261 lines
10 KiB
C
261 lines
10 KiB
C
|
/**************************************************************************//**
|
||
|
|
* @file otg.h
|
||
|
|
* @version V0.10
|
||
|
|
* $Revision: 3 $
|
||
|
|
* $Date: 15/08/11 10:26a $
|
||
|
|
* @brief M451 Series OTG Driver Header File
|
||
|
|
*
|
||
|
|
* @note
|
||
|
|
* Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
|
||
|
|
*
|
||
|
|
******************************************************************************/
|
||
|
|
#ifndef __OTG_H__
|
||
|
|
#define __OTG_H__
|
||
|
|
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
/* Include related headers */
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
#include "M451Series.h"
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C"
|
||
|
|
{
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup Standard_Driver Standard Driver
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup OTG_Driver OTG Driver
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup OTG_EXPORTED_CONSTANTS OTG Exported Constants
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
/* OTG constant definitions */
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
#define OTG_VBUS_EN_ACTIVE_HIGH (0UL) /*!< USB VBUS power switch enable signal is active high. */
|
||
|
|
#define OTG_VBUS_EN_ACTIVE_LOW (1UL) /*!< USB VBUS power switch enable signal is active low. */
|
||
|
|
#define OTG_VBUS_ST_VALID_HIGH (0UL) /*!< USB VBUS power switch valid status is high. */
|
||
|
|
#define OTG_VBUS_ST_VALID_LOW (1UL) /*!< USB VBUS power switch valid status is low. */
|
||
|
|
|
||
|
|
|
||
|
|
/*@}*/ /* end of group OTG_EXPORTED_CONSTANTS */
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup OTG_EXPORTED_FUNCTIONS OTG Exported Functions
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
/* Define Macros and functions */
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to enable OTG function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will set OTGEN bit of OTG_CTL register to enable OTG function.
|
||
|
|
*/
|
||
|
|
#define OTG_ENABLE() (OTG->CTL |= OTG_CTL_OTGEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to disable OTG function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will clear OTGEN bit of OTG_CTL register to disable OTG function.
|
||
|
|
*/
|
||
|
|
#define OTG_DISABLE() (OTG->CTL &= ~OTG_CTL_OTGEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to enable USB PHY
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details When the USB role is selected as OTG device, use this macro to enable USB PHY.
|
||
|
|
* This macro will set OTGPHYEN bit of OTG_PHYCTL register to enable USB PHY.
|
||
|
|
*/
|
||
|
|
#define OTG_ENABLE_PHY() (OTG->PHYCTL |= OTG_PHYCTL_OTGPHYEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to disable USB PHY
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will clear OTGPHYEN bit of OTG_PHYCTL register to disable USB PHY.
|
||
|
|
*/
|
||
|
|
#define OTG_DISABLE_PHY() (OTG->PHYCTL &= ~OTG_PHYCTL_OTGPHYEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to enable ID detection function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will set IDDETEN bit of OTG_PHYCTL register to enable ID detection function.
|
||
|
|
*/
|
||
|
|
#define OTG_ENABLE_ID_DETECT() (OTG->PHYCTL |= OTG_PHYCTL_IDDETEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to disable ID detection function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will clear IDDETEN bit of OTG_PHYCTL register to disable ID detection function.
|
||
|
|
*/
|
||
|
|
#define OTG_DISABLE_ID_DETECT() (OTG->PHYCTL &= ~OTG_PHYCTL_IDDETEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to enable OTG wake-up function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will set WKEN bit of OTG_CTL register to enable OTG wake-up function.
|
||
|
|
*/
|
||
|
|
#define OTG_ENABLE_WAKEUP() (OTG->CTL |= OTG_CTL_WKEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to disable OTG wake-up function
|
||
|
|
* @param None
|
||
|
|
* @return None
|
||
|
|
* @details This macro will clear WKEN bit of OTG_CTL register to disable OTG wake-up function.
|
||
|
|
*/
|
||
|
|
#define OTG_DISABLE_WAKEUP() (OTG->CTL &= ~OTG_CTL_WKEN_Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to set the polarity of USB_VBUS_EN pin
|
||
|
|
* @param[in] u32Pol The polarity selection. Valid values are listed below.
|
||
|
|
* - \ref OTG_VBUS_EN_ACTIVE_HIGH
|
||
|
|
* - \ref OTG_VBUS_EN_ACTIVE_LOW
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set the polarity of external USB VBUS power switch enable signal.
