port n.
* - 1 - An error has occurred for slave port n.
*/
//@{
#define BP_MPU_CESR_SPERR (27U) //!< Bit position for MPU_CESR_SPERR.
#define BM_MPU_CESR_SPERR (0xF8000000U) //!< Bit mask for MPU_CESR_SPERR.
#define BS_MPU_CESR_SPERR (5U) //!< Bit field size in bits for MPU_CESR_SPERR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_CESR_SPERR field.
#define BR_MPU_CESR_SPERR (HW_MPU_CESR.B.SPERR)
#endif
//! @brief Format value for bitfield MPU_CESR_SPERR.
#define BF_MPU_CESR_SPERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_CESR_SPERR), uint32_t) & BM_MPU_CESR_SPERR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SPERR field to a new value.
#define BW_MPU_CESR_SPERR(v) (HW_MPU_CESR_WR((HW_MPU_CESR_RD() & ~BM_MPU_CESR_SPERR) | BF_MPU_CESR_SPERR(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_EARn - Error Address Register, slave port n
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_EARn - Error Address Register, slave port n (RO)
*
* Reset value: 0x00000000U
*
* When the MPU detects an access error on slave port n, the 32-bit reference
* address is captured in this read-only register and the corresponding bit in
* CESR[SPERR] set. Additional information about the faulting access is captured in
* the corresponding EDRn at the same time. This register and the corresponding
* EDRn contain the most recent access error; there are no hardware interlocks with
* CESR[SPERR], as the error registers are always loaded upon the occurrence of
* each protection violation.
*/
typedef union _hw_mpu_earn
{
uint32_t U;
struct _hw_mpu_earn_bitfields
{
uint32_t EADDR : 32; //!< [31:0] Error Address
} B;
} hw_mpu_earn_t;
#endif
/*!
* @name Constants and macros for entire MPU_EARn register
*/
//@{
#define HW_MPU_EARn_COUNT (5U)
#define HW_MPU_EARn_ADDR(n) (REGS_MPU_BASE + 0x10U + (0x8U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_EARn(n) (*(__I hw_mpu_earn_t *) HW_MPU_EARn_ADDR(n))
#define HW_MPU_EARn_RD(n) (HW_MPU_EARn(n).U)
#endif
//@}
/*
* Constants & macros for individual MPU_EARn bitfields
*/
/*!
* @name Register MPU_EARn, field EADDR[31:0] (RO)
*
* Indicates the reference address from slave port n that generated the access
* error
*/
//@{
#define BP_MPU_EARn_EADDR (0U) //!< Bit position for MPU_EARn_EADDR.
#define BM_MPU_EARn_EADDR (0xFFFFFFFFU) //!< Bit mask for MPU_EARn_EADDR.
#define BS_MPU_EARn_EADDR (32U) //!< Bit field size in bits for MPU_EARn_EADDR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EARn_EADDR field.
#define BR_MPU_EARn_EADDR(n) (HW_MPU_EARn(n).U)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_EDRn - Error Detail Register, slave port n
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_EDRn - Error Detail Register, slave port n (RO)
*
* Reset value: 0x00000000U
*
* When the MPU detects an access error on slave port n, 32 bits of error detail
* are captured in this read-only register and the corresponding bit in
* CESR[SPERR] is set. Information on the faulting address is captured in the
* corresponding EARn register at the same time. This register and the corresponding EARn
* register contain the most recent access error; there are no hardware interlocks
* with CESR[SPERR] as the error registers are always loaded upon the occurrence
* of each protection violation.
*/
typedef union _hw_mpu_edrn
{
uint32_t U;
struct _hw_mpu_edrn_bitfields
{
uint32_t ERW : 1; //!< [0] Error Read/Write
uint32_t EATTR : 3; //!< [3:1] Error Attributes
uint32_t EMN : 4; //!< [7:4] Error Master Number
uint32_t EPID : 8; //!< [15:8] Error Process Identification
uint32_t EACD : 16; //!< [31:16] Error Access Control Detail
} B;
} hw_mpu_edrn_t;
#endif
/*!
* @name Constants and macros for entire MPU_EDRn register
*/
//@{
#define HW_MPU_EDRn_COUNT (5U)
#define HW_MPU_EDRn_ADDR(n) (REGS_MPU_BASE + 0x14U + (0x8U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_EDRn(n) (*(__I hw_mpu_edrn_t *) HW_MPU_EDRn_ADDR(n))
#define HW_MPU_EDRn_RD(n) (HW_MPU_EDRn(n).U)
#endif
//@}
/*
* Constants & macros for individual MPU_EDRn bitfields
*/
/*!
* @name Register MPU_EDRn, field ERW[0] (RO)
*
* Indicates the access type of the faulting reference.
*
* Values:
* - 0 - Read
* - 1 - Write
*/
//@{
#define BP_MPU_EDRn_ERW (0U) //!< Bit position for MPU_EDRn_ERW.
#define BM_MPU_EDRn_ERW (0x00000001U) //!< Bit mask for MPU_EDRn_ERW.
#define BS_MPU_EDRn_ERW (1U) //!< Bit field size in bits for MPU_EDRn_ERW.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EDRn_ERW field.
#define BR_MPU_EDRn_ERW(n) (BITBAND_ACCESS32(HW_MPU_EDRn_ADDR(n), BP_MPU_EDRn_ERW))
#endif
//@}
/*!
* @name Register MPU_EDRn, field EATTR[3:1] (RO)
*
* Indicates attribute information about the faulting reference. All other
* encodings are reserved.
*
* Values:
* - 000 - User mode, instruction access
* - 001 - User mode, data access
* - 010 - Supervisor mode, instruction access
* - 011 - Supervisor mode, data access
*/
//@{
#define BP_MPU_EDRn_EATTR (1U) //!< Bit position for MPU_EDRn_EATTR.
#define BM_MPU_EDRn_EATTR (0x0000000EU) //!< Bit mask for MPU_EDRn_EATTR.
#define BS_MPU_EDRn_EATTR (3U) //!< Bit field size in bits for MPU_EDRn_EATTR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EDRn_EATTR field.
#define BR_MPU_EDRn_EATTR(n) (HW_MPU_EDRn(n).B.EATTR)
#endif
//@}
/*!
* @name Register MPU_EDRn, field EMN[7:4] (RO)
*
* Indicates the bus master that generated the access error.
*/
//@{
#define BP_MPU_EDRn_EMN (4U) //!< Bit position for MPU_EDRn_EMN.
#define BM_MPU_EDRn_EMN (0x000000F0U) //!< Bit mask for MPU_EDRn_EMN.
#define BS_MPU_EDRn_EMN (4U) //!< Bit field size in bits for MPU_EDRn_EMN.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EDRn_EMN field.
#define BR_MPU_EDRn_EMN(n) (HW_MPU_EDRn(n).B.EMN)
#endif
//@}
/*!
* @name Register MPU_EDRn, field EPID[15:8] (RO)
*
* Records the process identifier of the faulting reference. The process
* identifier is typically driven only by processor cores; for other bus masters, this
* field is cleared.
*/
//@{
#define BP_MPU_EDRn_EPID (8U) //!< Bit position for MPU_EDRn_EPID.
#define BM_MPU_EDRn_EPID (0x0000FF00U) //!< Bit mask for MPU_EDRn_EPID.
#define BS_MPU_EDRn_EPID (8U) //!< Bit field size in bits for MPU_EDRn_EPID.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EDRn_EPID field.
#define BR_MPU_EDRn_EPID(n) (HW_MPU_EDRn(n).B.EPID)
#endif
//@}
/*!
* @name Register MPU_EDRn, field EACD[31:16] (RO)
*
* Indicates the region descriptor with the access error. If EDRn contains a
* captured error and EACD is cleared, an access did not hit in any region
* descriptor. If only a single EACD bit is set, the protection error was caused by a
* single non-overlapping region descriptor. If two or more EACD bits are set, the
* protection error was caused by an overlapping set of region descriptors.
