rtt-f030/bsp/stm3210/rtconfig.py

# toolchains options
ARCH='arm'
CPU='stm32'
CROSS_TOOL='keil'

if  CROSS_TOOL == 'gcc':
	PLATFORM 	= 'gcc'
	EXEC_PATH 	= 'D:/SourceryGCC/bin'
elif CROSS_TOOL == 'keil':
	PLATFORM 	= 'armcc'
	EXEC_PATH 	= 'E:/Keil'

BUILD = 'debug'
STM32_TYPE = 'STM32F10X_HD'

if PLATFORM == 'gcc':
    # toolchains
    PREFIX = 'arm-none-eabi-'
    CC = PREFIX + 'gcc'
    AS = PREFIX + 'gcc'
    AR = PREFIX + 'ar'
    LINK = PREFIX + 'gcc'
    TARGET_EXT = 'axf'
    SIZE = PREFIX + 'size'
    OBJDUMP = PREFIX + 'objdump'
    OBJCPY = PREFIX + 'objcopy'

    DEVICE = ' -mcpu=cortex-m3 -mthumb'
    CFLAGS = DEVICE + ' -DRT_USING_MINILIBC'
    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-stm32.map,-cref,-u,Reset_Handler -T stm32_rom.ld'

    CPATH = ''
    LPATH = ''

    if BUILD == 'debug':
        CFLAGS += ' -O0 -gdwarf-2'
        AFLAGS += ' -gdwarf-2'
    else:
        CFLAGS += ' -O2'

    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'

elif PLATFORM == 'armcc':
    # toolchains
    CC = 'armcc'
    AS = 'armasm'
    AR = 'armar'
    LINK = 'armlink'
    TARGET_EXT = 'axf'

    DEVICE = ' --device DARMSTM'
    CFLAGS = DEVICE + ' --apcs=interwork'
    AFLAGS = DEVICE
    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32_rom.sct'

    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'

    EXEC_PATH += '/arm/bin40/'

    if BUILD == 'debug':
        CFLAGS += ' -g -O0'
        AFLAGS += ' -g'
    else:
        CFLAGS += ' -O2'

    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'

elif PLATFORM == 'iar':
    # toolchains
    CC = 'iccarm'
    AS = 'iasmarm'
    AR = 'iarchive'
    LINK = 'ilinkarm'
    TARGET_EXT = 'out'

    DEVICE = ' --cpu DARMSTM --thumb'

    CFLAGS = ''
    AFLAGS = ''
    LFLAGS = ' --config stm32f10x_flash.icf'

    EXEC_PATH += '/arm/bin/'
    POST_ACTION = ''