rtt-f030/bsp/xplorer4330/libraries/lpc_ip/usbhs_001.h

129 lines
4.6 KiB
C
Raw Normal View History

2013-01-08 22:40:58 +08:00
/*
* @brief High-Speed USB registers and control functions
*
* @note
* Copyright(C) NXP Semiconductors, 2012
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __USBHS_001_H_
#define __USBHS_001_H_
#include "sys_config.h"
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup IP_USBHS_001 IP: USBHS Device, Host, & OTG register block and driver
* @ingroup IP_Drivers
* USB High-Speed Device, Host, & OTG
* Note: On the LPC18xx and LPC43xx, only USB0 supports OTG
* @{
*/
/**
* @brief USB High-Speed register block structure
*/
typedef struct { /*!< USB Structure */
__I uint32_t RESERVED0[64];
__I uint32_t CAPLENGTH; /*!< Capability register length */
__I uint32_t HCSPARAMS; /*!< Host controller structural parameters */
__I uint32_t HCCPARAMS; /*!< Host controller capability parameters */
__I uint32_t RESERVED1[5];
__I uint32_t DCIVERSION; /*!< Device interface version number */
__I uint32_t RESERVED2[7];
union {
__IO uint32_t USBCMD_H; /*!< USB command (host mode) */
__IO uint32_t USBCMD_D; /*!< USB command (device mode) */
};
union {
__IO uint32_t USBSTS_H; /*!< USB status (host mode) */
__IO uint32_t USBSTS_D; /*!< USB status (device mode) */
};
union {
__IO uint32_t USBINTR_H; /*!< USB interrupt enable (host mode) */
__IO uint32_t USBINTR_D; /*!< USB interrupt enable (device mode) */
};
union {
__IO uint32_t FRINDEX_H; /*!< USB frame index (host mode) */
__I uint32_t FRINDEX_D; /*!< USB frame index (device mode) */
};
__I uint32_t RESERVED3;
union {
__IO uint32_t PERIODICLISTBASE; /*!< Frame list base address */
__IO uint32_t DEVICEADDR; /*!< USB device address */
};
union {
__IO uint32_t ASYNCLISTADDR; /*!< Address of endpoint list in memory (host mode) */
__IO uint32_t ENDPOINTLISTADDR; /*!< Address of endpoint list in memory (device mode) */
};
__IO uint32_t TTCTRL; /*!< Asynchronous buffer status for embedded TT (host mode) */
__IO uint32_t BURSTSIZE; /*!< Programmable burst size */
__IO uint32_t TXFILLTUNING; /*!< Host transmit pre-buffer packet tuning (host mode) */
__I uint32_t RESERVED4[2];
__IO uint32_t ULPIVIEWPORT; /*!< ULPI viewport */
__IO uint32_t BINTERVAL; /*!< Length of virtual frame */
__IO uint32_t ENDPTNAK; /*!< Endpoint NAK (device mode) */
__IO uint32_t ENDPTNAKEN; /*!< Endpoint NAK Enable (device mode) */
__I uint32_t RESERVED5;
union {
__IO uint32_t PORTSC1_H; /*!< Port 1 status/control (host mode) */
__IO uint32_t PORTSC1_D; /*!< Port 1 status/control (device mode) */
};
__I uint32_t RESERVED6[7];
__IO uint32_t OTGSC; /*!< OTG status and control */
union {
__IO uint32_t USBMODE_H; /*!< USB mode (host mode) */
__IO uint32_t USBMODE_D; /*!< USB mode (device mode) */
};
__IO uint32_t ENDPTSETUPSTAT; /*!< Endpoint setup status */
__IO uint32_t ENDPTPRIME; /*!< Endpoint initialization */
__IO uint32_t ENDPTFLUSH; /*!< Endpoint de-initialization */
__I uint32_t ENDPTSTAT; /*!< Endpoint status */
__IO uint32_t ENDPTCOMPLETE; /*!< Endpoint complete */
__IO uint32_t ENDPTCTRL[6]; /*!< Endpoint control 0 */
} IP_USBHS_001_Type;
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBHS_001_H_ */