*/
//@{
#define BP_MPU_EDRn_EACD (16U) //!< Bit position for MPU_EDRn_EACD.
#define BM_MPU_EDRn_EACD (0xFFFF0000U) //!< Bit mask for MPU_EDRn_EACD.
#define BS_MPU_EDRn_EACD (16U) //!< Bit field size in bits for MPU_EDRn_EACD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_EDRn_EACD field.
#define BR_MPU_EDRn_EACD(n) (HW_MPU_EDRn(n).B.EACD)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_RGDn_WORD0 - Region Descriptor n, Word 0 (RW)
*
* Reset value: 0x00000000U
*
* The first word of the region descriptor defines the 0-modulo-32 byte start
* address of the memory region. Writes to this register clear the region
* descriptor's valid bit (RGDn_WORD3[VLD]).
*/
typedef union _hw_mpu_rgdn_word0
{
uint32_t U;
struct _hw_mpu_rgdn_word0_bitfields
{
uint32_t RESERVED0 : 5; //!< [4:0]
uint32_t SRTADDR : 27; //!< [31:5] Start Address
} B;
} hw_mpu_rgdn_word0_t;
#endif
/*!
* @name Constants and macros for entire MPU_RGDn_WORD0 register
*/
//@{
#define HW_MPU_RGDn_WORD0_COUNT (12U)
#define HW_MPU_RGDn_WORD0_ADDR(n) (REGS_MPU_BASE + 0x400U + (0x10U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_RGDn_WORD0(n) (*(__IO hw_mpu_rgdn_word0_t *) HW_MPU_RGDn_WORD0_ADDR(n))
#define HW_MPU_RGDn_WORD0_RD(n) (HW_MPU_RGDn_WORD0(n).U)
#define HW_MPU_RGDn_WORD0_WR(n, v) (HW_MPU_RGDn_WORD0(n).U = (v))
#define HW_MPU_RGDn_WORD0_SET(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) | (v)))
#define HW_MPU_RGDn_WORD0_CLR(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) & ~(v)))
#define HW_MPU_RGDn_WORD0_TOG(n, v) (HW_MPU_RGDn_WORD0_WR(n, HW_MPU_RGDn_WORD0_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_RGDn_WORD0 bitfields
*/
/*!
* @name Register MPU_RGDn_WORD0, field SRTADDR[31:5] (RW)
*
* Defines the most significant bits of the 0-modulo-32 byte start address of
* the memory region.
*/
//@{
#define BP_MPU_RGDn_WORD0_SRTADDR (5U) //!< Bit position for MPU_RGDn_WORD0_SRTADDR.
#define BM_MPU_RGDn_WORD0_SRTADDR (0xFFFFFFE0U) //!< Bit mask for MPU_RGDn_WORD0_SRTADDR.
#define BS_MPU_RGDn_WORD0_SRTADDR (27U) //!< Bit field size in bits for MPU_RGDn_WORD0_SRTADDR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD0_SRTADDR field.
#define BR_MPU_RGDn_WORD0_SRTADDR(n) (HW_MPU_RGDn_WORD0(n).B.SRTADDR)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD0_SRTADDR.
#define BF_MPU_RGDn_WORD0_SRTADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD0_SRTADDR), uint32_t) & BM_MPU_RGDn_WORD0_SRTADDR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SRTADDR field to a new value.
#define BW_MPU_RGDn_WORD0_SRTADDR(n, v) (HW_MPU_RGDn_WORD0_WR(n, (HW_MPU_RGDn_WORD0_RD(n) & ~BM_MPU_RGDn_WORD0_SRTADDR) | BF_MPU_RGDn_WORD0_SRTADDR(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_RGDn_WORD1 - Region Descriptor n, Word 1 (RW)
*
* Reset value: 0xFFFFFFFFU
*
* The second word of the region descriptor defines the 31-modulo-32 byte end
* address of the memory region. Writes to this register clear the region
* descriptor's valid bit (RGDn_WORD3[VLD]).
*/
typedef union _hw_mpu_rgdn_word1
{
uint32_t U;
struct _hw_mpu_rgdn_word1_bitfields
{
uint32_t RESERVED0 : 5; //!< [4:0]
uint32_t ENDADDR : 27; //!< [31:5] End Address
} B;
} hw_mpu_rgdn_word1_t;
#endif
/*!
* @name Constants and macros for entire MPU_RGDn_WORD1 register
*/
//@{
#define HW_MPU_RGDn_WORD1_COUNT (12U)
#define HW_MPU_RGDn_WORD1_ADDR(n) (REGS_MPU_BASE + 0x404U + (0x10U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_RGDn_WORD1(n) (*(__IO hw_mpu_rgdn_word1_t *) HW_MPU_RGDn_WORD1_ADDR(n))
#define HW_MPU_RGDn_WORD1_RD(n) (HW_MPU_RGDn_WORD1(n).U)
#define HW_MPU_RGDn_WORD1_WR(n, v) (HW_MPU_RGDn_WORD1(n).U = (v))
#define HW_MPU_RGDn_WORD1_SET(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) | (v)))
#define HW_MPU_RGDn_WORD1_CLR(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) & ~(v)))
#define HW_MPU_RGDn_WORD1_TOG(n, v) (HW_MPU_RGDn_WORD1_WR(n, HW_MPU_RGDn_WORD1_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_RGDn_WORD1 bitfields
*/
/*!
* @name Register MPU_RGDn_WORD1, field ENDADDR[31:5] (RW)
*
* Defines the most significant bits of the 31-modulo-32 byte end address of the
* memory region. The MPU does not verify that ENDADDR >= SRTADDR.
*/
//@{
#define BP_MPU_RGDn_WORD1_ENDADDR (5U) //!< Bit position for MPU_RGDn_WORD1_ENDADDR.
#define BM_MPU_RGDn_WORD1_ENDADDR (0xFFFFFFE0U) //!< Bit mask for MPU_RGDn_WORD1_ENDADDR.
#define BS_MPU_RGDn_WORD1_ENDADDR (27U) //!< Bit field size in bits for MPU_RGDn_WORD1_ENDADDR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD1_ENDADDR field.
#define BR_MPU_RGDn_WORD1_ENDADDR(n) (HW_MPU_RGDn_WORD1(n).B.ENDADDR)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD1_ENDADDR.
#define BF_MPU_RGDn_WORD1_ENDADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD1_ENDADDR), uint32_t) & BM_MPU_RGDn_WORD1_ENDADDR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ENDADDR field to a new value.
#define BW_MPU_RGDn_WORD1_ENDADDR(n, v) (HW_MPU_RGDn_WORD1_WR(n, (HW_MPU_RGDn_WORD1_RD(n) & ~BM_MPU_RGDn_WORD1_ENDADDR) | BF_MPU_RGDn_WORD1_ENDADDR(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_RGDn_WORD2 - Region Descriptor n, Word 2 (RW)
*
* Reset value: 0x0061F7DFU
*
* The third word of the region descriptor defines the access control rights of
* the memory region. The access control privileges depend on two broad
* classifications of bus masters: Bus masters 0-3 have a 5-bit field defining separate
* privilege rights for user and supervisor mode accesses, as well as the optional
* inclusion of a process identification field within the definition. Bus masters
* 4-7 are limited to separate read and write permissions. For the privilege
* rights of bus masters 0-3, there are three flags associated with this function:
* Read (r) refers to accessing the referenced memory address using an operand
* (data) fetch Write (w) refers to updating the referenced memory address using a
* store (data) instruction Execute (x) refers to reading the referenced memory
* address using an instruction fetch Writes to RGDn_WORD2 clear the region
* descriptor's valid bit (RGDn_WORD3[VLD]). If only updating the access controls, write
* to RGDAACn instead because stores to these locations do not affect the
* descriptor's valid bit.