|
||
|
|
*/
|
||
|
|
#define OTG_SET_VBUS_EN_POL(u32Pol) (OTG->PHYCTL = (OTG->PHYCTL & (~OTG_PHYCTL_VBENPOL_Msk)) | ((u32Pol)<<OTG_PHYCTL_VBENPOL_Pos))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to set the polarity of USB_VBUS_ST pin
|
||
|
|
* @param[in] u32Pol The polarity selection. Valid values are listed below.
|
||
|
|
* - \ref OTG_VBUS_ST_VALID_HIGH
|
||
|
|
* - \ref OTG_VBUS_ST_VALID_LOW
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set the polarity of external USB VBUS power switch status signal.
|
||
|
|
*/
|
||
|
|
#define OTG_SET_VBUS_STS_POL(u32Pol) (OTG->PHYCTL = (OTG->PHYCTL & (~OTG_PHYCTL_VBSTSPOL_Msk)) | ((u32Pol)<<OTG_PHYCTL_VBSTSPOL_Pos))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to enable OTG related interrupts
|
||
|
|
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
|
||
|
|
* - \ref OTG_INTEN_ROLECHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_VBEIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SRPFIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_HNPFIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_GOIDLEIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_IDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_PDEVIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_HOSTIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_BVLDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_AVLDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_VBCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SECHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SRPDETIEN_Msk
|
||
|
|
* @return None
|
||
|
|
* @details This macro will enable OTG related interrupts specified by u32Mask parameter.
|
||
|
|
*/
|
||
|
|
#define OTG_ENABLE_INT(u32Mask) (OTG->INTEN |= (u32Mask))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to disable OTG related interrupts
|
||
|
|
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
|
||
|
|
* - \ref OTG_INTEN_ROLECHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_VBEIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SRPFIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_HNPFIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_GOIDLEIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_IDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_PDEVIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_HOSTIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_BVLDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_AVLDCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_VBCHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SECHGIEN_Msk
|
||
|
|
* - \ref OTG_INTEN_SRPDETIEN_Msk
|
||
|
|
* @return None
|
||
|
|
* @details This macro will disable OTG related interrupts specified by u32Mask parameter.
|
||
|
|
*/
|
||
|
|
#define OTG_DISABLE_INT(u32Mask) (OTG->INTEN &= ~(u32Mask))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to get OTG related interrupt flags
|
||
|
|
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
|
||
|
|
* - \ref OTG_INTSTS_ROLECHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_VBEIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SRPFIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_HNPFIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_GOIDLEIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_IDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_PDEVIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_HOSTIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_BVLDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_AVLDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_VBCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SECHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SRPDETIF_Msk
|
||
|
|
* @return Interrupt flags of selected sources.
|
||
|
|
* @details This macro will return OTG related interrupt flags specified by u32Mask parameter.
|
||
|
|
*/
|
||
|
|
#define OTG_GET_INT_FLAG(u32Mask) (OTG->INTSTS & (u32Mask))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to clear OTG related interrupt flags
|
||
|
|
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
|
||
|
|
* - \ref OTG_INTSTS_ROLECHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_VBEIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SRPFIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_HNPFIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_GOIDLEIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_IDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_PDEVIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_HOSTIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_BVLDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_AVLDCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_VBCHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SECHGIF_Msk
|
||
|
|
* - \ref OTG_INTSTS_SRPDETIF_Msk
|
||
|
|
* @return None
|
||
|
|
* @details This macro will clear OTG related interrupt flags specified by u32Mask parameter.
|
||
|
|
*/
|
||
|
|
#define OTG_CLR_INT_FLAG(u32Mask) (OTG->INTSTS = (u32Mask))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This macro is used to get OTG related status
|
||
|
|
* @param[in] u32Mask The combination of user specified source. Valid values are listed below.
|
||
|
|
* - \ref OTG_STATUS_OVERCUR_Msk
|
||
|
|
* - \ref OTG_STATUS_IDSTS_Msk
|
||
|
|
* - \ref OTG_STATUS_SESSEND_Msk
|
||
|
|
* - \ref OTG_STATUS_BVLD_Msk
|
||
|
|
* - \ref OTG_STATUS_AVLD_Msk
|
||
|
|
* - \ref OTG_STATUS_VBUSVLD_Msk
|
||
|
|
* @return The user specified status.
|
||
|
|
* @details This macro will return OTG related status specified by u32Mask parameter.
|
||
|
|
*/
|
||
|
|
#define OTG_GET_STATUS(u32Mask) (OTG->STATUS & (u32Mask))
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/*@}*/ /* end of group OTG_EXPORTED_FUNCTIONS */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group OTG_Driver */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group Standard_Driver */
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
#endif //__OTG_H__
|
||
|
|
|
||
|
|
/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/
|