*/
typedef union _hw_mpu_rgdn_word2
{
uint32_t U;
struct _hw_mpu_rgdn_word2_bitfields
{
uint32_t M0UM : 3; //!< [2:0] Bus Master 0 User Mode Access Control
uint32_t M0SM : 2; //!< [4:3] Bus Master 0 Supervisor Mode Access
//! Control
uint32_t M0PE : 1; //!< [5] Bus Master 0 Process Identifier enable
uint32_t M1UM : 3; //!< [8:6] Bus Master 1 User Mode Access Control
uint32_t M1SM : 2; //!< [10:9] Bus Master 1 Supervisor Mode Access
//! Control
uint32_t M1PE : 1; //!< [11] Bus Master 1 Process Identifier enable
uint32_t M2UM : 3; //!< [14:12] Bus Master 2 User Mode Access control
uint32_t M2SM : 2; //!< [16:15] Bus Master 2 Supervisor Mode Access
//! Control
uint32_t M2PE : 1; //!< [17] Bus Master 2 Process Identifier Enable
uint32_t M3UM : 3; //!< [20:18] Bus Master 3 User Mode Access Control
uint32_t M3SM : 2; //!< [22:21] Bus Master 3 Supervisor Mode Access
//! Control
uint32_t M3PE : 1; //!< [23] Bus Master 3 Process Identifier Enable
uint32_t M4WE : 1; //!< [24] Bus Master 4 Write Enable
uint32_t M4RE : 1; //!< [25] Bus Master 4 Read Enable
uint32_t M5WE : 1; //!< [26] Bus Master 5 Write Enable
uint32_t M5RE : 1; //!< [27] Bus Master 5 Read Enable
uint32_t M6WE : 1; //!< [28] Bus Master 6 Write Enable
uint32_t M6RE : 1; //!< [29] Bus Master 6 Read Enable
uint32_t M7WE : 1; //!< [30] Bus Master 7 Write Enable
uint32_t M7RE : 1; //!< [31] Bus Master 7 Read Enable
} B;
} hw_mpu_rgdn_word2_t;
#endif
/*!
* @name Constants and macros for entire MPU_RGDn_WORD2 register
*/
//@{
#define HW_MPU_RGDn_WORD2_COUNT (12U)
#define HW_MPU_RGDn_WORD2_ADDR(n) (REGS_MPU_BASE + 0x408U + (0x10U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_RGDn_WORD2(n) (*(__IO hw_mpu_rgdn_word2_t *) HW_MPU_RGDn_WORD2_ADDR(n))
#define HW_MPU_RGDn_WORD2_RD(n) (HW_MPU_RGDn_WORD2(n).U)
#define HW_MPU_RGDn_WORD2_WR(n, v) (HW_MPU_RGDn_WORD2(n).U = (v))
#define HW_MPU_RGDn_WORD2_SET(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) | (v)))
#define HW_MPU_RGDn_WORD2_CLR(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) & ~(v)))
#define HW_MPU_RGDn_WORD2_TOG(n, v) (HW_MPU_RGDn_WORD2_WR(n, HW_MPU_RGDn_WORD2_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_RGDn_WORD2 bitfields
*/
/*!
* @name Register MPU_RGDn_WORD2, field M0UM[2:0] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M0UM (0U) //!< Bit position for MPU_RGDn_WORD2_M0UM.
#define BM_MPU_RGDn_WORD2_M0UM (0x00000007U) //!< Bit mask for MPU_RGDn_WORD2_M0UM.
#define BS_MPU_RGDn_WORD2_M0UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M0UM field.
#define BR_MPU_RGDn_WORD2_M0UM(n) (HW_MPU_RGDn_WORD2(n).B.M0UM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M0UM.
#define BF_MPU_RGDn_WORD2_M0UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0UM), uint32_t) & BM_MPU_RGDn_WORD2_M0UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0UM field to a new value.
#define BW_MPU_RGDn_WORD2_M0UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M0UM) | BF_MPU_RGDn_WORD2_M0UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M0SM[4:3] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M0SM (3U) //!< Bit position for MPU_RGDn_WORD2_M0SM.
#define BM_MPU_RGDn_WORD2_M0SM (0x00000018U) //!< Bit mask for MPU_RGDn_WORD2_M0SM.
#define BS_MPU_RGDn_WORD2_M0SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M0SM field.
#define BR_MPU_RGDn_WORD2_M0SM(n) (HW_MPU_RGDn_WORD2(n).B.M0SM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M0SM.
#define BF_MPU_RGDn_WORD2_M0SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0SM), uint32_t) & BM_MPU_RGDn_WORD2_M0SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0SM field to a new value.
#define BW_MPU_RGDn_WORD2_M0SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M0SM) | BF_MPU_RGDn_WORD2_M0SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M0PE[5] (RW)
*
* See M0PE description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M0PE (5U) //!< Bit position for MPU_RGDn_WORD2_M0PE.
#define BM_MPU_RGDn_WORD2_M0PE (0x00000020U) //!< Bit mask for MPU_RGDn_WORD2_M0PE.
#define BS_MPU_RGDn_WORD2_M0PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M0PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M0PE field.
#define BR_MPU_RGDn_WORD2_M0PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M0PE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M0PE.
#define BF_MPU_RGDn_WORD2_M0PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M0PE), uint32_t) & BM_MPU_RGDn_WORD2_M0PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0PE field to a new value.
#define BW_MPU_RGDn_WORD2_M0PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M0PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M1UM[8:6] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M1UM (6U) //!< Bit position for MPU_RGDn_WORD2_M1UM.
#define BM_MPU_RGDn_WORD2_M1UM (0x000001C0U) //!< Bit mask for MPU_RGDn_WORD2_M1UM.
#define BS_MPU_RGDn_WORD2_M1UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M1UM field.
#define BR_MPU_RGDn_WORD2_M1UM(n) (HW_MPU_RGDn_WORD2(n).B.M1UM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M1UM.
#define BF_MPU_RGDn_WORD2_M1UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1UM), uint32_t) & BM_MPU_RGDn_WORD2_M1UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1UM field to a new value.
#define BW_MPU_RGDn_WORD2_M1UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M1UM) | BF_MPU_RGDn_WORD2_M1UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M1SM[10:9] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M1SM (9U) //!< Bit position for MPU_RGDn_WORD2_M1SM.
#define BM_MPU_RGDn_WORD2_M1SM (0x00000600U) //!< Bit mask for MPU_RGDn_WORD2_M1SM.
#define BS_MPU_RGDn_WORD2_M1SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M1SM field.
#define BR_MPU_RGDn_WORD2_M1SM(n) (HW_MPU_RGDn_WORD2(n).B.M1SM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M1SM.
#define BF_MPU_RGDn_WORD2_M1SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1SM), uint32_t) & BM_MPU_RGDn_WORD2_M1SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1SM field to a new value.
#define BW_MPU_RGDn_WORD2_M1SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M1SM) | BF_MPU_RGDn_WORD2_M1SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M1PE[11] (RW)
*
* See M3PE description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M1PE (11U) //!< Bit position for MPU_RGDn_WORD2_M1PE.
#define BM_MPU_RGDn_WORD2_M1PE (0x00000800U) //!< Bit mask for MPU_RGDn_WORD2_M1PE.
#define BS_MPU_RGDn_WORD2_M1PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M1PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M1PE field.
#define BR_MPU_RGDn_WORD2_M1PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M1PE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M1PE.
#define BF_MPU_RGDn_WORD2_M1PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M1PE), uint32_t) & BM_MPU_RGDn_WORD2_M1PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1PE field to a new value.
#define BW_MPU_RGDn_WORD2_M1PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M1PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M2UM[14:12] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M2UM (12U) //!< Bit position for MPU_RGDn_WORD2_M2UM.
#define BM_MPU_RGDn_WORD2_M2UM (0x00007000U) //!< Bit mask for MPU_RGDn_WORD2_M2UM.
#define BS_MPU_RGDn_WORD2_M2UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M2UM field.
#define BR_MPU_RGDn_WORD2_M2UM(n) (HW_MPU_RGDn_WORD2(n).B.M2UM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M2UM.
#define BF_MPU_RGDn_WORD2_M2UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2UM), uint32_t) & BM_MPU_RGDn_WORD2_M2UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2UM field to a new value.
#define BW_MPU_RGDn_WORD2_M2UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M2UM) | BF_MPU_RGDn_WORD2_M2UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M2SM[16:15] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M2SM (15U) //!< Bit position for MPU_RGDn_WORD2_M2SM.
#define BM_MPU_RGDn_WORD2_M2SM (0x00018000U) //!< Bit mask for MPU_RGDn_WORD2_M2SM.
#define BS_MPU_RGDn_WORD2_M2SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M2SM field.
#define BR_MPU_RGDn_WORD2_M2SM(n) (HW_MPU_RGDn_WORD2(n).B.M2SM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M2SM.
#define BF_MPU_RGDn_WORD2_M2SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2SM), uint32_t) & BM_MPU_RGDn_WORD2_M2SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2SM field to a new value.
#define BW_MPU_RGDn_WORD2_M2SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M2SM) | BF_MPU_RGDn_WORD2_M2SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M2PE[17] (RW)
*
* See M3PE description.
*/
//@{
#define BP_MPU_RGDn_WORD2_M2PE (17U) //!< Bit position for MPU_RGDn_WORD2_M2PE.
#define BM_MPU_RGDn_WORD2_M2PE (0x00020000U) //!< Bit mask for MPU_RGDn_WORD2_M2PE.
#define BS_MPU_RGDn_WORD2_M2PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M2PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M2PE field.
#define BR_MPU_RGDn_WORD2_M2PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M2PE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M2PE.
#define BF_MPU_RGDn_WORD2_M2PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M2PE), uint32_t) & BM_MPU_RGDn_WORD2_M2PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2PE field to a new value.
#define BW_MPU_RGDn_WORD2_M2PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M2PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M3UM[20:18] (RW)
*
* Defines the access controls for bus master 3 in User mode. M3UM consists of
* three independent bits, enabling read (r), write (w), and execute (x)
* permissions.
*
* Values:
* - 0 - An attempted access of that mode may be terminated with an access error
* (if not allowed by another descriptor) and the access not performed.
* - 1 - Allows the given access type to occur
*/
//@{
#define BP_MPU_RGDn_WORD2_M3UM (18U) //!< Bit position for MPU_RGDn_WORD2_M3UM.
#define BM_MPU_RGDn_WORD2_M3UM (0x001C0000U) //!< Bit mask for MPU_RGDn_WORD2_M3UM.
#define BS_MPU_RGDn_WORD2_M3UM (3U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M3UM field.
#define BR_MPU_RGDn_WORD2_M3UM(n) (HW_MPU_RGDn_WORD2(n).B.M3UM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M3UM.
#define BF_MPU_RGDn_WORD2_M3UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3UM), uint32_t) & BM_MPU_RGDn_WORD2_M3UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3UM field to a new value.
#define BW_MPU_RGDn_WORD2_M3UM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M3UM) | BF_MPU_RGDn_WORD2_M3UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M3SM[22:21] (RW)
*
* Defines the access controls for bus master 3 in Supervisor mode.
*
* Values:
* - 00 - r/w/x; read, write and execute allowed
* - 01 - r/x; read and execute allowed, but no write
* - 10 - r/w; read and write allowed, but no execute
* - 11 - Same as User mode defined in M3UM
*/
//@{
#define BP_MPU_RGDn_WORD2_M3SM (21U) //!< Bit position for MPU_RGDn_WORD2_M3SM.
#define BM_MPU_RGDn_WORD2_M3SM (0x00600000U) //!< Bit mask for MPU_RGDn_WORD2_M3SM.
#define BS_MPU_RGDn_WORD2_M3SM (2U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M3SM field.
#define BR_MPU_RGDn_WORD2_M3SM(n) (HW_MPU_RGDn_WORD2(n).B.M3SM)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M3SM.
#define BF_MPU_RGDn_WORD2_M3SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3SM), uint32_t) & BM_MPU_RGDn_WORD2_M3SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3SM field to a new value.
#define BW_MPU_RGDn_WORD2_M3SM(n, v) (HW_MPU_RGDn_WORD2_WR(n, (HW_MPU_RGDn_WORD2_RD(n) & ~BM_MPU_RGDn_WORD2_M3SM) | BF_MPU_RGDn_WORD2_M3SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M3PE[23] (RW)
*
* Values:
* - 0 - Do not include the process identifier in the evaluation
* - 1 - Include the process identifier and mask (RGDn_WORD3) in the region hit
* evaluation
*/
//@{
#define BP_MPU_RGDn_WORD2_M3PE (23U) //!< Bit position for MPU_RGDn_WORD2_M3PE.
#define BM_MPU_RGDn_WORD2_M3PE (0x00800000U) //!< Bit mask for MPU_RGDn_WORD2_M3PE.
#define BS_MPU_RGDn_WORD2_M3PE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M3PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M3PE field.
#define BR_MPU_RGDn_WORD2_M3PE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M3PE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M3PE.
#define BF_MPU_RGDn_WORD2_M3PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M3PE), uint32_t) & BM_MPU_RGDn_WORD2_M3PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3PE field to a new value.
#define BW_MPU_RGDn_WORD2_M3PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M3PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M4WE[24] (RW)
*
* Values:
* - 0 - Bus master 4 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 4 writes allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M4WE (24U) //!< Bit position for MPU_RGDn_WORD2_M4WE.
#define BM_MPU_RGDn_WORD2_M4WE (0x01000000U) //!< Bit mask for MPU_RGDn_WORD2_M4WE.
#define BS_MPU_RGDn_WORD2_M4WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M4WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M4WE field.
#define BR_MPU_RGDn_WORD2_M4WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4WE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M4WE.
#define BF_MPU_RGDn_WORD2_M4WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M4WE), uint32_t) & BM_MPU_RGDn_WORD2_M4WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M4WE field to a new value.
#define BW_MPU_RGDn_WORD2_M4WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M4RE[25] (RW)
*
* Values:
* - 0 - Bus master 4 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 4 reads allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M4RE (25U) //!< Bit position for MPU_RGDn_WORD2_M4RE.
#define BM_MPU_RGDn_WORD2_M4RE (0x02000000U) //!< Bit mask for MPU_RGDn_WORD2_M4RE.
#define BS_MPU_RGDn_WORD2_M4RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M4RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M4RE field.
#define BR_MPU_RGDn_WORD2_M4RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4RE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M4RE.
#define BF_MPU_RGDn_WORD2_M4RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M4RE), uint32_t) & BM_MPU_RGDn_WORD2_M4RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M4RE field to a new value.
#define BW_MPU_RGDn_WORD2_M4RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M4RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M5WE[26] (RW)
*
* Values:
* - 0 - Bus master 5 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 5 writes allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M5WE (26U) //!< Bit position for MPU_RGDn_WORD2_M5WE.
#define BM_MPU_RGDn_WORD2_M5WE (0x04000000U) //!< Bit mask for MPU_RGDn_WORD2_M5WE.
#define BS_MPU_RGDn_WORD2_M5WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M5WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M5WE field.
#define BR_MPU_RGDn_WORD2_M5WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5WE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M5WE.
#define BF_MPU_RGDn_WORD2_M5WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M5WE), uint32_t) & BM_MPU_RGDn_WORD2_M5WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M5WE field to a new value.
#define BW_MPU_RGDn_WORD2_M5WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M5RE[27] (RW)
*
* Values:
* - 0 - Bus master 5 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 5 reads allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M5RE (27U) //!< Bit position for MPU_RGDn_WORD2_M5RE.
#define BM_MPU_RGDn_WORD2_M5RE (0x08000000U) //!< Bit mask for MPU_RGDn_WORD2_M5RE.
#define BS_MPU_RGDn_WORD2_M5RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M5RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M5RE field.
#define BR_MPU_RGDn_WORD2_M5RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5RE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M5RE.
#define BF_MPU_RGDn_WORD2_M5RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M5RE), uint32_t) & BM_MPU_RGDn_WORD2_M5RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M5RE field to a new value.
#define BW_MPU_RGDn_WORD2_M5RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M5RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M6WE[28] (RW)
*
* Values:
* - 0 - Bus master 6 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 6 writes allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M6WE (28U) //!< Bit position for MPU_RGDn_WORD2_M6WE.
#define BM_MPU_RGDn_WORD2_M6WE (0x10000000U) //!< Bit mask for MPU_RGDn_WORD2_M6WE.
#define BS_MPU_RGDn_WORD2_M6WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M6WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M6WE field.
#define BR_MPU_RGDn_WORD2_M6WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6WE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M6WE.
#define BF_MPU_RGDn_WORD2_M6WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M6WE), uint32_t) & BM_MPU_RGDn_WORD2_M6WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M6WE field to a new value.
#define BW_MPU_RGDn_WORD2_M6WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M6RE[29] (RW)
*
* Values:
* - 0 - Bus master 6 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 6 reads allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M6RE (29U) //!< Bit position for MPU_RGDn_WORD2_M6RE.
#define BM_MPU_RGDn_WORD2_M6RE (0x20000000U) //!< Bit mask for MPU_RGDn_WORD2_M6RE.
#define BS_MPU_RGDn_WORD2_M6RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M6RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M6RE field.
#define BR_MPU_RGDn_WORD2_M6RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6RE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M6RE.
#define BF_MPU_RGDn_WORD2_M6RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M6RE), uint32_t) & BM_MPU_RGDn_WORD2_M6RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M6RE field to a new value.
#define BW_MPU_RGDn_WORD2_M6RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M6RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M7WE[30] (RW)
*
* Values:
* - 0 - Bus master 7 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 7 writes allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M7WE (30U) //!< Bit position for MPU_RGDn_WORD2_M7WE.
#define BM_MPU_RGDn_WORD2_M7WE (0x40000000U) //!< Bit mask for MPU_RGDn_WORD2_M7WE.
#define BS_MPU_RGDn_WORD2_M7WE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M7WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M7WE field.
#define BR_MPU_RGDn_WORD2_M7WE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7WE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M7WE.
#define BF_MPU_RGDn_WORD2_M7WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M7WE), uint32_t) & BM_MPU_RGDn_WORD2_M7WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M7WE field to a new value.
#define BW_MPU_RGDn_WORD2_M7WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD2, field M7RE[31] (RW)
*
* Values:
* - 0 - Bus master 7 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 7 reads allowed
*/
//@{
#define BP_MPU_RGDn_WORD2_M7RE (31U) //!< Bit position for MPU_RGDn_WORD2_M7RE.
#define BM_MPU_RGDn_WORD2_M7RE (0x80000000U) //!< Bit mask for MPU_RGDn_WORD2_M7RE.
#define BS_MPU_RGDn_WORD2_M7RE (1U) //!< Bit field size in bits for MPU_RGDn_WORD2_M7RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD2_M7RE field.
#define BR_MPU_RGDn_WORD2_M7RE(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7RE))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD2_M7RE.
#define BF_MPU_RGDn_WORD2_M7RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD2_M7RE), uint32_t) & BM_MPU_RGDn_WORD2_M7RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M7RE field to a new value.
#define BW_MPU_RGDn_WORD2_M7RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD2_ADDR(n), BP_MPU_RGDn_WORD2_M7RE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_RGDn_WORD3 - Region Descriptor n, Word 3 (RW)
*
* Reset value: 0x00000001U
*
* The fourth word of the region descriptor contains the optional process
* identifier and mask, plus the region descriptor's valid bit.
*/
typedef union _hw_mpu_rgdn_word3
{
uint32_t U;
struct _hw_mpu_rgdn_word3_bitfields
{
uint32_t VLD : 1; //!< [0] Valid
uint32_t RESERVED0 : 15; //!< [15:1]
uint32_t PIDMASK : 8; //!< [23:16] Process Identifier Mask
uint32_t PID : 8; //!< [31:24] Process Identifier
} B;
} hw_mpu_rgdn_word3_t;
#endif
/*!
* @name Constants and macros for entire MPU_RGDn_WORD3 register
*/
//@{
#define HW_MPU_RGDn_WORD3_COUNT (12U)
#define HW_MPU_RGDn_WORD3_ADDR(n) (REGS_MPU_BASE + 0x40CU + (0x10U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_RGDn_WORD3(n) (*(__IO hw_mpu_rgdn_word3_t *) HW_MPU_RGDn_WORD3_ADDR(n))
#define HW_MPU_RGDn_WORD3_RD(n) (HW_MPU_RGDn_WORD3(n).U)
#define HW_MPU_RGDn_WORD3_WR(n, v) (HW_MPU_RGDn_WORD3(n).U = (v))
#define HW_MPU_RGDn_WORD3_SET(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) | (v)))
#define HW_MPU_RGDn_WORD3_CLR(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) & ~(v)))
#define HW_MPU_RGDn_WORD3_TOG(n, v) (HW_MPU_RGDn_WORD3_WR(n, HW_MPU_RGDn_WORD3_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_RGDn_WORD3 bitfields
*/
/*!
* @name Register MPU_RGDn_WORD3, field VLD[0] (RW)
*
* Signals the region descriptor is valid. Any write to RGDn_WORD0-2 clears this
* bit.
*
* Values:
* - 0 - Region descriptor is invalid
* - 1 - Region descriptor is valid
*/
//@{
#define BP_MPU_RGDn_WORD3_VLD (0U) //!< Bit position for MPU_RGDn_WORD3_VLD.
#define BM_MPU_RGDn_WORD3_VLD (0x00000001U) //!< Bit mask for MPU_RGDn_WORD3_VLD.
#define BS_MPU_RGDn_WORD3_VLD (1U) //!< Bit field size in bits for MPU_RGDn_WORD3_VLD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD3_VLD field.
#define BR_MPU_RGDn_WORD3_VLD(n) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD3_ADDR(n), BP_MPU_RGDn_WORD3_VLD))
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD3_VLD.
#define BF_MPU_RGDn_WORD3_VLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_VLD), uint32_t) & BM_MPU_RGDn_WORD3_VLD)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VLD field to a new value.
#define BW_MPU_RGDn_WORD3_VLD(n, v) (BITBAND_ACCESS32(HW_MPU_RGDn_WORD3_ADDR(n), BP_MPU_RGDn_WORD3_VLD) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD3, field PIDMASK[23:16] (RW)
*
* Provides a masking capability so that multiple process identifiers can be
* included as part of the region hit determination. If a bit in PIDMASK is set,
* then the corresponding PID bit is ignored in the comparison. This field and PID
* are included in the region hit determination if RGDn_WORD2[MxPE] is set. For
* more information on the handling of the PID and PIDMASK, see "Access Evaluation
* - Hit Determination."
*/
//@{
#define BP_MPU_RGDn_WORD3_PIDMASK (16U) //!< Bit position for MPU_RGDn_WORD3_PIDMASK.
#define BM_MPU_RGDn_WORD3_PIDMASK (0x00FF0000U) //!< Bit mask for MPU_RGDn_WORD3_PIDMASK.
#define BS_MPU_RGDn_WORD3_PIDMASK (8U) //!< Bit field size in bits for MPU_RGDn_WORD3_PIDMASK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD3_PIDMASK field.
#define BR_MPU_RGDn_WORD3_PIDMASK(n) (HW_MPU_RGDn_WORD3(n).B.PIDMASK)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD3_PIDMASK.
#define BF_MPU_RGDn_WORD3_PIDMASK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_PIDMASK), uint32_t) & BM_MPU_RGDn_WORD3_PIDMASK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the PIDMASK field to a new value.
#define BW_MPU_RGDn_WORD3_PIDMASK(n, v) (HW_MPU_RGDn_WORD3_WR(n, (HW_MPU_RGDn_WORD3_RD(n) & ~BM_MPU_RGDn_WORD3_PIDMASK) | BF_MPU_RGDn_WORD3_PIDMASK(v)))
#endif
//@}
/*!
* @name Register MPU_RGDn_WORD3, field PID[31:24] (RW)
*
* Specifies the process identifier that is included in the region hit
* determination if RGDn_WORD2[MxPE] is set. PIDMASK can mask individual bits in this
* field.
*/
//@{
#define BP_MPU_RGDn_WORD3_PID (24U) //!< Bit position for MPU_RGDn_WORD3_PID.
#define BM_MPU_RGDn_WORD3_PID (0xFF000000U) //!< Bit mask for MPU_RGDn_WORD3_PID.
#define BS_MPU_RGDn_WORD3_PID (8U) //!< Bit field size in bits for MPU_RGDn_WORD3_PID.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDn_WORD3_PID field.
#define BR_MPU_RGDn_WORD3_PID(n) (HW_MPU_RGDn_WORD3(n).B.PID)
#endif
//! @brief Format value for bitfield MPU_RGDn_WORD3_PID.
#define BF_MPU_RGDn_WORD3_PID(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDn_WORD3_PID), uint32_t) & BM_MPU_RGDn_WORD3_PID)
#ifndef __LANGUAGE_ASM__
//! @brief Set the PID field to a new value.
#define BW_MPU_RGDn_WORD3_PID(n, v) (HW_MPU_RGDn_WORD3_WR(n, (HW_MPU_RGDn_WORD3_RD(n) & ~BM_MPU_RGDn_WORD3_PID) | BF_MPU_RGDn_WORD3_PID(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MPU_RGDAACn - Region Descriptor Alternate Access Control n (RW)
*
* Reset value: 0x0061F7DFU
*
* Because software may adjust only the access controls within a region
* descriptor (RGDn_WORD2) as different tasks execute, an alternate programming view of
* this 32-bit entity is available. Writing to this register does not affect the
* descriptor's valid bit.
*/
typedef union _hw_mpu_rgdaacn
{
uint32_t U;
struct _hw_mpu_rgdaacn_bitfields
{
uint32_t M0UM : 3; //!< [2:0] Bus Master 0 User Mode Access Control
uint32_t M0SM : 2; //!< [4:3] Bus Master 0 Supervisor Mode Access
//! Control
uint32_t M0PE : 1; //!< [5] Bus Master 0 Process Identifier Enable
uint32_t M1UM : 3; //!< [8:6] Bus Master 1 User Mode Access Control
uint32_t M1SM : 2; //!< [10:9] Bus Master 1 Supervisor Mode Access
//! Control
uint32_t M1PE : 1; //!< [11] Bus Master 1 Process Identifier Enable
uint32_t M2UM : 3; //!< [14:12] Bus Master 2 User Mode Access Control
uint32_t M2SM : 2; //!< [16:15] Bus Master 2 Supervisor Mode Access
//! Control
uint32_t M2PE : 1; //!< [17] Bus Master 2 Process Identifier Enable
uint32_t M3UM : 3; //!< [20:18] Bus Master 3 User Mode Access Control
uint32_t M3SM : 2; //!< [22:21] Bus Master 3 Supervisor Mode Access
//! Control
uint32_t M3PE : 1; //!< [23] Bus Master 3 Process Identifier Enable
uint32_t M4WE : 1; //!< [24] Bus Master 4 Write Enable
uint32_t M4RE : 1; //!< [25] Bus Master 4 Read Enable
uint32_t M5WE : 1; //!< [26] Bus Master 5 Write Enable
uint32_t M5RE : 1; //!< [27] Bus Master 5 Read Enable
uint32_t M6WE : 1; //!< [28] Bus Master 6 Write Enable
uint32_t M6RE : 1; //!< [29] Bus Master 6 Read Enable
uint32_t M7WE : 1; //!< [30] Bus Master 7 Write Enable
uint32_t M7RE : 1; //!< [31] Bus Master 7 Read Enable
} B;
} hw_mpu_rgdaacn_t;
#endif
/*!
* @name Constants and macros for entire MPU_RGDAACn register
*/
//@{
#define HW_MPU_RGDAACn_COUNT (12U)
#define HW_MPU_RGDAACn_ADDR(n) (REGS_MPU_BASE + 0x800U + (0x4U * n))
#ifndef __LANGUAGE_ASM__
#define HW_MPU_RGDAACn(n) (*(__IO hw_mpu_rgdaacn_t *) HW_MPU_RGDAACn_ADDR(n))
#define HW_MPU_RGDAACn_RD(n) (HW_MPU_RGDAACn(n).U)
#define HW_MPU_RGDAACn_WR(n, v) (HW_MPU_RGDAACn(n).U = (v))
#define HW_MPU_RGDAACn_SET(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) | (v)))
#define HW_MPU_RGDAACn_CLR(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) & ~(v)))
#define HW_MPU_RGDAACn_TOG(n, v) (HW_MPU_RGDAACn_WR(n, HW_MPU_RGDAACn_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MPU_RGDAACn bitfields
*/
/*!
* @name Register MPU_RGDAACn, field M0UM[2:0] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDAACn_M0UM (0U) //!< Bit position for MPU_RGDAACn_M0UM.
#define BM_MPU_RGDAACn_M0UM (0x00000007U) //!< Bit mask for MPU_RGDAACn_M0UM.
#define BS_MPU_RGDAACn_M0UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M0UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M0UM field.
#define BR_MPU_RGDAACn_M0UM(n) (HW_MPU_RGDAACn(n).B.M0UM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M0UM.
#define BF_MPU_RGDAACn_M0UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0UM), uint32_t) & BM_MPU_RGDAACn_M0UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0UM field to a new value.
#define BW_MPU_RGDAACn_M0UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M0UM) | BF_MPU_RGDAACn_M0UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M0SM[4:3] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDAACn_M0SM (3U) //!< Bit position for MPU_RGDAACn_M0SM.
#define BM_MPU_RGDAACn_M0SM (0x00000018U) //!< Bit mask for MPU_RGDAACn_M0SM.
#define BS_MPU_RGDAACn_M0SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M0SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M0SM field.
#define BR_MPU_RGDAACn_M0SM(n) (HW_MPU_RGDAACn(n).B.M0SM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M0SM.
#define BF_MPU_RGDAACn_M0SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0SM), uint32_t) & BM_MPU_RGDAACn_M0SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0SM field to a new value.
#define BW_MPU_RGDAACn_M0SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M0SM) | BF_MPU_RGDAACn_M0SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M0PE[5] (RW)
*
* See M3PE description.
*/
//@{
#define BP_MPU_RGDAACn_M0PE (5U) //!< Bit position for MPU_RGDAACn_M0PE.
#define BM_MPU_RGDAACn_M0PE (0x00000020U) //!< Bit mask for MPU_RGDAACn_M0PE.
#define BS_MPU_RGDAACn_M0PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M0PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M0PE field.
#define BR_MPU_RGDAACn_M0PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M0PE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M0PE.
#define BF_MPU_RGDAACn_M0PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M0PE), uint32_t) & BM_MPU_RGDAACn_M0PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0PE field to a new value.
#define BW_MPU_RGDAACn_M0PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M0PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M1UM[8:6] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDAACn_M1UM (6U) //!< Bit position for MPU_RGDAACn_M1UM.
#define BM_MPU_RGDAACn_M1UM (0x000001C0U) //!< Bit mask for MPU_RGDAACn_M1UM.
#define BS_MPU_RGDAACn_M1UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M1UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M1UM field.
#define BR_MPU_RGDAACn_M1UM(n) (HW_MPU_RGDAACn(n).B.M1UM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M1UM.
#define BF_MPU_RGDAACn_M1UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1UM), uint32_t) & BM_MPU_RGDAACn_M1UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1UM field to a new value.
#define BW_MPU_RGDAACn_M1UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M1UM) | BF_MPU_RGDAACn_M1UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M1SM[10:9] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDAACn_M1SM (9U) //!< Bit position for MPU_RGDAACn_M1SM.
#define BM_MPU_RGDAACn_M1SM (0x00000600U) //!< Bit mask for MPU_RGDAACn_M1SM.
#define BS_MPU_RGDAACn_M1SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M1SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M1SM field.
#define BR_MPU_RGDAACn_M1SM(n) (HW_MPU_RGDAACn(n).B.M1SM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M1SM.
#define BF_MPU_RGDAACn_M1SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1SM), uint32_t) & BM_MPU_RGDAACn_M1SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1SM field to a new value.
#define BW_MPU_RGDAACn_M1SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M1SM) | BF_MPU_RGDAACn_M1SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M1PE[11] (RW)
*
* See M3PE description.
*/
//@{
#define BP_MPU_RGDAACn_M1PE (11U) //!< Bit position for MPU_RGDAACn_M1PE.
#define BM_MPU_RGDAACn_M1PE (0x00000800U) //!< Bit mask for MPU_RGDAACn_M1PE.
#define BS_MPU_RGDAACn_M1PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M1PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M1PE field.
#define BR_MPU_RGDAACn_M1PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M1PE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M1PE.
#define BF_MPU_RGDAACn_M1PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M1PE), uint32_t) & BM_MPU_RGDAACn_M1PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1PE field to a new value.
#define BW_MPU_RGDAACn_M1PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M1PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M2UM[14:12] (RW)
*
* See M3UM description.
*/
//@{
#define BP_MPU_RGDAACn_M2UM (12U) //!< Bit position for MPU_RGDAACn_M2UM.
#define BM_MPU_RGDAACn_M2UM (0x00007000U) //!< Bit mask for MPU_RGDAACn_M2UM.
#define BS_MPU_RGDAACn_M2UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M2UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M2UM field.
#define BR_MPU_RGDAACn_M2UM(n) (HW_MPU_RGDAACn(n).B.M2UM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M2UM.
#define BF_MPU_RGDAACn_M2UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2UM), uint32_t) & BM_MPU_RGDAACn_M2UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2UM field to a new value.
#define BW_MPU_RGDAACn_M2UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M2UM) | BF_MPU_RGDAACn_M2UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M2SM[16:15] (RW)
*
* See M3SM description.
*/
//@{
#define BP_MPU_RGDAACn_M2SM (15U) //!< Bit position for MPU_RGDAACn_M2SM.
#define BM_MPU_RGDAACn_M2SM (0x00018000U) //!< Bit mask for MPU_RGDAACn_M2SM.
#define BS_MPU_RGDAACn_M2SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M2SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M2SM field.
#define BR_MPU_RGDAACn_M2SM(n) (HW_MPU_RGDAACn(n).B.M2SM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M2SM.
#define BF_MPU_RGDAACn_M2SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2SM), uint32_t) & BM_MPU_RGDAACn_M2SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2SM field to a new value.
#define BW_MPU_RGDAACn_M2SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M2SM) | BF_MPU_RGDAACn_M2SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M2PE[17] (RW)
*
* See M3PE description.
*/
//@{
#define BP_MPU_RGDAACn_M2PE (17U) //!< Bit position for MPU_RGDAACn_M2PE.
#define BM_MPU_RGDAACn_M2PE (0x00020000U) //!< Bit mask for MPU_RGDAACn_M2PE.
#define BS_MPU_RGDAACn_M2PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M2PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M2PE field.
#define BR_MPU_RGDAACn_M2PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M2PE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M2PE.
#define BF_MPU_RGDAACn_M2PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M2PE), uint32_t) & BM_MPU_RGDAACn_M2PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2PE field to a new value.
#define BW_MPU_RGDAACn_M2PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M2PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M3UM[20:18] (RW)
*
* Defines the access controls for bus master 3 in user mode. M3UM consists of
* three independent bits, enabling read (r), write (w), and execute (x)
* permissions.
*
* Values:
* - 0 - An attempted access of that mode may be terminated with an access error
* (if not allowed by another descriptor) and the access not performed.
* - 1 - Allows the given access type to occur
*/
//@{
#define BP_MPU_RGDAACn_M3UM (18U) //!< Bit position for MPU_RGDAACn_M3UM.
#define BM_MPU_RGDAACn_M3UM (0x001C0000U) //!< Bit mask for MPU_RGDAACn_M3UM.
#define BS_MPU_RGDAACn_M3UM (3U) //!< Bit field size in bits for MPU_RGDAACn_M3UM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M3UM field.
#define BR_MPU_RGDAACn_M3UM(n) (HW_MPU_RGDAACn(n).B.M3UM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M3UM.
#define BF_MPU_RGDAACn_M3UM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3UM), uint32_t) & BM_MPU_RGDAACn_M3UM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3UM field to a new value.
#define BW_MPU_RGDAACn_M3UM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M3UM) | BF_MPU_RGDAACn_M3UM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M3SM[22:21] (RW)
*
* Defines the access controls for bus master 3 in Supervisor mode.
*
* Values:
* - 00 - r/w/x; read, write and execute allowed
* - 01 - r/x; read and execute allowed, but no write
* - 10 - r/w; read and write allowed, but no execute
* - 11 - Same as User mode defined in M3UM
*/
//@{
#define BP_MPU_RGDAACn_M3SM (21U) //!< Bit position for MPU_RGDAACn_M3SM.
#define BM_MPU_RGDAACn_M3SM (0x00600000U) //!< Bit mask for MPU_RGDAACn_M3SM.
#define BS_MPU_RGDAACn_M3SM (2U) //!< Bit field size in bits for MPU_RGDAACn_M3SM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M3SM field.
#define BR_MPU_RGDAACn_M3SM(n) (HW_MPU_RGDAACn(n).B.M3SM)
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M3SM.
#define BF_MPU_RGDAACn_M3SM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3SM), uint32_t) & BM_MPU_RGDAACn_M3SM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3SM field to a new value.
#define BW_MPU_RGDAACn_M3SM(n, v) (HW_MPU_RGDAACn_WR(n, (HW_MPU_RGDAACn_RD(n) & ~BM_MPU_RGDAACn_M3SM) | BF_MPU_RGDAACn_M3SM(v)))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M3PE[23] (RW)
*
* Values:
* - 0 - Do not include the process identifier in the evaluation
* - 1 - Include the process identifier and mask (RGDn.RGDAAC) in the region hit
* evaluation
*/
//@{
#define BP_MPU_RGDAACn_M3PE (23U) //!< Bit position for MPU_RGDAACn_M3PE.
#define BM_MPU_RGDAACn_M3PE (0x00800000U) //!< Bit mask for MPU_RGDAACn_M3PE.
#define BS_MPU_RGDAACn_M3PE (1U) //!< Bit field size in bits for MPU_RGDAACn_M3PE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M3PE field.
#define BR_MPU_RGDAACn_M3PE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M3PE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M3PE.
#define BF_MPU_RGDAACn_M3PE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M3PE), uint32_t) & BM_MPU_RGDAACn_M3PE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3PE field to a new value.
#define BW_MPU_RGDAACn_M3PE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M3PE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M4WE[24] (RW)
*
* Values:
* - 0 - Bus master 4 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 4 writes allowed
*/
//@{
#define BP_MPU_RGDAACn_M4WE (24U) //!< Bit position for MPU_RGDAACn_M4WE.
#define BM_MPU_RGDAACn_M4WE (0x01000000U) //!< Bit mask for MPU_RGDAACn_M4WE.
#define BS_MPU_RGDAACn_M4WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M4WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M4WE field.
#define BR_MPU_RGDAACn_M4WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4WE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M4WE.
#define BF_MPU_RGDAACn_M4WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M4WE), uint32_t) & BM_MPU_RGDAACn_M4WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M4WE field to a new value.
#define BW_MPU_RGDAACn_M4WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M4RE[25] (RW)
*
* Values:
* - 0 - Bus master 4 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 4 reads allowed
*/
//@{
#define BP_MPU_RGDAACn_M4RE (25U) //!< Bit position for MPU_RGDAACn_M4RE.
#define BM_MPU_RGDAACn_M4RE (0x02000000U) //!< Bit mask for MPU_RGDAACn_M4RE.
#define BS_MPU_RGDAACn_M4RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M4RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M4RE field.
#define BR_MPU_RGDAACn_M4RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4RE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M4RE.
#define BF_MPU_RGDAACn_M4RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M4RE), uint32_t) & BM_MPU_RGDAACn_M4RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M4RE field to a new value.
#define BW_MPU_RGDAACn_M4RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M4RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M5WE[26] (RW)
*
* Values:
* - 0 - Bus master 5 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 5 writes allowed
*/
//@{
#define BP_MPU_RGDAACn_M5WE (26U) //!< Bit position for MPU_RGDAACn_M5WE.
#define BM_MPU_RGDAACn_M5WE (0x04000000U) //!< Bit mask for MPU_RGDAACn_M5WE.
#define BS_MPU_RGDAACn_M5WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M5WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M5WE field.
#define BR_MPU_RGDAACn_M5WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5WE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M5WE.
#define BF_MPU_RGDAACn_M5WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M5WE), uint32_t) & BM_MPU_RGDAACn_M5WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M5WE field to a new value.
#define BW_MPU_RGDAACn_M5WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M5RE[27] (RW)
*
* Values:
* - 0 - Bus master 5 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 5 reads allowed
*/
//@{
#define BP_MPU_RGDAACn_M5RE (27U) //!< Bit position for MPU_RGDAACn_M5RE.
#define BM_MPU_RGDAACn_M5RE (0x08000000U) //!< Bit mask for MPU_RGDAACn_M5RE.
#define BS_MPU_RGDAACn_M5RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M5RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M5RE field.
#define BR_MPU_RGDAACn_M5RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5RE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M5RE.
#define BF_MPU_RGDAACn_M5RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M5RE), uint32_t) & BM_MPU_RGDAACn_M5RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M5RE field to a new value.
#define BW_MPU_RGDAACn_M5RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M5RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M6WE[28] (RW)
*
* Values:
* - 0 - Bus master 6 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 6 writes allowed
*/
//@{
#define BP_MPU_RGDAACn_M6WE (28U) //!< Bit position for MPU_RGDAACn_M6WE.
#define BM_MPU_RGDAACn_M6WE (0x10000000U) //!< Bit mask for MPU_RGDAACn_M6WE.
#define BS_MPU_RGDAACn_M6WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M6WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M6WE field.
#define BR_MPU_RGDAACn_M6WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6WE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M6WE.
#define BF_MPU_RGDAACn_M6WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M6WE), uint32_t) & BM_MPU_RGDAACn_M6WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M6WE field to a new value.
#define BW_MPU_RGDAACn_M6WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M6RE[29] (RW)
*
* Values:
* - 0 - Bus master 6 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 6 reads allowed
*/
//@{
#define BP_MPU_RGDAACn_M6RE (29U) //!< Bit position for MPU_RGDAACn_M6RE.
#define BM_MPU_RGDAACn_M6RE (0x20000000U) //!< Bit mask for MPU_RGDAACn_M6RE.
#define BS_MPU_RGDAACn_M6RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M6RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M6RE field.
#define BR_MPU_RGDAACn_M6RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6RE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M6RE.
#define BF_MPU_RGDAACn_M6RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M6RE), uint32_t) & BM_MPU_RGDAACn_M6RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M6RE field to a new value.
#define BW_MPU_RGDAACn_M6RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M6RE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M7WE[30] (RW)
*
* Values:
* - 0 - Bus master 7 writes terminate with an access error and the write is not
* performed
* - 1 - Bus master 7 writes allowed
*/
//@{
#define BP_MPU_RGDAACn_M7WE (30U) //!< Bit position for MPU_RGDAACn_M7WE.
#define BM_MPU_RGDAACn_M7WE (0x40000000U) //!< Bit mask for MPU_RGDAACn_M7WE.
#define BS_MPU_RGDAACn_M7WE (1U) //!< Bit field size in bits for MPU_RGDAACn_M7WE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M7WE field.
#define BR_MPU_RGDAACn_M7WE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7WE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M7WE.
#define BF_MPU_RGDAACn_M7WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M7WE), uint32_t) & BM_MPU_RGDAACn_M7WE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M7WE field to a new value.
#define BW_MPU_RGDAACn_M7WE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7WE) = (v))
#endif
//@}
/*!
* @name Register MPU_RGDAACn, field M7RE[31] (RW)
*
* Values:
* - 0 - Bus master 7 reads terminate with an access error and the read is not
* performed
* - 1 - Bus master 7 reads allowed
*/
//@{
#define BP_MPU_RGDAACn_M7RE (31U) //!< Bit position for MPU_RGDAACn_M7RE.
#define BM_MPU_RGDAACn_M7RE (0x80000000U) //!< Bit mask for MPU_RGDAACn_M7RE.
#define BS_MPU_RGDAACn_M7RE (1U) //!< Bit field size in bits for MPU_RGDAACn_M7RE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MPU_RGDAACn_M7RE field.
#define BR_MPU_RGDAACn_M7RE(n) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7RE))
#endif
//! @brief Format value for bitfield MPU_RGDAACn_M7RE.
#define BF_MPU_RGDAACn_M7RE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MPU_RGDAACn_M7RE), uint32_t) & BM_MPU_RGDAACn_M7RE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M7RE field to a new value.
#define BW_MPU_RGDAACn_M7RE(n, v) (BITBAND_ACCESS32(HW_MPU_RGDAACn_ADDR(n), BP_MPU_RGDAACn_M7RE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_mpu_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All MPU module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_mpu
{
__IO hw_mpu_cesr_t CESR; //!< [0x0] Control/Error Status Register
uint8_t _reserved0[12];
struct {
__I hw_mpu_earn_t EARn; //!< [0x10] Error Address Register, slave port n
__I hw_mpu_edrn_t EDRn; //!< [0x14] Error Detail Register, slave port n
} SP[5];
uint8_t _reserved1[968];
struct {
__IO hw_mpu_rgdn_word0_t RGDn_WORD0; //!< [0x400] Region Descriptor n, Word 0
__IO hw_mpu_rgdn_word1_t RGDn_WORD1; //!< [0x404] Region Descriptor n, Word 1
__IO hw_mpu_rgdn_word2_t RGDn_WORD2; //!< [0x408] Region Descriptor n, Word 2
__IO hw_mpu_rgdn_word3_t RGDn_WORD3; //!< [0x40C] Region Descriptor n, Word 3
} RGD[12];
uint8_t _reserved2[832];
__IO hw_mpu_rgdaacn_t RGDAACn[12]; //!< [0x800] Region Descriptor Alternate Access Control n
} hw_mpu_t;
#pragma pack()
//! @brief Macro to access all MPU registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_MPU</code>.
#define HW_MPU (*(hw_mpu_t *) REGS_MPU_BASE)
#endif
#endif // __HW_MPU_REGISTERS_H__
// v22/130726/0.9
// EOF